Re: [2cylinderhondas] Parting out.

friend · Post by **friend** » Sun Oct 12, 2008 10:21 pm

All;
Take a look at the article on fuels and where they are going (70+%) Alcohol in our fuels. Not far away. And the rubber in our carbs will not be able to handle the alcohol. I am looking for a manufacturer that is making O rings out of Viton rubber. Viton will work well with any amount of alcohol in the fuel mix.
http://www.UberDriveMag.com/Uber1008/
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Don Foco > Sent:
> Sunday, October 12, 2008 3:46
> AM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] Parting out.
> any carbs?
> --- On
> Sat, 10/11/08, Nickle Axe
>
> wrote:
> > From: Nickle
> > Axe
> > Subject: [2cylinderhondas]
> > Parting out.
> > To: 2cylinderhondas@ yahoogroups. com
> > Date:
> > Saturday, October 11, 2008, 10:30 PM
> > I'm parting out my two Zs, since there is no interest in anyone > > buying them. I've got all the glass, most of the interior parts, and > > almost everything else. Let me know if you need > > anything.

JN · Post by JN » Mon Oct 13, 2008 8:01 am

Would any additive help this problem?

--- On
Sun, 10/12/08, billmyong@...

wrote:
> From: billmyong@...
> Subject: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
> To: "Anzhonda600owners" , 2cylinderhondas@yahoogroups.com > Date: Sunday, October 12, 2008, 10:19 PM
> All;
> Take a look at the article on fuels
> and where they are going (70+%) Alcohol in our fuels. Not far > away. And the rubber in our carbs will not be able to handle the > alcohol. I am looking for a manufacturer that is making O rings out of > Viton rubber. Viton will work well with any amount of alcohol in the > fuel mix.
> http://www.UberDriv eMag.com/ Uber1008/
> Bill
> > -----Original Message-----
> > From:
> > 2cylinderhondas@ yahoogroups. com [mailto:2cylinderho ndas@yahoogroups .com] > > On > > Behalf Of > > Don Foco > > Sent:
> > Sunday, October 12, 2008 3:46
> > AM
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Subject:
> > Re:
> > [2cylinderhondas] Parting out.
> > any carbs?
> > --- On
> > Sat, 10/11/08, Nickle Axe
> >
> > wrote:
> > > From: Nickle
> > > Axe
> > > Subject: [2cylinderhondas]
> > > Parting out.
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date:
> > > Saturday, October 11, 2008, 10:30 PM
> > > I'm parting out my two Zs, since there is no interest in anyone > > > buying them. I've got all the glass, most of the interior parts, and > > > almost everything else. Let me know if you need > > > anything.

David Dave · Post by **David Dave** » Mon Oct 13, 2008 11:18 am

Hi Bill,
If you can get me sizes. I Deal with a few company's that do any
material for o rings.
Dave

--- In
anzhonda600owners@yahoogroups.com
, wrote:
> All;
> Take a look at the article on fuels and where they are going
(70+%)
> Alcohol in our fuels. Not far away. And the rubber in our carbs
will not
> be able to handle the alcohol. I am looking for a manufacturer
that is
> making O rings out of Viton rubber. Viton will work well with any
amount of
> alcohol in the fuel mix.
http://www.UberDriveMag.com/Uber1008/
> Bill
> -----Original Message-----
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Don Foco
> Sent: Sunday, October 12, 2008 3:46 AM
> To:
2cylinderhondas@yahoogroups.com
> Subject: Re: [2cylinderhondas] Parting out.
> any carbs?
> --- On Sat, 10/11/08, Nickle Axe wrote:
> From: Nickle Axe
> Subject: [2cylinderhondas] Parting out.
> To:
2cylinderhondas@yahoogroups.com
> Date: Saturday, October 11, 2008, 10:30 PM
> I'm parting out my two Zs, since there is no interest in
anyone
> buying them. I've got all the glass, most of the interior parts,
and almost
> everything else. Let me know if you need anything.

friend · Post by **friend** » Mon Oct 13, 2008 11:53 pm

JN:
Nothing will change the effects. I am making up some accelerator pump diaphragm's out of a material that is supposed to take the fuel mixes. Still in test stage. Want to make sure they are not going to leak.
Bill

