O-rings Viton

lyletrudell · Post by **lyletrudell** » Sat May 29, 2010 2:39 pm

Everybody is buying single o-rings, we need to get together on this.
I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :)
I bought 25-50 Viton O-rings because they are real cheap that way.
I have all the o-rings for the carb and manifold.
I also have a few o-rings for the brake booster assembly.
They fit and are Viton so they will last in our alcohol fuel.
If anyone wants to buy my extras let me know.
Lyle

Linda Classon · Post by **Linda Classon** » Sat May 29, 2010 5:20 pm

On May 29, 2010, at 5:36 PM, lyletrudell wrote:

> Everybody is buying single o-rings, we need to get together on this.
> I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :) > I bought 25-50 Viton O-rings because they are real cheap that way.
> I have all the o-rings for the carb and manifold.
> I also have a few o-rings for the brake booster assembly.
> They fit and are Viton so they will last in our alcohol fuel.
> If anyone wants to buy my extras let me know.
> Lyle

lyletrudell · Post by **lyletrudell** » Sun May 30, 2010 6:39 am

Just email me.
I guess I could just put them in an envelope.
Have got a lot of good info from the 2 clubs, so just my way of helping out.
Craft59@...
Lyle

--- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> Everybody is buying single o-rings, we need to get together on this.
> I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :)
> I bought 25-50 Viton O-rings because they are real cheap that way.
> I have all the o-rings for the carb and manifold.
> I also have a few o-rings for the brake booster assembly.
> They fit and are Viton so they will last in our alcohol fuel.
> If anyone wants to buy my extras let me know.
> Lyle

bottom cop · Post by **bottom cop** » Sun May 30, 2010 7:03 pm

I'm sure we all appreciate the offer of the O-rings but why not post all of the measurements in one message. That would really be helpful.

--- On
Sun, 5/30/10, lyletrudell

wrote:
> From: lyletrudell
> Subject: [2cylinderhondas] Re: O-rings Viton
> To: 2cylinderhondas@yahoogroups.com
> Date: Sunday, May 30, 2010, 9:39 AM
> Just email me.
> I guess I could just put them in an envelope.
> Have got a lot of good info from the 2 clubs, so just my way of helping out.
> Craft59@...
> Lyle
> --- In
> 2cylinderhondas@yahoogroups.com
> , "lyletrudell" wrote:
> > Everybody is buying single o-rings, we need to get together on this.
> > I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :) > > I bought 25-50 Viton O-rings because they are real cheap that way.
> > I have all the o-rings for the carb and manifold.
> > I also have a few o-rings for the brake booster assembly.
> > They fit
> and are Viton so they will last in our alcohol fuel.
> > If anyone wants to buy my extras let me know.
> > Lyle
> ------------------------------------

lyletrudell · Post by **lyletrudell** » Mon May 31, 2010 10:16 am

Good idea, if you can get a good close up view of the carb parts and the brake booster. Then we can put it in the database for everyone to see were all the orings go and what size they are.
Lyle

--- In
2cylinderhondas@yahoogroups.com
, bottom cop wrote:
> I'm sure we all appreciate the offer of the O-rings but why not post all of the measurements in one message.� That would really be helpful.
> --- On Sun, 5/30/10, lyletrudell wrote:
> From: lyletrudell
> Subject: [2cylinderhondas] Re: O-rings Viton
> To:
2cylinderhondas@yahoogroups.com
> Date: Sunday, May 30, 2010, 9:39 AM
> Just email me.
> I guess I could just put them in an envelope.
> Have got a lot of good info from the 2 clubs, so just my way of helping out.
> Craft59@...
> Lyle
> --- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> > Everybody is buying single o-rings, we need to get together on this.
> > I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :)
> > I bought 25-50 Viton O-rings because they are real cheap that way.
> > I have all the o-rings for the carb and manifold.
> > I also have a few o-rings for the brake booster assembly.
> > They fit and are Viton so they will last in our alcohol fuel.
> > If anyone wants to buy my extras let me know.
> > Lyle
> ------------------------------------

