my new website

[mterrens]

I finally got around to starting up a little website dedicated to the 600, which of course will focus on my Coupe!
I will add to the site as I blunder along with tweaking, poking, adjusting and playing around with the car, and will include links to other sites, pictures of my Coupe and other 600's (sedans, too) and whatever other content seems useful or interesting.
For now, I have created a .pdf out of a couple of jpegs that Mike O'Connor sent me - paint codes for the Sedan and Coupe. For some reason this data is generally not "out there", so here it is.
http://www.honda600coupe.com/
If you have any ideas, pictures, documents, etc, that you think could be added to the site, please let me know. I am sure I know less about the mechanicals of the Coupe than a lot of the folks here, so any real wisdom to be found on this new site will definately be a community effort.
Steve

[jpro8071]

There's one that bit me - the o-rings that have to go under the cylinders on some older engines. (I've now got a bag if anyone needs some.) Better off replacing the cylinder if you have the parts, but when you are building an engine from mixed parts and don't know it causes some real headaches and an ugly oil leak.
Does anyone have a good image that Steve could add to his website for this one?

--- In
2cylinderhondas@yahoogroups.com
, Steven Michelsen wrote:
> I finally got around to starting up a little website dedicated to the 600, which of course will focus on my Coupe!
> I will add to the site as I blunder along with tweaking, poking, adjusting and playing around with the car, and will include links to other sites, pictures of my Coupe and other 600's (sedans, too) and whatever other content seems useful or interesting.
> For now, I have created a .pdf out of a couple of jpegs that Mike O'Connor sent me - paint codes for the Sedan and Coupe. For some reason this data is generally not "out there", so here it is.
http://www.honda600coupe.com/
> If you have any ideas, pictures, documents, etc, that you think could be added to the site, please let me know. I am sure I know less about the mechanicals of the Coupe than a lot of the folks here, so any real wisdom to be found on this new site will definately be a community effort.
> Steve