Shifter Knob

[tloch220]

Hi,
I have been working on my Z600 Coupe and it did not come with a shifter knob.
I know it might be a bit of sacrilege for the purists, but I found that a 1952 - 1960 VW Beetle has the same thread count and shift pattern as the 1972 Z600.  And proportionally it is the right size (the generic shift knob I got from AutoZone was gigantic and made shifting into reverse very difficult).
Not perfectly accurate, but solved my issue (and it looks kinda cool in ivory with a black shift pattern engraved into it).
My best regards,
Thomas

[Eric Geiger]

Bill Colford makes reproduction ones.
------------------------------------------
Eric Geiger
PRG-Nocturne
XXX-XXX-XXXX
Egeiger@...

On Dec 9, 2016, at 3:51 PM,
tloch220@...
[2cylinderhondas] wrote:
Hi,
I have been working on my Z600 Coupe and it did not come with a shifter knob.
I know it might be a bit of sacrilege for the purists, but I found that a 1952 - 1960 VW Beetle has the same thread count and shift pattern as the 1972 Z600.  And proportionally it is the right size (the generic shift knob I got from AutoZone was gigantic and made shifting into reverse very difficult).
Not perfectly accurate, but solved my issue (and it looks kinda cool in ivory with a black shift pattern engraved into it).
My best regards,
Thomas

[Bill]

Yes, for Coupe, Sedan and in other colors including Skulls, Burrell wood and carbon fiber look.  Please see attached.
Bill

[Chuck Dean]

Hi Bill, do you reproduce the roof stripes for the 600 Coupe?
Chuck� Pleez x cuze enny tie ping or spelin air ores.

On Fri, Dec 9, 2016 at 4:25 PM, 'Bill'
billmyong@...
[2cylinderhondas]
�
> [
> Attachment(s)
> from Bill included below]
> Yes, for Coupe,
> Sedan
> and in other colors including Skulls, Burrell
> wood and carbon fiber look.� Please see attached.
> Bill
> �
> From:
> 2cylinderhondas@yahoogroups. com
> [mailto:
> 2cylinderhondas@ yahoogroups.com
> ]
> Sent:
> Friday, December 09, 2016
> 2:00 PM
> To:
> 2cylinderhondas@yahoogroups. com
> Subject:
> Re: [2cylinderhondas]
> Shifter Knob
> �
> �
> Bill Colford makes reproduction ones.�
> ------------------------------ ------------
> �
> Eric Geiger
> PRG-Nocturne
> XXX-XXX-XXXX
> Egeiger@...
> On Dec 9, 2016, at 3:51 PM,
> tloch220@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups. com
> wrote:
> > �
> > Hi,
> > �
> > I have
> > been working on my Z600 Coupe and it did not come with a shifter knob.�
> > �
> > I know it
> > might be a bit of sacrilege for the purists, but I found that a 1952 - 1960 VW > > Beetle has the same thread count and shift pattern as the 1972 Z600.� And > > proportionally it is the right size (the�generic�shift knob I got > > from AutoZone was�gigantic and made shifting into reverse very difficult).
> > �
> > Not
> > perfectly accurate, but solved my issue (and it looks kinda cool in ivory with > > a black shift pattern engraved into it).
> > �
> > My best
> > regards,
> > Thomas��

[rstevens19]

