replacement coil

Kris Dahl · Post by **Kris Dahl** » Mon Jul 16, 2007 11:36 am

May be a stupid question, but how would I go about finding an
aftermarket replacement ignition coil for the Z/N600s? Most of the
coils I see have just the one high voltage output, but the Honda one
has one per spark plug.
I'm not real familar with external coils, etc. so please forgive my
ignorance. Any ideas?
-k

mterrens · Post by **mterrens** » Mon Jul 16, 2007 11:40 am

Miles is selling an NOS one right now, but it's getting a bit steep...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0144459572

Kris Dahl · Post by **Kris Dahl** » Mon Jul 16, 2007 11:56 am

Yeah I'm the losing high bidder right now.
-k

On Jul 16, 2007, at 11:39 AM, Steven Michelsen wrote:
> Miles is selling an NOS one right now, but it's getting a bit steep...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0144459572
> ----- Original Message -----
> From: "Kris Dahl" To: Sent: Monday, July 16, 2007 2:35 PM
> Subject: [2cylinderhondas] replacement coil
> > May be a stupid question, but how would I go about finding an
> > aftermarket replacement ignition coil for the Z/N600s? Most of the
> > coils I see have just the one high voltage output, but the Honda one
> > has one per spark plug.
> > I'm not real familar with external coils, etc. so please forgive my
> > ignorance. Any ideas?
> > -k

jpro8071 · Post by **jpro8071** » Mon Jul 16, 2007 8:15 pm

Not a stupid question . . .
Motorcycle salvage shops can sell you a similar coil - that's the
route I went in the past. I'm sure others on the list can chime in -
but it's pretty much the same as any other 12V twin motorcycle.

--- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> May be a stupid question, but how would I go about finding an
> aftermarket replacement ignition coil for the Z/N600s? Most of the
> coils I see have just the one high voltage output, but the Honda one
> has one per spark plug.
> I'm not real familar with external coils, etc. so please forgive my
> ignorance. Any ideas?
> -k

infinkc · Post by **infinkc** » Tue Jul 17, 2007 9:36 am

there is a used one also
http://cgi.ebay.com/ebaymotors/70-72-HO ... OUPE-COIL-
ASSEMBLY-
COMPLETE_W0QQcmdZViewItemQQcategoryZ33689QQihZ003QQitemZ130126808698Q
QrdZ1

--- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> Yeah I'm the losing high bidder right now.
> -k
> On Jul 16, 2007, at 11:39 AM, Steven Michelsen wrote:
> > Miles is selling an NOS one right now, but it's getting a bit
steep...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0144459572
> > ----- Original Message -----
> > From: "Kris Dahl"
> > To: > Sent: Monday, July 16, 2007 2:35 PM
> > Subject: [2cylinderhondas] replacement coil
> > > May be a stupid question, but how would I go about finding an
> > > aftermarket replacement ignition coil for the Z/N600s? Most of
the
> > > coils I see have just the one high voltage output, but the
Honda one
> > > has one per spark plug.
> > > I'm not real familar with external coils, etc. so please
forgive my
> > > ignorance. Any ideas?
> > > -k

kamron gehlen · Post by **kamron gehlen** » Tue Jul 17, 2007 11:29 pm

does anyone know how long the cam chain in an n600 sedan should be
infinkc wrote: there is a used one also
http://cgi.ebay.com/ebaymotors/70-72-HO ... OUPE-COIL-
ASSEMBLY-
COMPLETE_W0QQcmdZViewItemQQcategoryZ33689QQihZ003QQitemZ130126808698Q
QrdZ1

--- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> Yeah I'm the losing high bidder right now.
> -k
> On Jul 16, 2007, at 11:39 AM, Steven Michelsen wrote:
> > Miles is selling an NOS one right now, but it's getting a bit
steep...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0144459572
> > ----- Original Message -----
> > From: "Kris Dahl"
> > To: > Sent: Monday, July 16, 2007 2:35 PM
> > Subject: [2cylinderhondas] replacement coil
> > > May be a stupid question, but how would I go about finding an
> > > aftermarket replacement ignition coil for the Z/N600s? Most of
the
> > > coils I see have just the one high voltage output, but the
Honda one
> > > has one per spark plug.
> > > I'm not real familar with external coils, etc. so please
forgive my
> > > ignorance. Any ideas?
> > > -k

friend · Post by **friend** » Wed Jul 18, 2007 12:12 am

106 pins
-----Original Message-----
From: 2cylinderhondas@yahoogroups.com
[mailto:2cylinderhondas@yahoogroups.com]On Behalf Of kamron gehlen
Sent: Tuesday, July 17, 2007 10:05 AM
To: 2cylinderhondas@yahoogroups.com
Subject: Re: [2cylinderhondas] Re: replacement coil
does anyone know how long the cam chain in an n600 sedan should be
infinkc wrote: there is a used one also
http://cgi.ebay.com/ebaymotors/70-72-HO ... OUPE-COIL-
ASSEMBLY-
COMPLETE_W0QQcmdZViewItemQQcategoryZ33689QQihZ003QQitemZ130126808698Q
QrdZ1

--- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> Yeah I'm the losing high bidder right now.
> -k
> On Jul 16, 2007, at 11:39 AM, Steven Michelsen wrote:
> > Miles is selling an NOS one right now, but it's getting a bit
steep...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0144459572
> > ----- Original Message -----
> > From: "Kris Dahl"
> > To: > Sent: Monday, July 16, 2007 2:35 PM
> > Subject: [2cylinderhondas] replacement coil
> > > May be a stupid question, but how would I go about finding an
> > > aftermarket replacement ignition coil for the Z/N600s? Most of
the
> > > coils I see have just the one high voltage output, but the
Honda one
> > > has one per spark plug.
> > > I'm not real familar with external coils, etc. so please
forgive my
> > > ignorance. Any ideas?
> > > -k

friend · Post by **friend** » Wed Jul 18, 2007 12:15 am

Kris:
I put new wires on them and use the same coil. I have a picture
tutorial on tha ANZhonda600owners Yahoo Group site, walks you through
putting on new wires. Not hard and the finished product works great. I
have only found one coil I couldn't fix in all the years I have been working
on Honda 600's.
Bill
-----Original Message-----
From: 2cylinderhondas@yahoogroups.com
[mailto:2cylinderhondas@yahoogroups.com]On Behalf Of kamron gehlen
Sent: Tuesday, July 17, 2007 10:05 AM
To: 2cylinderhondas@yahoogroups.com
Subject: Re: [2cylinderhondas] Re: replacement coil
does anyone know how long the cam chain in an n600 sedan should be
infinkc wrote: there is a used one also
http://cgi.ebay.com/ebaymotors/70-72-HO ... OUPE-COIL-
ASSEMBLY-
COMPLETE_W0QQcmdZViewItemQQcategoryZ33689QQihZ003QQitemZ130126808698Q
QrdZ1

--- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> Yeah I'm the losing high bidder right now.
> -k
> On Jul 16, 2007, at 11:39 AM, Steven Michelsen wrote:
> > Miles is selling an NOS one right now, but it's getting a bit
steep...
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0144459572
> > ----- Original Message -----
> > From: "Kris Dahl"
> > To: > Sent: Monday, July 16, 2007 2:35 PM
> > Subject: [2cylinderhondas] replacement coil
> > > May be a stupid question, but how would I go about finding an
> > > aftermarket replacement ignition coil for the Z/N600s? Most of
the
> > > coils I see have just the one high voltage output, but the
Honda one
> > > has one per spark plug.
> > > I'm not real familar with external coils, etc. so please
forgive my
> > > ignorance. Any ideas?
> > > -k

aaron tompkins · Post by **aaron tompkins** » Wed Jul 18, 2007 2:51 am

i purchased an high voltage coil at local bike shop $150
jpro8071 wrote: Not a stupid question . . .
Motorcycle salvage shops can sell you a similar coil - that's the
route I went in the past. I'm sure others on the list can chime in -
but it's pretty much the same as any other 12V twin motorcycle.

--- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> May be a stupid question, but how would I go about finding an
> aftermarket replacement ignition coil for the Z/N600s? Most of the
> coils I see have just the one high voltage output, but the Honda one
> has one per spark plug.
> I'm not real familar with external coils, etc. so please forgive my
> ignorance. Any ideas?
> -k

dale · Post by **dale** » Wed Jul 18, 2007 10:41 pm

--- In 2cylinderhondas@yahoogroups.com, aaron tompkins
wrote:

> i purchased an high voltage coil at local bike shop $150
> jpro8071 wrote: Not

a stupid question . . .

> Motorcycle salvage shops can sell you a similar coil - that's the
> route I went in the past. I'm sure others on the list can chime in -
> but it's pretty much the same as any other 12V twin motorcycle.
> --- In
2cylinderhondas@yahoogroups.com
, Kris Dahl wrote:
> > May be a stupid question, but how would I go about finding an
> > aftermarket replacement ignition coil for the Z/N600s? Most of the
> > coils I see have just the one high voltage output, but the Honda one
> > has one per spark plug.
> > I'm not real familar with external coils, etc. so please forgive my
> > ignorance. Any ideas?
> > -k
> I just noticed, on E-Bay, they have an Original coil for $39.95

keyword: honda-600-sedan.