Re: My 1972 n 600 turns on by won't stay

Steve · Post by **Steve** » Tue Mar 13, 2018 10:03 am

I sent Ellias off group, March 11, a long list of things to check when he first posted and
where to download the manuals for free.
My suggestions then: First check points gap, set to .015". Make sure you have a good ORing on the carb solenoid. Make sure idle jet in carb is clean. Make sure no vacuum leaks at brake booster or carb manifold. Adjust carb mixture screw 2 turns out. Make sure it's running on 2 cylinders. Float level is too low, make sure bowl is 3/4 full - difficult to do but if careful you can remove the bowl with carb level.
After you do all those things call me if you still need help.
Miles
XXX-XXX-XXXX

Ellias Nassif · Post by **Ellias Nassif** » Tue Mar 13, 2018 4:44 pm

Now we are back to the electrical system the battery wont charge and I will get to it tomorrow I have all the replacement parts except a new stator. I hope its one of the components. The didnt have the original regulator on it I think the guy before me bought it from that 600 store That every one says not to buy from....
Sent from my iPhone

On Mar 13, 2018, at 10:04 AM, 'Miles Chappell'
z600miles@...
[anzhonda600owners] wrote:
I sent Ellias off group, March 11, a long list
of things to check when he first posted and
where to download the manuals for free.
My suggestions then: First check points gap, set
to .015". Make sure you have a good ORing on the carb solenoid. Make sure idle jet in carb is clean. Make sure no vacuum leaks at brake booster or carb manifold. Adjust carb mixture screw 2 turns out. Make sure it's running on 2 cylinders. Float level is too low, make sure bowl is 3/4 full - difficult to do but if careful you can remove the bowl with carb level.
After you do all those things call me if you
still need help.
Miles
XXX-XXX-XXXX

heedo · Post by **heedo** » Tue Mar 13, 2018 5:33 pm

Did u check the rectifier?..could be that
Sent from my Verizon 4G LTE smartphone
-------- Original message --------
From: "Ellias Nassif elliasnassif@... [anzhonda600owners]"
Date: 3/13/18 7:44 PM (GMT-05:00)
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] My 1972 n 600 turns on by won't stay
Now we are back to the electrical system the battery wont charge and I will get to it tomorrow I have all the replacement parts except a new stator. I hope its one of the components. The didnt have the original regulator on it I think the guy before me bought it from that 600 store That every one says not to buy from....
Sent from my iPhone

On Mar 13, 2018, at 10:04 AM, 'Miles Chappell'
z600miles@...
[anzhonda600owners] wrote:
I sent Ellias off group, March 11, a long list
of things to check when he first posted and
where to download the manuals for free.
My suggestions then: First check points gap, set
to .015". Make sure you have a good ORing on the carb solenoid. Make sure idle jet in carb is clean. Make sure no vacuum leaks at brake booster or carb manifold. Adjust carb mixture screw 2 turns out. Make sure it's running on 2 cylinders. Float level is too low, make sure bowl is 3/4 full - difficult to do but if careful you can remove the bowl with carb level.
After you do all those things call me if you
still need help.
Miles
XXX-XXX-XXXX

Bill Cockayne · Post by **Bill Cockayne** » Wed Mar 14, 2018 4:29 am

Could you please inform me which store everyone has problems with? I need to buy thousands of dollars worth of items for my Z600 and do not want to get boned. Thanks.
From:
mailto:anzhonda600owners@yahoogroups.com
Sent:
Tuesday, March 13, 2018 7:44 PM
To:
anzhonda600owners@yahoogroups.com
Subject:
Re: [anzhonda600owners] My 1972 n 600 turns on by won't stay
Now we are back to the electrical system the battery wont charge and I will get to it tomorrow I have all the replacement parts except a new stator. I hope its one of the components. The didnt have the original regulator on it I think the guy before me bought it from that 600 store That every one says not to buy from....
Sent from my iPhone
On Mar 13, 2018, at 10:04 AM, 'Miles Chappell' z600miles@...
[anzhonda600owners] I sent Ellias off group, March 11, a long list
> of things to check when he first posted and
> where to download the manuals for free.
> My suggestions then: First check points gap,
> set to .015". Make sure you have a good ORing on the carb solenoid. Make sure > idle jet in carb is clean. Make sure no vacuum leaks at brake booster or carb > manifold. Adjust carb mixture screw 2 turns out. Make sure it's running on 2 > cylinders. Float level is too low, make sure bowl is 3/4 full - difficult to > do but if careful you can remove the bowl with carb level.
> After you do all those things call me if you
> still need help.
> Miles
> XXX-XXX-XXXX
[/quote]