I managed to obtain a very good reproduction roof extrusion from Civic Garage in Australia. Total cost w/shipping was about $80 (US) for enough for both sides and took about 3 weeks to get.  Make sure you get the Coupe strip material as they also have Civic material. Hope this helps.
Richard
From:
Chuck Dean cadean329@...
[2cylinderhondas]
Sent:
Friday, December 09, 2016 7:59 PM
To:
Honda 600 group
Subject:
Re: [2cylinderhondas] Shifter Knob
Hi Bill, do you reproduce the roof stripes for the 600 Coupe?
Chuck Pleez x cuze enny tie ping or spelin air ores.
On Fri, Dec 9, 2016 at 4:25 PM, 'Bill'
billmyong@...
[2cylinderhondas] [
> Attachment(s)
> from Bill included
> below]
> Yes, for Coupe,
> Sedan
> and in other colors including Skulls,
> Burrell wood and carbon fiber look.  Please see attached.
> Bill
> From:
> 2cylinderhondas@yahoogroups. com
> [mailto:
> 2cylinderhondas@ yahoogroups.com
> ]
> Sent:
> Friday, December 09, 2016 2:00
> PM
> To:
> 2cylinderhondas@yahoogroups. com
> Subject:
> Re: [2cylinderhondas] Shifter
> Knob
> Bill Colford makes reproduction ones.
> ------------------------------ ------------
> Eric Geiger
> PRG-Nocturne
> XXX-XXX-XXXX
> Egeiger@...
> On Dec 9, 2016, at
> 3:51 PM,
> tloch220@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups. com
> wrote:
> > Hi,
> > I have
> > been working on my Z600 Coupe and it did not come with a shifter knob.
> > I know
> > it might be a bit of sacrilege for the purists, but I found that a 1952 - > > 1960 VW Beetle has the same thread count and shift pattern as the 1972 > > Z600.  And proportionally it is the right size (the generic shift knob > > I got from AutoZone was gigantic and made shifting into reverse very > > difficult).
> > Not
> > perfectly accurate, but solved my issue (and it looks kinda cool in ivory > > with a black shift pattern engraved into > > it).
> > My best
> > regards,
> > Thomas
[/quote]
This email has been checked for viruses by Avast antivirus software.
www.avast.com

Note: 1 image(s) originally linked in this post are no longer available (ec).

[Chuck Dean]

Do they have the chrome strip down the center?
Do you have photos?
Thanks, Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores.

On Dec 15, 2016, at 12:47 PM,
rstevens19@...
[2cylinderhondas] wrote:
I managed to obtain a very good reproduction roof extrusion from Civic Garage in Australia. Total cost w/shipping was about $80 (US) for enough for both sides and took about 3 weeks to get.  Make sure you get the Coupe strip material as they also have Civic material. Hope this helps.
Richard
From:
Chuck Dean cadean329@...
[2cylinderhondas]
Sent:
Friday, December 09, 2016 7:59 PM
To:
Honda 600 group
Subject:
Re: [2cylinderhondas] Shifter Knob
Hi Bill, do you reproduce
the roof stripes for the 600 Coupe?
Chuck
Pleez x cuze enny tie ping or spelin air ores.
On Fri, Dec 9, 2016 at 4:25 PM, 'Bill'
billmyong@...
[2cylinderhondas]
[
> Attachment(s)
> from Bill included
> below]
> Yes, for Coupe,
> Sedan
> and in other colors including Skulls,
> Burrell wood and carbon fiber look.  Please see attached.
> Bill
> From:
> 2cylinderhondas@yahoogroups. com
> [mailto:
> 2cylinderhondas@ yahoogroups.com
> ]
> Sent:
> Friday, December 09, 2016 2:00
> PM
> To:
> 2cylinderhondas@yahoogroups. com
> Subject:
> Re: [2cylinderhondas] Shifter
> Knob
> Bill Colford makes reproduction ones.
> ------------------------------ ------------
> Eric Geiger
> PRG-Nocturne
> XXX-XXX-XXXX
> Egeiger@...
> On Dec 9, 2016, at
> 3:51 PM,
> tloch220@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups. com
> wrote:
> > Hi,
> > I have
> > been working on my Z600 Coupe and it did not come with a shifter knob.
> > I know
> > it might be a bit of sacrilege for the purists, but I found that a 1952 - > > 1960 VW Beetle has the same thread count and shift pattern as the 1972 > > Z600.  And proportionally it is the right size (the generic shift knob > > I got from AutoZone was gigantic and made shifting into reverse very > > difficult).
> > Not
> > perfectly accurate, but solved my issue (and it looks kinda cool in ivory > > with a black shift pattern engraved into > > it).
> > My best
> > regards,
> > Thomas
This email has been checked for viruses by Avast antivirus software.
www.avast.com

Note: 2 image(s) originally linked in this post are no longer available (cid:, ec).

