Honda N360

[ICC NET]

Greg ,
Many thanks for the email.
My biggest problem is trying to obtain a exhaust silencer and down pipes from the cylinders head.
I can get a custom one made here but its very expensive and also its
2hours drive from where I am, I will have to drive the car there and probably leave it with them for a few days.
Is there a substitute I can use or you can recommend me wheres the best place to find one or any other alternative option
Regards
Bharat
Sent from my iPhone

[SArya2000]

I fitted a new muffler to my N360 a couple of years ago.  From memory it was from a1974 Honda Civic - the muffler was the same size but the in & out pipes were obviously different, so I cut & welded the old ones on, which were still usable.  I also cut the old mid-mount support bracket from the old and welded it to the new.  I also had new engine pipes made a few years before that.  I gave them the car with the grille removed and they bent up a new pair which are still on the car.  They said it was very fiddly but managed ok.
I have a contact in England who has a couple of N360's in excellent condition.  He may be able to advise you - I'm in Australia.  If you contact me by email I will send you his email address. fredz at mysoul . com . au