Honda N or Z600 Roller Crank

[Mark P Hatten]

A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark Portland Or.
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com

[Mark P Hatten]

I have one good used crankshaft remaining if anyone is interested.
A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark Portland Or.
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com

[zinc2u]

Hi Mark,
     I think Toni in Spain is going to need a Honda 600 crank.   And once he tears down the engine,  he will probably find a whole bunch more stuff which he will want to replace once he has gone that deep into the engine.
Dale

> A fellow Honda microcar
> enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller > cranks are hard to find, and very expensive to rebuild. They seem to fail if > the 600 engine is worn or has lack of proper oil changes. I change my oil > every 500 miles. These two are in very good / excellent shape. I have stored > them well in a weather proof tote, I spin the bearings every so often to keep > them moving. Both these Honda 600 microcar cranks are > available.
> https://www.youtube.com/watch?v=1KvHP2q7-YY
> Mark
> Portland
> Or.
> The 2014 National Microcar Show is at
> www.gpnwmme.com
> and is
> sponsored by
> www.mphspecialties.com

[Mark P Hatten]

I have one good used remaining crankshaft available
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com
To: 2cylinderhondas@yahoogroups.com From: 2cylinderhondas@yahoogroups.com Date: Wed, 4 Jun 2014 05:58:21 -0700 Subject: Re: [2cylinderhondas] Honda N or Z600 Roller Crank
Ben, I'm interested in the 360 crank - a month later ( haven't logged on for a while).  Send me a PM with some info.  Thanks