Honda 600 muffler suggestion

[Mark P Hatten]

I found a quality built reasonable priced muffler alternative for your Honda 600 or any other microcar. It's made of all steel, seems very sturdy and thick metal. My part supplier will not let me know where they get them, I think they maybe wholesale RV generator mufflers. For $ 40 bucks or cheaper these double pass glass pack sized mufflers can be had. Put a muffler on your Honda z600 or n600
https://www.youtube.com/watch?v=wwE7fy0Y-DY
Mark Portland Or.
www.mphspecialties.com

[Michael Wasilewski]

Mark and Bill and All,
I am forwarding a photo of a nice patch up job by the previous owner. Also Mark, I don't think your muffler suggestion will work in my case. I would have to have two elbow made to fit my exhaust system. Today I will attempt fiber fixation.
From:
Mark P Hatten
To:
Sent:
Tuesday, September 24, 2013 8:11 AM
Subject:
[anzhonda600owners] Honda 600 muffler suggestion
    I found a quality built reasonable priced muffler alternative for your Honda 600 or any other microcar. It's made of all steel, seems very sturdy and thick metal. My part supplier will not let me know where they get them, I think they maybe wholesale RV generator mufflers. For $ 40 bucks or cheaper these double pass glass pack sized mufflers can be had. Put a muffler on your Honda z600 or n600 https://www.youtube.com/watch?v=wwE7fy0Y-DY   Mark Portland Or.
www.mphspecialties.com

[Eric Geiger]

sherwood garage sells an exact stainless steel reproduction.  its a little pricey but it'll outlast the car most likely.
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Sep 26, 2013, at 6:41 PM, Michael Wasilewski wrote:
> Mark and Bill and All,
> I am forwarding a photo of a nice patch up job by the previous owner. Also Mark, I don't think your muffler suggestion will work in my case. I would have to have two elbow made to fit my exhaust system. Today I will attempt fiber fixation.
> From:
> Mark P Hatten mphatten@...
> To:
> Sent:
> Tuesday, September 24, 2013 8:11 AM
> Subject:
> [anzhonda600owners] Honda 600 muffler suggestion
>     I found a quality built reasonable priced muffler alternative for your Honda 600 or any other microcar. It's made of all steel, seems very sturdy and thick metal. My part supplier will not let me know where they get them, I think > they maybe wholesale RV generator mufflers. For $ 40 bucks or cheaper these double pass glass pack sized mufflers can be had. Put a muffler on your Honda z600 or n600 > https://www.youtube.com/watch?v=wwE7fy0Y-DY >   Mark Portland > Or.
> www.mphspecialties.com

[Michael Wasilewski]

Eric, would you have a web address, thanks
From:
Eric Geiger
To:
""
Sent:
Thursday, September 26, 2013 4:48 PM
Subject:
Re: [anzhonda600owners] Honda 600 muffler suggestion
sherwood garage sells an exact stainless steel reproduction.  its a little pricey but it'll outlast the car most likely.
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
http://www.prgnocturne.com/

On
Sep
26, 2013, at 6:41 PM, Michael Wasilewski wrote:
> Mark and Bill and All,
> I am forwarding a photo of a nice patch up job by the previous owner. Also Mark, I don't think your muffler suggestion will work in my case. I would have to have two elbow made to fit my exhaust system. Today I will attempt fiber fixation.
> From:
> Mark P
> Hatten
> mphatten@...
> To:
> Sent:
> Tuesday, September 24, 2013 8:11 AM
> Subject:
> [anzhonda600owners] Honda 600 muffler suggestion
>     I found a quality built reasonable priced muffler alternative for your Honda 600 or any other > microcar > . It's made of all steel, seems very sturdy and thick metal. My part supplier will not let me know where they get them, I think > they maybe wholesale RV generator mufflers. For $ 40 bucks or cheaper these double pass glass pack sized mufflers can be had. Put a muffler on your Honda z600 or n600 > https://www.youtube.com/watch?v=wwE7fy0Y-DY >   Mark Portland > Or.
> www.mphspecialties.com

[Eric Geiger]

http://www.ebay.com/sch/m.html?_odkw=&_ ... &_from=R40
or
http://www.ebay.com/usr/sherwoodmotorcycles
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
www.prgnocturne.com

