clutch plate or linings

Archived posts from the 2 Cylinder Hondas Yahoo Group
Love
Posts: 2
Joined: Tue Sep 12, 2006 5:10 am

Re: clutch plate & linings

Post by Love »

On a similar note, a N360 is for sale in Willits CA.  Not running and $1950.  Looks like lite pink, or flesh tone (crayon) color.  New hood is in order.  Can't make out if it's Right or Left HD.
Link:
http://sfbay.craigslist.org/nby/cto/XXX-XXX-XXXX.html Not mine, just saw it.
Bruce D.
Santa Clara, CA From:
Greg To:
2cylinderhondas@yahoogroups.com Sent:
Thursday, July 2, 2009 1:29:50 AM Subject:
[2cylinderhondas] Re: clutch plate & linings
Miles, N360 palte is 18 spline on a 20mm shaft - that must then be the same as the N600 is it? Greg
--- In
2cylinderhondas@ yahoogroups. com
, "Miles" wrote:
> What I do for clutches is 3 years ago I bought 2 new Honda OEM discs from Mike O. I used one and I still have the other one. I'm installing the remaining one in an engine I have been rebuilding for the past 5 years for a friend in Redondo Beach.
> The discs I used to get from Napa said Japan & N360 on them. They were cheap, my cost about $35ea, and they worked great.
> I had a machine shop make me a fixture for the pressure plates for surfacing. The pressure plate is pretty flexible and needs to be supported in the center during surfacing. The clutch drum on the other hand can just be surfaced along with the ears.
> Miles
> --- In
2cylinderhondas@ yahoogroups. com
, "Greg" wrote:
> > Mark, I'm in WA. BGT must have moved to Dandenong as that's the only Whitepages listing. I've emailed them.
> > Bill, thanks for that tip on MGB linings.
> > --- In
2cylinderhondas@ yahoogroups. com
, "Mark Kuran" wrote:
> > > Greg, what state are you in? BGT in Hawthorn, Victoria were able to one for me a few years back.
> > > Mark.
> > > --- In
2cylinderhondas@ yahoogroups. com
, "Greg" wrote:
> > > > It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
> > > > Hey Miles, what do you do for clutches?
John Ph. Graf
Posts: 30
Joined: Fri Mar 16, 2007 12:46 am

Re: clutch plate & linings

Post by John Ph. Graf »

I think it is left hand drive based on the photo that shows part of the radio to the right of the instrument cluster.
On Jul 2, 2009, at 7:09 PM, Bruce Dewing wrote:
> On a similar note, a N360 is for sale in Willits CA.� Not running and $1950.� Looks like lite pink, or flesh tone (crayon) color.� New hood is in order.� Can't make out if it's Right or Left HD.
Miles
Posts: 361
Joined: Mon Aug 04, 2003 5:32 pm

N360 Sport Touring

Post by Miles »

That guy emailed me pics of the car. It has a tachometer factory, but has been sitting 30 years. I think he got it from a guy in Petaluma who got it from eBay. 2 sold on eBay that Bruce Whiting bought but Bruce couldn't get them in time so they got sold again.
It's definately a LHD car. It has fender mirrors on the hood, the hood is flat, no hump - no canned ham hump!, It has fog lamps and only 9700 miles on the odometer, it has the flat front and rear wrap around bumpers, 3 spoke steering wheel, original color was yellow. Here's the original ad:
I have a non running N360 for sale in california. This is not a 600.
It has like new interior and shows just under 10,000 miles. It has been sitting for 30 years. The hood needs to be fixed or replaced. I have the original paper work and owners manual for it.
I'm located in Northern California. 2500.00 OBO
Feel free to call me at XXX-XXX-XXXX.
Lee
--- In
2cylinderhondas@yahoogroups.com
, "John Ph. Graf" wrote:
> I think it is left hand drive based on the photo that shows part of
> the radio to the right of the instrument cluster.
> On Jul 2, 2009, at 7:09 PM, Bruce Dewing wrote:
> > On a similar note, a N360 is for sale in Willits CA. Not running
> > and $1950. Looks like lite pink, or flesh tone (crayon) color.
> > New hood is in order. Can't make out if it's Right or Left HD.
Post Reply