Need brake cylinders and master cylinder

[Bill]

Yep, mine came in yesterday.
Good looking tires.

[Mark P Hatten]

Summit charged just $ 65. dollars each. Free shipping. Grand Total for 4 tires shipped was $ 260.   Best deal anywhere currently
Mark
www.mphspecialties.com
Did Summit still charge the additional $8 per tire or just the $65 each?

--- In
anzhonda600owners@yahoogroups.com
, "Bill" wrote:
> Yep, mine came in yesterday.
> Good looking tires.
> _____
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
] On Behalf Of Mark P Hatten
> Sent: Friday, August 16, 2013 3:44 PM
> To:
2cylinderhondas@yahoogroups.com
; Microcar Yahoo group; Mini-Mircro yahoo
> group; Arcane Autos Yahoo group
> Subject: [2cylinderhondas] Coker (King 145R-10 Tires)
> Hi Bill
> I just ordered a set of 4 Kingstires 145r 10 Radials from Summit thru
> Coker, $ 260. for the set, to my door. Free shipping.
> Saved me $ 150. in shipping costs if I'd bought from Coker.
> Thank you .
> Mark
> www.mphspecialties.com
> _____
> To:
2cylinderhondas@yahoogroups.com
> From: mphatten@...
> Date: Fri, 16 Aug 2013 22:27:20 +0000
> Subject: RE: [2cylinderhondas] Coker (King 145R-10 Tires)
> Ok . Calling them again......
> www.mphspecialties.com
> _____
> To:
2cylinderhondas@yahoogroups.com
;
anzhonda600owners@yahoogroups.com
> From: billmyong@...
> Date: Fri, 16 Aug 2013 15:16:18 -0700
> Subject: RE: [2cylinderhondas] Coker (King 145R-10 Tires)
> Mark;
> You have to ask for a price match because Coker sells them for $65.00 and
> that is how I beat the price. And the shipping is free over $99.00.
> Bill
> _____
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
] On Behalf Of Mark P Hatten
> Sent: Friday, August 16, 2013 8:01 AM
> To:
2cylinderhondas@yahoogroups.com
; Honda 600 group; Arcane Autos Yahoo
> group; Mini-Mircro yahoo group; Microcar Yahoo group
> Subject: [2cylinderhondas] Coker (King 145R-10 Tires)
> Yes I called Summit. The 145r-10 Kingstire they have is through Coker and
> are $ 87. bucks each
> The Summit website was wrong. They were going to fix that after my call.
> Mark
> Portland Or.
https://www.youtube.com/watch?v=6Rs0yWG0jwQ
> www.mphspecialties.com
> _____
> To:
2cylinderhondas@yahoogroups.com
> From: infinkc@...
> Date: Fri, 16 Aug 2013 14:42:49 +0000
> Subject: [2cylinderhondas] Re: Coker (King 145R-10 Tires)
> Bill,
> What model is $64? i dont see any on summit that are that cheap. They have a
> 50278, but those are 87 ea.
> --- In
2cylinderhondas@yahoogroups.com
> , "Bill" wrote:
> > Pricing note:
> > Summit Racing Equipment
http://www.summitracing.com/
or call for order at
> > 1.XXX-XXX-XXXX to order these tires at $64.00 each to beat the Coker price
> > and right now they have a special free shipping for orders over $99.00. So
> > your order will be $256.00 to your door unless there is tax. That is about
> > the best deal going.
> > Bill

[Alan Stanyon]

My Daihatsu Hijet van are 12" x110 pcd they fit my Z but they are steel, in the UK Copen and Cuore's are 110 pcd i dont know what they are called in the US worth a look?
Alan
To: anzhonda600owners@yahoogroups.com

[Mark P Hatten]

110 mm x 4 hole is what the US size is for Honda 600's
Very rare wheel size in US.  ,  as 110 mm x 4   13" only used on early Toyota Corolla, early Mazda Rx7, and early Mazda GLC,  these cars are all out of circulation now, however almost every modern Honda ATV and UTV uses 110x4    10"  with knobbies !
Mark
www.mphspecialties.com
To: 2cylinderhondas@yahoogroups.com

[Alan Stanyon]

Some of the ATV wheels look really nice, toyed with th idea for a while then a set of 10" Mini "Minilites" with new 165x70x10 tyres came up cheap and local so i machined the hubs and drums 4" pcd, only problem was the offset mini wheels are negative  but Z and N rims are all positive so i had to extend the arches to cover them thats when "form follows function" Alan
To: 2cylinderhondas@yahoogroups.com

[SArya2000]

I had the same stalling problem a few years ago.  Stop at lights or an intersection and unless I kept the revs up a bit the little pony would just slowly cut out.  Most annoting!
  Turned out to be leaking throttle shaft seals allowing just enough air to enter to lean out the fuel mixture at idle to cause it to stall.   I used small 5/16" x 1/2" seals from a bearing/seal supplier - close enough to the 8x13mm (I think they were) originals to solve the problem.  Still idles just fine.

--- In 2cylinderhondas@yahoogroups.com, wrote:
There is a small filter screen at the needle valve inside the carb. This might be getting clogged or is collapsing. It requires pulling the carb and taking needle valve and floats off to get to it.
Just a guess Mark
> --- In
> 2cylinderhondas@yahoogroups.com
> , "Jennifer F. Kidder" wrote:
> > hey folks,
> > I don't know if you guys do this, I'm hoping your collective expertise can tell me what I'm missing:
> > my '71 N600  Won't Idle!.  I feel like I've been trying to keep it from stalling for 10 years!  but that parinoia might be because that's  how long it has sporatically stalled While I'm  Barreling Along in the Fast Lane!  at the advice of various mechanics, I &/or they have:  swapped out the fuel pump, batttery,  spark plugs / leads,  cleaned carborater & air filter, ...I don't know what else!  & these things haven't worn out again; barely driven over past several years because it's so depressing : sometimes the problem is solved for 3blocks!, 10 miles, 1 month,...
> > last thing  done was new fuel filter. (~2weeks ago) & I paid a mechacic alot to get to the bottom of this problem; that's all he did, & now it's theatening to stall again!  {I really donot wish to disparage this last guy. everyone who  has worked onor helpedme work on this issue, says "yeah, that's not a problem anymore" or worse"it never was"} > > anyway, I had thought the fuel filter made sense. :( > > Now What???
> > --skip