[rstevens19]

Chuck, see photo above and link below. Adrian seems to be a very good guy to deal with and knows his stuff! Dont forget to change prices to $US.
Richard
http://civicgarage.com/197072-c-23_25_4 ... m-p-9.html
From:
Chuck Dean cadean329@...
[2cylinderhondas]
Sent:
Thursday, December 15, 2016 3:27 PM
To:
2cylinderhondas@yahoogroups.com
Subject:
Re: [2cylinderhondas] Shifter Knob/Roof Strips
Do they have the chrome strip down the center?
Do you have photos?
Thanks,
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
On Dec 15, 2016, at 12:47 PM, rstevens19@...
[2cylinderhondas] I managed to obtain a very good reproduction roof extrusion from Civic > Garage in Australia. Total cost w/shipping was about $80 (US) for enough for > both sides and took about 3 weeks to get.  Make sure you get the Coupe > strip material as they also have Civic material. Hope this helps.
> Richard
> From:
> Chuck Dean
> cadean329@... [2cylinderhondas]
> Sent:
> Friday, December 09, 2016 7:59 PM
> To:
> Honda 600 group
> Subject:
> Re: [2cylinderhondas] Shifter Knob
> Hi Bill, do you
> reproduce the roof stripes for the 600 Coupe?
> Chuck
> Pleez x cuze enny tie ping or spelin air ores.
> On Fri, Dec 9, 2016 at 4:25 PM, 'Bill'
> billmyong@...
> [2cylinderhondas]
> 2cylinderhondas@yahoogroups.com
> wrote:
> > [
> > Attachment(s)
> > from Bill included
> > below]
> > Yes, for Coupe,
> > Sedan
> > and in other colors including Skulls,
> > Burrell wood and carbon fiber look.  Please see attached.
> > Bill
> > From:
> > 2cylinderhondas@yahoogroups. com
> > [mailto:
> > 2cylinderhondas@ yahoogroups.com
> > ]
> > Sent:
> > Friday, December 09, 2016 2:00
> > PM
> > To:
> > 2cylinderhondas@yahoogroups. com
> > Subject:
> > Re: [2cylinderhondas] Shifter
> > Knob
> > Bill Colford makes reproduction ones.
> > ------------------------------ ------------
> > Eric Geiger
> > PRG-Nocturne
> > XXX-XXX-XXXX
> > Egeiger@...
> > On Dec 9, 2016, at 3:51 PM,
> > tloch220@...
> > [2cylinderhondas] > 2cylinderhondas@yahoogroups. com
> > wrote:
> > > Hi,
> > > I
> > > have been working on my Z600 Coupe and it did not come with a shifter > > > knob.
> > > I
> > > know it might be a bit of sacrilege for the purists, but I found that a > > > 1952 - 1960 VW Beetle has the same thread count and shift pattern as the > > > 1972 Z600.  And proportionally it is the right size (the generic > > > shift knob I got from AutoZone was gigantic and made shifting into reverse > > > very difficult).
> > > Not
> > > perfectly accurate, but solved my issue (and it looks kinda cool in ivory > > > with a black shift pattern engraved into > > > it).
> > > My
> > > best regards,
> > > Thomas
> This
> email has been checked for viruses by Avast antivirus software.
> www.avast.com
[/quote]
This email has been checked for viruses by Avast antivirus software.
www.avast.com

Note: 3 image(s) originally linked in this post are no longer available (ec, ec, ec).

[Chuck Dean]

Thanks, looks perfect!
I changed to USD... Its $18.00 less!
Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores.

