N600 Muffler

[honda600wiz]

Thank you for this information.
Does anyone know if there is a new muffler and silencer that works on this
car? I can't be the first one to have this problem and I doubt everyone
has solved it with a used one. Please advise if you have input on where to
get a new suitable one locally.
Thanks!
Doug
At 09:42 PM 7/14/03 -0500, you wrote:

>Doug -- See if Mike O'connor has a good original sedan muffler. The
>muffler helps cut the noise but the silencer pipe that connects to it
>makes a big difference. If that's shot then the car will be noisy even
>with a new muffler. I found this out on my '71 coupe. I put a factory
>new muffler and it made no difference in the high noise level. Then I put
>a good used silencer pipe and it really made a difference. The factory
>coupe tail pipe has a little silencer built on the end and that helps a
>lot. I have one on my restored '72 coupe and it's a pretty quiet car,
>although at freeway speeds they all roar.

Douglas Stark
STARK CONSULTANTS, INC.
One Memorial Square, Whitinsville, MA 01588
http://www.starkconsult.com XXX-XXX-XXXX

[Douglas]

Hi there. I hope everyone is well.
I just need the muffler can in the back for my N600 sedan. Has anyone purchased a muffler from some place on line recently that is small, quiet and fits into the small area that exists for the muffler on the N600? Can you give me a link to what you purchased exactly?
Last time the muffler shop happened to have a very small one that fit but now they said to me "find something and bring it back to us"...
Thanks very much!
Doug

[richmccolman]

I believe the Imco CM-43 was recommended in a group discussion a while back:
http://www.summitracing.com/parts/IMO-CM43/
Looks to be out of stock currently, but expected in mid-October. Nice price.
Richard

--- In
2cylinderhondas@yahoogroups.com
, "Douglas" wrote:
> Hi there. I hope everyone is well.
> I just need the muffler can in the back for my N600 sedan. Has anyone purchased a muffler from some place on line recently that is small, quiet and fits into the small area that exists for the muffler on the N600? Can you give me a link to what you purchased exactly?
> Last time the muffler shop happened to have a very small one that fit but now they said to me "find something and bring it back to us"...
> Thanks very much!
> Doug

[richmccolman]

... but I think brackets will need to be made for it.
Richard

--- In
2cylinderhondas@yahoogroups.com
, "richmccolman" wrote:
> I believe the Imco CM-43 was recommended in a group discussion a while back:
http://www.summitracing.com/parts/IMO-CM43/
> Looks to be out of stock currently, but expected in mid-October. Nice price.
> Richard
> --- In
2cylinderhondas@yahoogroups.com
, "Douglas" wrote:
> > Hi there. I hope everyone is well.
> > I just need the muffler can in the back for my N600 sedan. Has anyone purchased a muffler from some place on line recently that is small, quiet and fits into the small area that exists for the muffler on the N600? Can you give me a link to what you purchased exactly?
> > Last time the muffler shop happened to have a very small one that fit but now they said to me "find something and bring it back to us"...
> > Thanks very much!
> > Doug

[Douglas]

Thank you but I actually purchased that very muffler in the past and ended up reselling it on ebay because it did not fit. I don't recall the brackets being an issue. It was just too large around.
Any other suggestions for mufflers?
Thanks!
Doug

--- In
2cylinderhondas@yahoogroups.com
, "richmccolman" wrote:
> I believe the Imco CM-43 was recommended in a group discussion a while back:
http://www.summitracing.com/parts/IMO-CM43/
> Looks to be out of stock currently, but expected in mid-October. Nice price.
> Richard
> --- In
2cylinderhondas@yahoogroups.com
, "Douglas" wrote:
> > Hi there. I hope everyone is well.
> > I just need the muffler can in the back for my N600 sedan. Has anyone purchased a muffler from some place on line recently that is small, quiet and fits into the small area that exists for the muffler on the N600? Can you give me a link to what you purchased exactly?
> > Last time the muffler shop happened to have a very small one that fit but now they said to me "find something and bring it back to us"...
> > Thanks very much!
> > Doug

[feltonminicycle]

CM43 is the one I installed on my sedan. I did all my own welding and bending. As I recall only 1" larger in diameter than the stock one. I either put it on Dinky or Truckster and I think the original drop bracket went away. It's been 10 years or so.
Miles

--- In
2cylinderhondas@yahoogroups.com
, "Douglas" wrote:
> Thank you but I actually purchased that very muffler in the past and ended up reselling it on ebay because it did not fit. I don't recall the brackets being an issue. It was just too large around.
> Any other suggestions for mufflers?
> Thanks!
> Doug
> --- In
2cylinderhondas@yahoogroups.com
, "richmccolman" wrote:
> > I believe the Imco CM-43 was recommended in a group discussion a while back:
http://www.summitracing.com/parts/IMO-CM43/
> > Looks to be out of stock currently, but expected in mid-October. Nice price.
> > Richard
> > --- In
2cylinderhondas@yahoogroups.com
, "Douglas" wrote:
> > > Hi there. I hope everyone is well.
> > > I just need the muffler can in the back for my N600 sedan. Has anyone purchased a muffler from some place on line recently that is small, quiet and fits into the small area that exists for the muffler on the N600? Can you give me a link to what you purchased exactly?
> > > Last time the muffler shop happened to have a very small one that fit but now they said to me "find something and bring it back to us"...
> > > Thanks very much!
> > > Doug

[Douglas]

Hi. Thanks to those that responded, but I wondered if anyone knows of a muffler other than the CM43 that they have used on a Sedan successfully.
Thanks!
Doug

[r savard]

i use a Triump muffler

> From:
> Douglas
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Monday, October 1, 2012 8:13 AM
> Subject:
> [2cylinderhondas] N600 Muffler
> Hi. Thanks to those that responded, but I wondered if anyone knows of a muffler other than the CM43 that they have used on a Sedan successfully.
> Thanks!
> Doug