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> JN
> Sent:
> Monday, October 13, 2008 8:02 AM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> Re: [anzhonda600owners]
> RE: [2cylinderhondas] Parting out.
> Would any additive help this problem?
> --- On
> Sun, 10/12/08, billmyong@earthlink .net
>
> wrote:
> > From:
> > billmyong@earthlink .net
> >
> > Subject: [anzhonda600owners]
> > RE: [2cylinderhondas] Parting out.
> > To: "Anzhonda600owners"
> > ,
> > 2cylinderhondas@ yahoogroups. com
> > Date: Sunday, October 12,
> > 2008, 10:19 PM
> > All;
> > Take a look at the article
> > on fuels and where they are going (70+%) Alcohol in our fuels.
> > Not far away. And the rubber in our carbs will not be able > > to handle the alcohol. I am looking for a manufacturer that is > > making O rings out of Viton rubber. Viton will work well with > > any amount of alcohol in the fuel mix.
> > http://www.UberDriv eMag.com/ Uber1008/
> > Bill
> > > -----Original Message-----
> > > From:
> > > 2cylinderhondas@
> > > yahoogroups. com [mailto:2cylinderho ndas@yahoogroups .com] > > > On > > > Behalf Of > > > Don Foco > > > Sent:
> > > Sunday, October 12, 2008 3:46
> > > AM
> > > To:
> > > 2cylinderhondas@ yahoogroups.
> > > com
> > > Subject:
> > > Re: [2cylinderhondas] Parting
> > > out.
> > > any carbs?
> > > --- On
> > > Sat, 10/11/08,
> > > Nickle Axe
> > >
> > > wrote:
> > > > From: Nickle
> > > > Axe
> > > > Subject:
> > > > [2cylinderhondas] Parting out.
> > > > To: 2cylinderhondas@
> > > > yahoogroups. com
> > > > Date: Saturday, October 11, 2008, 10:30
> > > > PM
> > > > I'm parting out my two Zs, since there is no interest > > > > in anyone buying them. I've got all the glass, most of the > > > > interior parts, and almost everything else. Let me > > > > know if you need > > > > anything.

jennings93463 · Post by **jennings93463** » Tue Oct 14, 2008 12:05 pm

--- In anzhonda600owners@yahoogroups.com, "David/Dave"
wrote:

> Hi Bill,
> If you can get me sizes. I Deal with a few company's that do any
> material for o rings.
> Dave
> --- In
anzhonda600owners@yahoogroups.com
, wrote:
> > All;
> > Take a look at the article on fuels and where they are going
> (70+%)
> > Alcohol in our fuels. Not far away. And the rubber in our carbs
> will not
> > be able to handle the alcohol. I am looking for a manufacturer
> that is
> > making O rings out of Viton rubber. Viton will work well with any
> amount of
> > alcohol in the fuel mix.
http://www.UberDriveMag.com/Uber1008/
> > Bill
> > -----Original Message-----
> > From:
2cylinderhondas@yahoogroups.com
> > [mailto:
2cylinderhondas@yahoogroups.com
]On Behalf Of Don Foco
> > Sent: Sunday, October 12, 2008 3:46 AM
> > To:
2cylinderhondas@yahoogroups.com
> > Subject: Re: [2cylinderhondas] Parting out.
> > any carbs?
> > --- On Sat, 10/11/08, Nickle Axe wrote:
> > From: Nickle Axe
> > Subject: [2cylinderhondas] Parting out.
> > To:
2cylinderhondas@yahoogroups.com
> > Date: Saturday, October 11, 2008, 10:30 PM
> > I'm parting out my two Zs, since there is no interest in
> anyone
> > buying them. I've got all the glass, most of the interior parts,
> and almost
> > everything else. Let me know if you need anything.

do you have a console?

Robert Goodrich · Post by **Robert Goodrich** » Tue Oct 14, 2008 8:07 pm

I need a motor! How much?

--- On
Tue, 10/14/08, billmyong@...

