Coupe roof molding

[obleck1]

Coupe owners, we are considering reproducing some of the rubber roof molding that apparently is nowhere to be found anymore (if anyone has a source, please let me know). This is not an inexpensive undertaking, and it might come in around $$100-$200/set, but if there's enough interest we can make it happen. Shoot me a note if you are interested, at honda600carparts@...
Honda600CarParts.com

[Chuck Dean]

That moulding is available from Civic Garage.
https://civicgarage.com/roof-weatherstr ... p-287.html

On Jul 17, 2018, at 7:12 AM,
obleck@...
[2cylinderhondas] wrote:
Coupe owners, we are considering reproducing some of the rubber roof molding that apparently is nowhere to be found anymore (if anyone has a source, please let me know). This is not an inexpensive undertaking, and it might come in around $$100-$200/set, but if there's enough interest we can make it happen. Shoot me a note if you are interested, at honda600carparts@...
Honda600CarParts.com

[Chuck Dean]

I installed as it came from Civic GarageL Chuck� Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe � � � � Our 1961 Vespa 400

On Tue, Jul 17, 2018 at 8:15 AM, Chuck Dean
�That moulding is available from Civic Garage.�
> �
> �
> https://civicgarage.com/roof- weatherstrip-c-90_92/roof-weat herstrip-trim-24m-second-p- 287.html > On Jul 17, 2018, at 7:12 AM, > obleck@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups.c om
> > wrote:
> > �
> > Coupe owners, we are considering reproducing some of the rubber roof molding that apparently is nowhere to be found anymore (if anyone has a source, please let me know). This is not an inexpensive undertaking, and it might come in around $$100-$200/set, but if there's enough interest we can make it happen. Shoot me a note if you are interested, at > > honda600carparts@...
> > Honda600CarParts.com

Note: 1 image(s) originally linked in this post are no longer available (cid:ii_jjpuu5td0_164a8dd546e32904).

[Bill]

Chuck;  The site says it is not available.
 Have you or others asked if they are making them again?
Bill

Note: 1 image(s) originally linked in this post are no longer available (cid:image001.jpg@01D41DAE.7B1A6770).

[Chuck Dean]

Oops, my bad, I just sent the link.
 No, I haven't had any contact with Civic Garage since I bought my roof stripes in January 2017.
 It may be a good idea to contact Civic Garage, he sold these for $66. Perhaps he would know a less expensive manufacturer.
 Chuck

On Jul 17, 2018, at 9:13 AM, 'Bill'
billmyong@...
[2cylinderhondas] wrote:
Chuck;  The site says it is not available.
Have you or others asked if they are making them again?
Bill
From:
2cylinderhondas@yahoogroups.com
[mailto:
2cylinderhondas@yahoogroups.com
]
Sent:
Tuesday, July 17, 2018 8:31
AM
To:
Honda 600 group
Subject:
Re: [2cylinderhondas]
Coupe roof molding
I installed as it
came from Civic GarageL

Chuck
Pleez x cuze enny tie ping or spelin air ores..
Our 1972
Honda 600 Coupe
Our 1961 Vespa 400
On Tue, Jul 17, 2018 at 8:15 AM, Chuck Dean wrote:
> Coupe owners, we are considering
> reproducing some of the rubber roof molding that apparently is nowhere to be > found anymore (if anyone has a source, please let me know). This is not an > inexpensive undertaking, and it might come in around $$100-$200/set, but if > there's enough interest we can make it happen. Shoot me a note if you are > interested, at > honda600carparts@...
> Honda600CarParts.com

Note: 1 image(s) originally linked in this post are no longer available (cid:%20).