Honda N or Z600 Roller Crank

Mark P Hatten · Post by **Mark P Hatten** » Fri May 02, 2014 8:16 am

A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark Portland Or.
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com

Ben Davis · Post by **Ben Davis** » Fri May 02, 2014 8:17 am

I have a spare 360 crank if anyone is interested Sent from my iPad

On 03/05/2014, at 12:46 AM, Mark P Hatten wrote:
A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark
Portland Or.
The 2014 National Microcar Show is at
www.gpnwmme.com
and is sponsored by
www.mphspecialties.com

Connor McCann · Post by **Connor McCann** » Fri May 02, 2014 11:53 am

Who is this other SC microcar enthusiast? �We are few and far between it seems.
-Connor (Soon to be living in Charleston again!)

On Fri, May 2, 2014 at 11:17 AM, Ben Davis
I have a spare 360 crank if anyone is interested
> Sent from my iPad
> On 03/05/2014, at 12:46 AM, Mark P Hatten mphatten@...
> > wrote:
> > �
> > A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
> > �
> > �
> > �
> > https://www.youtube.com/watch?v=1KvHP2q7-YY
> > �
> > �
> > Mark
> > Portland Or.
> > �
> > The 2014 National Microcar Show is at
> > www.gpnwmme.com
> > and is sponsored by
> > www.mphspecialties.com

Mark P Hatten · Post by **Mark P Hatten** » Fri May 02, 2014 11:57 am

Nobu lives in Rock Hill, SC. and has two very nice Honda z600 Coupes
Mark Portland Or.
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com
To: 2cylinderhondas@yahoogroups.com From: thecardude@...
Date: Fri, 2 May 2014 14:53:19 -0400 Subject: Re: [2cylinderhondas] Honda N or Z600 Roller Crank
Who is this other SC microcar enthusiast? We are few and far between it seems.
-Connor (Soon to be living in Charleston again!)

On Fri, May 2, 2014 at 11:17 AM, Ben Davis
I have a spare 360 crank if anyone is interested
> Sent from my iPad
> On 03/05/2014, at 12:46 AM, Mark P Hatten mphatten@...
> > wrote:
> > A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
> > https://www.youtube.com/watch?v=1KvHP2q7-YY
> > Mark
> > Portland Or.
> > The 2014 National Microcar Show is at
> > www.gpnwmme.com
> > and is sponsored by
> > www.mphspecialties.com

Connor McCann · Post by **Connor McCann** » Fri May 02, 2014 12:09 pm

Hey! �My godmother is from there! �Nice! � My mom would be very jealous of his z600 coupes. �She claims to have had one when they were new (I think it was an early Civic though).
Thanks!
-Connor

On Fri, May 2, 2014 at 2:57 PM, Mark P Hatten
Nobu lives in Rock Hill, SC.�and has two very nice Honda z600 Coupes > � > Mark
> Portland Or.
> The 2014 National Microcar Show is at
> www.gpnwmme.com
> and is sponsored by
> www.mphspecialties.com
> �
> To:
> 2cylinderhondas@yahoogroups.com
> From:
> thecardude@...
> Date: Fri, 2 May 2014 14:53:19 -0400
> Subject: Re: [2cylinderhondas] Honda N or Z600 Roller Crank
> �
> Who is this other SC microcar enthusiast? �We are few and far between it seems.
> -Connor
> (Soon to be living in Charleston again!)
> On Fri, May 2, 2014 at 11:17 AM, Ben Davis
> ben.davis50@...
> wrote:
> > I have a spare 360 crank if anyone is interested
> > Sent from my iPad
> > On 03/05/2014, at 12:46 AM, Mark P Hatten > mphatten@...
> > > wrote:
> > > �
> > > A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
> > > �
> > > �
> > > �
> > > https://www.youtube.com/watch?v=1KvHP2q7-YY
> > > �
> > > �
> > > Mark
> > > Portland Or.
> > > �
> > > The 2014 National Microcar Show is at
> > > www.gpnwmme.com
> > > and is sponsored by
> > > www.mphspecialties.com

Mark P Hatten · Post by **Mark P Hatten** » Fri May 02, 2014 1:47 pm

I have one good used crankshaft remaining if anyone is interested.
A fellow Honda microcar enthusiast in SC is interested in my used Honda N600 Crankshafts. These roller cranks are hard to find, and very expensive to rebuild. They seem to fail if the 600 engine is worn or has lack of proper oil changes. I change my oil every 500 miles. These two are in very good / excellent shape. I have stored them well in a weather proof tote, I spin the bearings every so often to keep them moving. Both these Honda 600 microcar cranks are available.
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark Portland Or.
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com

tonipereztf · Post by **tonipereztf** » Mon May 12, 2014 5:54 am

http://youtu.be/cNkrGyp1V-Y
Po favor escuche el ruido.
Gracias

SArya2000 · Post by **SArya2000** » Wed Jun 04, 2014 5:58 am

Ben, I'm interested in the 360 crank - a month later ( haven't logged on for a while). Send me a PM with some info. Thanks

Mark P Hatten · Post by **Mark P Hatten** » Wed Jun 04, 2014 7:06 am

I have one good used remaining crankshaft available
https://www.youtube.com/watch?v=1KvHP2q7-YY
Mark
The 2014 National Microcar Show is at www.gpnwmme.com and is sponsored by www.mphspecialties.com
To: 2cylinderhondas@yahoogroups.com From: 2cylinderhondas@yahoogroups.com Date: Wed, 4 Jun 2014 05:58:21 -0700 Subject: Re: [2cylinderhondas] Honda N or Z600 Roller Crank
Ben, I'm interested in the 360 crank - a month later ( haven't logged on for a while). Send me a PM with some info. Thanks

SArya2000 · Post by **SArya2000** » Thu Jun 05, 2014 12:12 am

I found that regular oil changes alone are not answer to longevity for these little donks. well not the 360cc anyway. My second last crank was starved for oil due to the fine mesh screen on the oil pump pickup being mostly blocked with debris from the primary drive and cam chain guides & idlers. Hence my interest in the crank Ben has. I don't reckon the 600 & 360 are interchangeable. Ben if you read this my email is fredz at mysoul.com.au Regards, Greg

Honda600Forum.com

Honda N or Z600 Roller Crank