Rear seat latch covers

[Lyle]

Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
Lyle

[Eric Geiger]

looks great, any chance of you making more?
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I > vacuum formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> Lyle

[Lyle]

Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
Lyle

--- In
anzhonda600owners@yahoogroups.com
, Eric Geiger wrote:
> looks great, any chance of you making more?
> Eric J. Geiger
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com
> On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> Lyle

[Eric Geiger]

Lyle shoot me a direct email,  i tried to send u one but it got bounced back.
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Jan 31, 2013, at 9:22 PM, Lyle wrote:
> Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
> It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
> Lyle
> --- In
> anzhonda600owners@yahoogroups.com
> , Eric Geiger wrote:
> > looks great, any chance of you making more?
> > Eric J. Geiger
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@...
> www.prgnocturne.com
> > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum > formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> > Lyle

[Lyle]

I will be making a few more Coupe latch cover set's to sell. Anyone interested please go to my website and send me an email and I will try to come up with a price. The more I make
the cheaper they will be.
Thanks for the interest.
http://tru-craft.com/
Lyle

--- In
anzhonda600owners@yahoogroups.com
, Eric Geiger wrote:
> Lyle shoot me a direct email, i tried to send u one but it got bounced back.
> Eric J. Geiger
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com
> On Jan 31, 2013, at 9:22 PM, Lyle wrote:
> Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
> It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
> Lyle
> --- In
anzhonda600owners@yahoogroups.com
, Eric Geiger wrote:
> > looks great, any chance of you making more?
> > Eric J. Geiger
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@
> > www.prgnocturne.com
> > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> > Lyle

[Victor Hernandez]

Eric, anyone, Any chance you'll mold some dome light lenses any time soon? Anybody have a spare lens to sell? For a Z600 Coupe. Thanks!

On Thu, Jan 31, 2013 at 9:22 PM, Lyle
�
> Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
> It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
> Lyle
> --- In
> anzhonda600owners@yahoogroups.com
> , Eric Geiger wrote:
> > looks great, any chance of you making more?
> > Eric J. Geiger
> > PRG Nocturne
> XXX-XXX-XXXX
> phone
> XXX-XXX-XXXX
> fax
> XXX-XXX-XXXX
> mobile
> > egeiger@...
> www.prgnocturne.com
> > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> > Lyle

[Eric Geiger]

Not currently.  Bill C has a mold we just need to get him to start making them again.  Last I heard he was waiting on a company to get back to him.
Unless bill has issues then maybe I would look into it.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On Feb 1, 2013, at 11:52 PM, "Victor Hernandez" wrote:
Eric, anyone,
Any chance you'll mold some dome light lenses any time soon? Anybody have a spare lens to sell? For a Z600 Coupe. Thanks!
On Thu, Jan 31, 2013 at 9:22 PM, Lyle
Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
> It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
> Lyle
> --- In
> anzhonda600owners@yahoogroups.com
> , Eric Geiger wrote:
> > looks great, any chance of you making more?
> > Eric J. Geiger
> > PRG Nocturne
> XXX-XXX-XXXX
> phone
> XXX-XXX-XXXX
> fax
> XXX-XXX-XXXX
> mobile
> > egeiger@...
> www.prgnocturne.com
> > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum > formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> > Lyle

[Victor Hernandez]

That would be awesome, let us know Bill.

On Fri, Feb 1, 2013 at 11:45 PM, Eric Geiger
�
> Not currently. �Bill C has a mold we just need to get him to start making them again. �Last I heard he was waiting on a company to get back to him. �
> Unless bill has issues then maybe I would look into it. �
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX
> phone
> XXX-XXX-XXXX
> fax
> XXX-XXX-XXXX
> mobile
> egeiger@...
> www.prgnocturne.com
> On Feb 1, 2013, at 11:52 PM, "Victor Hernandez" vluishernandez@...
> > wrote:
> > �
> > Eric, anyone,
> > Any chance you'll mold some dome light lenses any time soon? Anybody have a spare lens to sell? For a Z600 Coupe. Thanks!
> > On Thu, Jan 31, 2013 at 9:22 PM, Lyle
> > > lyletrudell@...
> > wrote:
> > > �
> > > Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
> > > It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
> > > Lyle
> > > --- In
> > > anzhonda600owners@yahoogroups.com
> > > , Eric Geiger wrote:
> > > > looks great, any chance of you making more?
> > > > Eric J. Geiger
> > > > PRG Nocturne
> > > XXX-XXX-XXXX
> > > phone
> > > XXX-XXX-XXXX
> > > fax
> > > XXX-XXX-XXXX
> > > mobile
> > > > egeiger@...
> > > www.prgnocturne.com
> > > > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > > > Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I vacuum > > > formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> > > > Lyle