lyletrudell · Post by **lyletrudell** » Tue Jun 01, 2010 10:30 am

Hi, if anyone is interested in my extra O-rings email me.
The Viton O-rings I have:
1)carb jet small
1)carb jet large
1)carb air screw
1)carb float needle seat
1)carb fuel solenoid
1)carb to intake manifold
1)Brake booster to piston assembly.
1)Brake booster housing inside groove.
1)Brake booster end of piston rod.
Buna O-ring:
1)carb to aircleaner
Price $6 including shipping in the US.
I am not making anything on this.
craft59@...
Lyle

--- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> Everybody is buying single o-rings, we need to get together on this.
> I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :)
> I bought 25-50 Viton O-rings because they are real cheap that way.
> I have all the o-rings for the carb and manifold.
> I also have a few o-rings for the brake booster assembly.
> They fit and are Viton so they will last in our alcohol fuel.
> If anyone wants to buy my extras let me know.
> Lyle

bottom cop · Post by **bottom cop** » Tue Jun 01, 2010 3:09 pm

Execellent idea. That way there would be no confusion. First o-rings, next gaskets, than ???

--- On
Mon, 5/31/10, lyletrudell

wrote:
> From: lyletrudell
> Subject: [2cylinderhondas] Re: O-rings Viton
> To: 2cylinderhondas@yahoogroups.com
> Date: Monday, May 31, 2010, 1:16 PM
> Good idea, if you can get a good close up view of the carb parts and the brake booster. Then we can put it in the database for everyone to see were all the orings go and what size they are.
> Lyle
> --- In
> 2cylinderhondas@yahoogroups.com
> , bottom cop wrote:
> > I'm sure we all appreciate the offer of the O-rings but why not post all of the measurements in one message. That would really be helpful.
> > --- On Sun, 5/30/10, lyletrudell wrote:
> > From: lyletrudell
> > Subject: [2cylinderhondas] Re: O-rings Viton
> > To:
> 2cylinderhondas@yahoogroups.com
> > Date: Sunday, May 30, 2010, 9:39 AM
> > Just email me.
> > I guess I could just put them in an envelope.
> > Have got a lot of good info from the 2 clubs, so just my way of helping out.
> > Craft59@...
> > Lyle
> > --- In
> 2cylinderhondas@yahoogroups.com
> , "lyletrudell" wrote:
> > > Everybody is buying single o-rings, we need to get together on this.
> > > I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :) > > > I bought 25-50 Viton O-rings because they are real cheap that way.
> > > I have all the o-rings for the carb and manifold.
> > I also have a few o-rings for the brake booster assembly.
> > > They fit and are Viton so they will last in our alcohol fuel.
> > > If anyone wants to buy my extras let me know.
> > > Lyle
> > ------------------------------------

Bob Freeman · Post by **Bob Freeman** » Tue Jun 01, 2010 4:23 pm

I am interested in a "kit" of O-rings. Where do I send the money?

--- On
Tue, 6/1/10, lyletrudell

wrote:
> From: lyletrudell
> Subject: [2cylinderhondas] Re: O-rings Viton
> To: 2cylinderhondas@yahoogroups.com
> Date: Tuesday, June 1, 2010, 5:24 PM
> Hi, if anyone is interested in my extra O-rings email me.
> The Viton O-rings I have:
> 1)carb jet small
> 1)carb jet large
> 1)carb air screw
> 1)carb float needle seat
> 1)carb fuel solenoid
> 1)carb to intake manifold
> 1)Brake booster to piston assembly.
> 1)Brake booster housing inside groove.
> 1)Brake booster end of piston rod.
> Buna O-ring:
> 1)carb to aircleaner
> Price $6 including shipping in the US.
> I am not making anything on this.
> craft59@...
> Lyle
> --- In
> 2cylinderhondas@yahoogroups.com
> , "lyletrudell" wrote:
> > Everybody is buying single o-rings, we
> need to get together on this.
> > I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :) > > I bought 25-50 Viton O-rings because they are real cheap that way.
> > I have all the o-rings for the carb and manifold.
> > I also have a few o-rings for the brake booster assembly.
> > They fit and are Viton so they will last in our alcohol fuel.
> > If anyone wants to buy my extras let me know.
> > Lyle

lyletrudell · Post by **lyletrudell** » Tue Jun 01, 2010 4:46 pm

Just Email me, don't want to tie up the message board selling stuff.
craft59@...
Lyle