wrote:
From: billmyong@...
Subject: RE: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
To: anzhonda600owners@yahoogroups.com
Date: Tuesday, October 14, 2008, 1:52 AM
JN:
Nothing will change the effects. I am making up some accelerator pump diaphragm's out of a material that is supposed to take the fuel mixes. Still in test stage. Want to make sure they are not going to leak.
Bill
> -----Original Message-----
> From:
> anzhonda600owners@ yahoogroups. com [mailto:anzhonda600 owners@yahoogrou ps.com] > On Behalf Of > JN > Sent:
> Monday, October 13, 2008 8:02 AM
> To:
> anzhonda600owners@ yahoogroups. com
> Subject:
> Re: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
> Would any additive help this problem?
> --- On
> Sun, 10/12/08, billmyong@earthlink .net
>
> wrote:
> > From: billmyong@earthlink .net > > Subject: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
> > To: "Anzhonda600owners" , 2cylinderhondas@ yahoogroups. com > > Date: Sunday, October 12, 2008, 10:19 PM
> > All;
> > Take a look at the article on fuels and where they are going (70+%) Alcohol in our fuels. Not far away. And the rubber in our carbs will not be able to handle the alcohol. I am looking for a manufacturer that is making O rings out of Viton rubber. Viton will work well with any amount of alcohol in the fuel mix.
> > http://www.UberDriv eMag.com/ Uber1008/
> > Bill
> > > -----Original Message-----
> > > From:
> > > 2cylinderhondas@ yahoogroups. com [mailto:2cylinderho ndas@yahoogroups .com] > > > On Behalf Of > > > Don Foco > > > Sent:
> > > Sunday, October 12, 2008 3:46 AM
> > > To:
> > > 2cylinderhondas@ yahoogroups. com
> > > Subject:
> > > Re: [2cylinderhondas] Parting out.
> > > any carbs?
> > > --- On
> > > Sat, 10/11/08, Nickle Axe
> > >
> > > wrote:
> > > > From: Nickle Axe
> > > > Subject: [2cylinderhondas] Parting out.
> > > > To: 2cylinderhondas@ yahoogroups. com
> > > > Date: Saturday, October 11, 2008, 10:30 PM
> > > > I'm parting out my two Zs, since there is no interest in anyone buying them. I've got all the glass, most of the interior parts, and almost everything else. Let me know if you need anything.

jennings93463 · Post by **jennings93463** » Wed Oct 22, 2008 1:59 am

--- In anzhonda600owners@yahoogroups.com, Robert Goodrich
wrote:

> I need a motor!� How much?
> --- On Tue, 10/14/08, billmyong@... wrote:
> From: billmyong@...
> Subject: RE: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
> To:
anzhonda600owners@yahoogroups.com
> Date: Tuesday, October 14, 2008, 1:52 AM
> JN:
> �� Nothing will change the effects.� I am making up some

accelerator pump diaphragm's out of a material that is supposed to
take the fuel mixes.� Still in test stage.� Want to make sure they are
not going to leak.

> �
> Bill
> �
> �
> -----Original Message-----
> From: anzhonda600owners@ yahoogroups. com [mailto:anzhonda600

owners@yahoogrou ps.com]On Behalf Of JN

> Sent: Monday, October 13, 2008 8:02 AM
> To: anzhonda600owners@ yahoogroups. com
> Subject: Re: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
> Would any additive help this problem?
> --- On Sun, 10/12/08, billmyong@earthlink .net wrote:
> From: billmyong@earthlink .net
> Subject: [anzhonda600owners] RE: [2cylinderhondas] Parting out.
> To: "Anzhonda600owners" ,

2cylinderhondas@ yahoogroups. com

> Date: Sunday, October 12, 2008, 10:19 PM
> All;
> �� Take a look at the article on fuels and where they are going

(70+%) Alcohol in our fuels.� Not far away.�� And the rubber in our
carbs will not be able to handle the alcohol.� I am looking for a
manufacturer that is making O rings out of Viton rubber.� Viton will
work well with any amount of alcohol in the fuel�mix.

> �
http://www.UberDriv
eMag.com/ Uber1008/
> �
> �
> Bill
> �
> �
> -----Original Message-----
> From: 2cylinderhondas@ yahoogroups. com [mailto:2cylinderho

ndas@yahoogroups .com]On Behalf Of Don Foco

> Sent: Sunday, October 12, 2008 3:46 AM
> To: 2cylinderhondas@ yahoogroups. com
> Subject: Re: [2cylinderhondas] Parting out.
> any carbs?
> --- On Sat, 10/11/08, Nickle Axe wrote:
> From: Nickle Axe
> Subject: [2cylinderhondas] Parting out.
> To: 2cylinderhondas@ yahoogroups. com
> Date: Saturday, October 11, 2008, 10:30 PM
> I'm parting out my two Zs, since there is no interest in anyone

buying them. I've got all the glass, most of the interior parts, and
almost everything else.� Let me know if you need anything.

> From Robert Jennings

Email ( jennings93463@... )
Do you have a console?
Please email me. Thank You!