Nothing at all

[danconklin6]

My son left his lights on in his Z600, two days later his battery was
dead. He got a jump and drove off. He made it to the first stop sign
and the car died. He tried to push start it but had the key turned off
so that didn't work. lol. He then got another jump but reversed the
polarity. Now he has nothing, "nothing at all". The battery has been
completely charged up and he still has nothing. So what do I have to
buy, get, or fix? If it is complicated could you please send a pic
too. Thanks in advance for your help.
Dan

[zinc2u]

Have you checked the primary fuse?  It is a 45 amp fusible link and can be found by following your positive battery cable.  One section of the cable goes to the starter solenoid and the other section of the cable goes to the primary fuse.
What do you mean by "nothing at all"?
  Can you measure voltage at the battery?
  Can you measure voltage at the solenoid?
  Can you measure voltage at the cigarette lighter?
  Do the lights turn on?
It isn't difficult to resolve your problem but I need more detail.
good luck with the troubleshooting,
Dale

> My son
> left his lights on in his Z600, two days later his battery was > dead. He > got a jump and drove off. He made it to the first stop sign > and the car > died. He tried to push start it but had the key turned off > so that didn't > work. lol. He then got another jump but reversed the > polarity. Now he has > nothing, "nothing at all". The battery has been > completely charged up and > he still has nothing. So what do I have to > buy, get, or fix? If it is > complicated could you please send a pic > too. Thanks in advance for your > help.