On Sep 26, 2013, at 7:05 PM, Michael Wasilewski wrote:
> Eric, would you have a web address, thanks
> From:
> Eric Geiger
> To:
> ""
> Sent:
> Thursday, September 26, 2013 4:48 PM
> Subject:
> Re: [anzhonda600owners] Honda 600 muffler suggestion
> sherwood
> garage sells an exact stainless steel reproduction.  its a little pricey but it'll outlast the car most likely.
> Eric J. Geiger
> PRG
> Nocturne
> XXX-XXX-XXXX
>  phone
> XXX-XXX-XXXX
>  fax
> XXX-XXX-XXXX
>  mobile
> egeiger@...
> http://www.prgnocturne.com/
> On
> Sep
> 26, 2013, at 6:41 PM, Michael Wasilewski wrote:
> > Mark and Bill and All,
> > I am forwarding a photo of a nice patch up job by the previous owner. Also Mark, I don't think your muffler suggestion will work in my case. I would have to have two elbow made to fit my exhaust system. Today I will attempt fiber fixation.
> > From:
> > Mark P
> > Hatten
> > > mphatten@...
> > To:
> > Sent:
> > Tuesday, September 24, 2013 8:11 AM
> > Subject:
> > [anzhonda600owners] Honda 600 muffler suggestion
> >     I found a quality built reasonable priced muffler alternative for your Honda 600 or any other
> > microcar
> > . It's made of all steel, seems very sturdy and thick metal. My part supplier will not let me know where they get them, I think they maybe wholesale RV generator mufflers. For $ 40 bucks or cheaper these double > > pass glass pack sized mufflers can be had. Put a muffler on your Honda z600 or n600 > > https://www.youtube.com/watch?v=wwE7fy0Y-DY > >   Mark Portland Or.
> > www.mphspecialties.com

[Michael Wasilewski]

Wow, you were right about the price, thanks for the link
From:
Eric Geiger
To:
""
Sent:
Thursday, September 26, 2013 5:12 PM
Subject:
Re: [anzhonda600owners] Honda 600 muffler suggestion
http://www.ebay.com/sch/m.html?_odkw=&_ ... &_from=R40
or
http://www.ebay.com/usr/sherwoodmotorcycles
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX  phone
XXX-XXX-XXXX  fax
XXX-XXX-XXXX  mobile
egeiger@...
http://www.prgnocturne.com/

On Sep 26, 2013, at 7:05 PM, Michael Wasilewski wrote:
> Eric, would you have a web address, thanks
> From:
> Eric Geiger
> To:
> ""
> Sent:
> Thursday, September 26, 2013 4:48 PM
> Subject:
> Re: [anzhonda600owners] Honda 600 muffler suggestion
> sherwood
> garage sells an exact stainless steel reproduction.  its a little pricey but it'll outlast the car most likely.
> Eric J. Geiger
> PRG
> Nocturne
> XXX-XXX-XXXX
>  phone
> XXX-XXX-XXXX
>  fax
> XXX-XXX-XXXX
>  mobile
> egeiger@...
> http://www.prgnocturne.com/
> On
> Sep
> 26, 2013, at 6:41 PM, Michael Wasilewski wrote:
> > Mark and Bill and All,
> > I am forwarding a photo of a nice patch up job by the previous owner. Also Mark, I don't think your muffler suggestion will work in my case. I would have to have two elbow made to fit my exhaust system. Today I will attempt fiber fixation.
> > From:
> > Mark P
> > Hatten
> > > mphatten@...
> > To:
> > Sent:
> > Tuesday, September 24, 2013 8:11 AM
> > Subject:
> > [anzhonda600owners] Honda 600 muffler suggestion
> >     I found a quality built reasonable priced muffler alternative for your Honda 600 or any other
> > microcar
> > . It's made of all steel, seems very sturdy and thick metal. My part supplier will not let me know where they get them, I think they maybe wholesale RV generator mufflers. For $ 40 bucks or cheaper these double > > pass glass pack sized mufflers can be had. Put a muffler on your Honda z600 or n600 > > https://www.youtube.com/watch?v=wwE7fy0Y-DY > >   Mark Portland Or.
> > www.mphspecialties.com