Re: [2cylinderhondas] HELP!!!

Archived posts from the ANZ Honda 600 Owners Yahoo Group
Post Reply
friend
Posts: 0
Joined: Fri Sep 14, 2012 10:54 pm

Re: [2cylinderhondas] HELP!!!

Post by friend »

Message
Hi Richard.
    The NAPA stores in the cities of California are coded to keep non EPA and CARB approved automotive stuff out of the in-city stores.  And there are a number of states that are that way.  Check the off road shops and/or take a trip to the country.  I had to go to Las Vagas to pickup some for my Vette.   The difference between carbon core wires and copper or other wire is so small you wont feel the difference.
Bill in San Diego
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Richard Morris > Sent:
> Sunday, June 04, 2006 6:56
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> RE:
> [2cylinderhondas] HELP!!!
> NAPA
> sells it by the foot. I just walked in and asked for it as well as the > straight boots and plug connectors. I soldered the sparkplug connectors to the > wire and then slipped the boots over that. Total cost was less than 15 bucks.
> The 8mm wires will screw directly onto the screw posts in the coil.
> Matt
> is right, most of the Honda dealers still carry the oil filters. Mine even had > the air filter...
> Richard
> Morris
> > -----Original Message-----
> > From:
> > 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com]
> > On Behalf Of
> > Bill
> > Sent:
> > Sunday, June 04, 2006 7:21
> > PM
> > To:
> > 2cylinderhondas@yahoogroups.com
> > Subject:
> > [2cylinderhondas] HELP!!!
> > I have my Jegs catalog, went
> > to my local speed shop. my local auto
> > parts store, and no one has 8mm
> > solid core spark plug wire.  Does
> > anyone have a few extra feet they
> > would sell me?  Also, went to my
> > local Honda dealer for an oil
> > filter, points, plugs, etc..  Looked at
> > me like I was crazy and sent
> > me on my way.  Is there a dealer with a
> > website that anyone has had
> > good luck with?  The couple sites that I
> > have been on have like
> > every part made listed but when you call them
> > they say the part is no
> > longer available!!!  My z600 is sitting in the
> > garage just waiting
> > to roar to life.  Thanks,
> > Bill in Missouri
Post Reply