On Dec 15, 2016, at 2:47 PM,
rstevens19@...
[2cylinderhondas] wrote:
Chuck, see photo above and link below. Adrian seems to be a very good guy to deal with and knows his stuff! Dont forget to change prices to $US.
Richard
http://civicgarage.com/197072-c-23_25_4 ... m-p-9.html
From:
Chuck Dean cadean329@...
[2cylinderhondas]
Sent:
Thursday, December 15, 2016 3:27 PM
To:
2cylinderhondas@yahoogroups.com
Subject:
Re: [2cylinderhondas] Shifter Knob/Roof
Strips
Do they have the chrome strip down the center?
Do you have photos?
Thanks,
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
On Dec 15, 2016, at 12:47 PM,
rstevens19@...
[2cylinderhondas] I managed to obtain a very good reproduction roof extrusion from Civic > Garage in Australia. Total cost w/shipping was about $80 (US) for enough for > both sides and took about 3 weeks to get.  Make sure you get the Coupe > strip material as they also have Civic material. Hope this helps.
> Richard
> From:
> Chuck Dean
> cadean329@... [2cylinderhondas]
> Sent:
> Friday, December 09, 2016 7:59 PM
> To:
> Honda 600 group
> Subject:
> Re: [2cylinderhondas] Shifter Knob
> Hi Bill, do you
> reproduce the roof stripes for the 600 Coupe?
> Chuck
> Pleez x cuze enny tie ping or spelin air ores.
> On Fri, Dec 9, 2016 at 4:25 PM, 'Bill'
> billmyong@...
> [2cylinderhondas]
> 2cylinderhondas@yahoogroups.com
> wrote:
> > [
> > Attachment(s)
> > from Bill included
> > below]
> > Yes, for Coupe,
> > Sedan
> > and in other colors including Skulls,
> > Burrell wood and carbon fiber look.  Please see attached.
> > Bill
> > From:
> > 2cylinderhondas@yahoogroups. com
> > [mailto:
> > 2cylinderhondas@ yahoogroups.com
> > ]
> > Sent:
> > Friday, December 09, 2016 2:00
> > PM
> > To:
> > 2cylinderhondas@yahoogroups. com
> > Subject:
> > Re: [2cylinderhondas] Shifter
> > Knob
> > Bill Colford makes reproduction ones.
> > ------------------------------ ------------
> > Eric Geiger
> > PRG-Nocturne
> > XXX-XXX-XXXX
> > Egeiger@...
> > On Dec 9, 2016, at 3:51 PM,
> > tloch220@...
> > [2cylinderhondas] > 2cylinderhondas@yahoogroups. com
> > wrote:
> > > Hi,
> > > I
> > > have been working on my Z600 Coupe and it did not come with a shifter > > > knob.
> > > I
> > > know it might be a bit of sacrilege for the purists, but I found that a > > > 1952 - 1960 VW Beetle has the same thread count and shift pattern as the > > > 1972 Z600.  And proportionally it is the right size (the generic > > > shift knob I got from AutoZone was gigantic and made shifting into reverse > > > very difficult).
> > > Not
> > > perfectly accurate, but solved my issue (and it looks kinda cool in ivory > > > with a black shift pattern engraved into > > > it).
> > > My
> > > best regards,
> > > Thomas
> This
> email has been checked for viruses by Avast antivirus software.
> www.avast.com
This email has been checked for viruses by Avast antivirus software.
www.avast.com

Note: 4 image(s) originally linked in this post are no longer available (ec, cid:(null), ec +1 more).

[Chuck Dean]

Hi Richard,� Thanks for the tip on the roof stripes. Cibic Garage delivered them in three weeks, and they look great!.
Chuck� Pleez x cuze enny tie ping or spelin air ores.