[Eric Geiger]

you already know i want a set of these.  i also heard steve got ahold of you regrading the rear inside hatch panel.  the large one that covers the tail lights, I'm totally interested in these as well
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Feb 1, 2013, at 8:59 AM, Lyle wrote:
> I will be making a few more Coupe latch cover set's to sell. Anyone interested please go to my website and send me an email and I will try to come up with a price. The more I make
> the cheaper they will be.
> Thanks for the interest.
> http://tru-craft.com/
> Lyle
> --- In
> anzhonda600owners@yahoogroups.com
> , Eric Geiger wrote:
> > Lyle shoot me a direct email, i tried to send u one but it got bounced back.
> > Eric J. Geiger
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@...
> www.prgnocturne.com
> > On Jan 31, 2013, at 9:22 PM, Lyle wrote:
> > Hi Eric, glad you like them. I have molded a few set's and I will be finishing them this week. Not sure how I should sell them, this website or Ebay? Price will depend on how many I make.
> > It's nice that we are getting together and making parts for our Honda's! Do we have a list of available parts?
> > Lyle
> > --- In
> anzhonda600owners@yahoogroups.com
> , Eric Geiger wrote:
> > > looks great, any chance of you making more?
> > > Eric J. Geiger
> > > PRG Nocturne
> > > XXX-XXX-XXXX phone
> > > XXX-XXX-XXXX fax
> > > XXX-XXX-XXXX mobile
> > > egeiger@
> www.prgnocturne.com
> > > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > > Hi all. Check out the rear seat latch covers I made for my Coupe in the photo section. They were a lot of work. I hand made a mold for the right and left covers from wood and clay, using my old broken ones as a pattern. Then using an ABS plastic sheet I > vacuum formed the basic shape. Using the mold to hold the parts I then CNC machined the cut-outs and trimmed the outside by hand. They fit great and they look like the originals. Gives the rear area a factory finished look.
> > > Lyle

[aahondaowner]

Lyle;
The covers look great.  There is a picture of some coupe dome light covers on the group site.  I made them out of a high strength plastic hard enough to allow polishing but thin enough to allow light through them.  They should be the last one you will ever need.
Bill

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> Eric
> Geiger
> Sent:
> Saturday, February 02, 2013 12:30 PM
> To:
>
> Subject:
> Re:
> [anzhonda600owners] Rear seat latch covers
> you already know i want a set of these.  i also heard steve got ahold > of you regrading the rear inside hatch panel.  the large one that covers > the tail lights, I'm totally interested in these as well
> Eric J. Geiger
> PRG
> Nocturne
> XXX-XXX-XXXX
>  phone
> XXX-XXX-XXXX
>  fax
> XXX-XXX-XXXX
>  mobile
> egeiger@...
> www.prgnocturne.com
> On Feb 1, 2013, at 8:59 AM, Lyle wrote:
> > I will be making a few more Coupe latch cover set's to sell. Anyone > > interested please go to my website and send me an email and I will try to > > come up with a price. The more I make > > the cheaper they will be.
> > Thanks
> > for the interest.
> > http://tru-craft.com/
> > Lyle
> > --- In
> > anzhonda600owners@yahoogroups.com
> > ,
> > Eric Geiger wrote:
> > > Lyle shoot me a direct email, i tried to
> > send u one but it got bounced back.
> > > Eric J.
> > Geiger
> > > PRG
> > Nocturne
> > > XXX-XXX-XXXX phone
> > > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > > egeiger@...
> > www.prgnocturne.com
> > On Jan 31, 2013, at 9:22 PM, Lyle wrote:
> > Hi Eric, glad you like them. I have molded a few set's and I will be > > finishing them this week. Not sure how I should sell them, this website or > > Ebay? Price will depend on how many I make.
> > > It's nice that we are
> > getting together and making parts for our Honda's! Do we have a list of > > available parts?
> > > Lyle
> > > --- In
> > anzhonda600owners@yahoogroups.com
> > , Eric Geiger wrote:
> > > > looks great, any chance of
> > you making more?
> > > > Eric J. Geiger
> > > > PRG
> > Nocturne
> > > > XXX-XXX-XXXX phone
> > > > XXX-XXX-XXXX
> > fax
> > > > XXX-XXX-XXXX mobile
> > > > egeiger@
> > www.prgnocturne.com
> > > > On Jan 31, 2013, at 8:49 PM, Lyle wrote:
> > > > Hi all. Check out the rear seat
> > latch covers I made for my Coupe in the photo section. They were a lot of > > work. I hand made a mold for the right and left covers from wood and clay, > > using my old broken ones as a pattern. Then using an ABS plastic sheet I > > vacuum formed the basic shape. Using the mold to hold the parts I then CNC > > machined the cut-outs and trimmed the outside by hand. They fit great and > > they look like the originals. Gives the rear area a factory finished > > look.
> > > > Lyle