--- In
2cylinderhondas@yahoogroups.com
, Bob Freeman wrote:
> I am interested in a "kit" of O-rings. Where do I send the money?
> --- On Tue, 6/1/10, lyletrudell wrote:
> From: lyletrudell
> Subject: [2cylinderhondas] Re: O-rings Viton
> To:
2cylinderhondas@yahoogroups.com
> Date: Tuesday, June 1, 2010, 5:24 PM
> Hi, if anyone is interested in my extra O-rings email me.
> The Viton O-rings I have:
> 1)carb jet small
> 1)carb jet large
> 1)carb air screw
> 1)carb float needle seat
> 1)carb fuel solenoid
> 1)carb to intake manifold
> 1)Brake booster to piston assembly.
> 1)Brake booster housing inside groove.
> 1)Brake booster end of piston rod.
> Buna O-ring:
> 1)carb to aircleaner
> Price $6 including shipping in the US.
> I am not making anything on this.
> craft59@...
> Lyle
> --- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> > Everybody is buying single o-rings, we need to get together on this.
> > I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :)
> > I bought 25-50 Viton O-rings because they are real cheap that way.
> > I have all the o-rings for the carb and manifold.
> > I also have a few o-rings for the brake booster assembly.
> > They fit and are Viton so they will last in our alcohol fuel.
> > If anyone wants to buy my extras let me know.
> > Lyle

lyletrudell · Post by **lyletrudell** » Tue Jun 01, 2010 8:05 pm

Dale, brought up that maybe the 72 coupe booster "might" use different O-rings than an early sedan?
So until we figure out if all the O-rings are the same, this carb/booster O-ring kit will be for a 1972 coupe.
I will be sending O-rings to Dale, hopefully he can try them on a sedan for fit.
Want everyone to be happy.
Lyle

--- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> Just Email me, don't want to tie up the message board selling stuff.
> craft59@...
> Lyle
> --- In
2cylinderhondas@yahoogroups.com
, Bob Freeman wrote:
> > I am interested in a "kit" of O-rings. Where do I send the money?
> > --- On Tue, 6/1/10, lyletrudell wrote:
> > From: lyletrudell
> > Subject: [2cylinderhondas] Re: O-rings Viton
> > To:
2cylinderhondas@yahoogroups.com
> > Date: Tuesday, June 1, 2010, 5:24 PM
> > Hi, if anyone is interested in my extra O-rings email me.
> > The Viton O-rings I have:
> > 1)carb jet small
> > 1)carb jet large
> > 1)carb air screw
> > 1)carb float needle seat
> > 1)carb fuel solenoid
> > 1)carb to intake manifold
> > 1)Brake booster to piston assembly.
> > 1)Brake booster housing inside groove.
> > 1)Brake booster end of piston rod.
> > Buna O-ring:
> > 1)carb to aircleaner
> > Price $6 including shipping in the US.
> > I am not making anything on this.
> > craft59@
> > Lyle
> > --- In
2cylinderhondas@yahoogroups.com
, "lyletrudell" wrote:
> > > Everybody is buying single o-rings, we need to get together on this.
> > > I measured all the old o-rings and the o-ring grooves and have all the sizes, being a machinist I like measuring things! :)
> > > I bought 25-50 Viton O-rings because they are real cheap that way.
> > > I have all the o-rings for the carb and manifold.
> > > I also have a few o-rings for the brake booster assembly.
> > > They fit and are Viton so they will last in our alcohol fuel.
> > > If anyone wants to buy my extras let me know.
> > > Lyle