On Thu, Dec 15, 2016 at 2:47 PM,
rstevens19@...
[2cylinderhondas]
�
> �
> Chuck, see photo above and link below. Adrian seems to be a very good guy > to deal with and knows his stuff! Dont forget to change prices to $US.
> �
> Richard
> �
> http://civicgarage.com/197072- c-23_25_49_50_51/roof-weathers trip-trim-24m-p-9.html
> �
> �
> From:
> Chuck Dean cadean329@...
> [2cylinderhondas]
> Sent:
> Thursday, December 15, 2016 3:27 PM
> To:
> 2cylinderhondas@... m
> Subject:
> Re: [2cylinderhondas] Shifter Knob/Roof
> Strips
> �
> �
> Do they have the chrome strip down the center?
> Do you have photos?
> Thanks,
> �
> Chuck (mobile)
> Pleez x cuze enny tie ping or spelin air ores.
> On Dec 15, 2016, at 12:47 PM,
> rstevens19@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups.c om
> wrote:
> > �
> > I managed to obtain a very good reproduction roof extrusion from Civic > > Garage in Australia. Total cost w/shipping was about $80 (US) for enough for > > both sides and took about 3 weeks to get.� Make sure you get the Coupe > > strip material as they also have Civic material. Hope this helps.
> > �
> > Richard
> > �
> > From:
> > Chuck Dean
> > cadean329@... [2cylinderhondas]
> > Sent:
> > Friday, December 09, 2016 7:59 PM
> > To:
> > Honda 600 group
> > Subject:
> > Re: [2cylinderhondas] Shifter Knob
> > �
> > �
> > Hi Bill, do you
> > reproduce the roof stripes for the 600 Coupe?
> > �
> > Chuck
> > Pleez x cuze enny tie ping or spelin air ores.
> > �
> > �
> > �
> > On Fri, Dec 9, 2016 at 4:25 PM, 'Bill'
> > billmyong@...
> > [2cylinderhondas]
> > > 2cylinderhondas@yahoogroups.c om
> > wrote:
> > > �
> > > [
> > > Attachment(s)
> > > from Bill included
> > > below]
> > > Yes, for Coupe,
> > > Sedan
> > > and in other colors including Skulls,
> > > Burrell wood and carbon fiber look.� Please see attached.
> > > Bill
> > > �
> > > From:
> > > 2cylinderhondas@... m
> > > [mailto:
> > > 2cylinderhondas@yahoog roups.com
> > > ]
> > > Sent:
> > > Friday, December 09, 2016 2:00
> > > PM
> > > To:
> > > 2cylinderhondas@... m
> > > Subject:
> > > Re: [2cylinderhondas] Shifter
> > > Knob
> > > �
> > > �
> > > Bill Colford makes reproduction ones.
> > > ------------------------------ ------------
> > > �
> > > Eric Geiger
> > > PRG-Nocturne
> > > XXX-XXX-XXXX
> > > Egeiger@...
> > > On Dec 9, 2016, at 3:51 PM,
> > > tloch220@...
> > > [2cylinderhondas] > > 2cylinderhondas@yahoogroups.c om
> > > wrote:
> > > > �
> > > > Hi,
> > > > �
> > > > I
> > > > have been working on my Z600 Coupe and it did not come with a shifter > > > > knob.
> > > > �
> > > > I
> > > > know it might be a bit of sacrilege for the purists, but I found that a > > > > 1952 - 1960 VW Beetle has the same thread count and shift pattern as the > > > > 1972 Z600.� And proportionally it is the right size (the generic > > > > shift knob I got from AutoZone was gigantic and made shifting into reverse > > > > very difficult).
> > > > �
> > > > Not
> > > > perfectly accurate, but solved my issue (and it looks kinda cool in ivory > > > > with a black shift pattern engraved into > > > > it).
> > > > �
> > > > My
> > > > best regards,
> > > > Thomas�
> > �
> > This
> > email has been checked for viruses by Avast antivirus software.
> > www.avast.com
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com

Note: 4 image(s) originally linked in this post are no longer available (cid:ii_159dcc313dcefa02, ec, ec +1 more).