NOS valve cover gasket wanted for mold making purposes

[eric.geiger]

I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
Please contact me directly if you have either of these items and we can work out a deal.
I'm very excited to be able to offer the members of this group a quality product at a great price.
Eric

[richmccolman]

Wow - I think that a lot of us would appreciate getting repro valve cover gaskets, Eric! I've actually been surprised that nobody (to my knowledge, at least) has made these so far. I'll await news that you have them available with great anticipation.
Richard

--- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
> Please contact me directly if you have either of these items and we can work out a deal.
> I'm very excited to be able to offer the members of this group a quality product at a great price.
> Eric

[Love]

Eric, Be aware that there Lazorlite gasket kits that include the valve cover gasket.  It is undersize, do not use.  Good luck, I'll take two.
Bruce D.
Santa Clara, CA From:
eric.geiger To:
2cylinderhondas@yahoogroups.com Sent:
Thu, January 24, 2013 11:41:11 PM Subject:
[2cylinderhondas] NOS valve cover gasket wanted for mold making purposes
I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
Please contact me directly if you have either of these items and we can work out a deal.
I'm very excited to be able to offer the members of this group a quality product at a great price.
Eric

[Eric Geiger]

Thanks for the heads up.
Ill be using original Honda NOS gaskets to make the molds.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On Jan 26, 2013, at 8:07 PM, "Bruce Dewing" wrote:
Eric,
Be aware that there Lazorlite gasket kits that include the valve cover gasket.  It is undersize, do not use.  Good luck, I'll take two.
Bruce D.
Santa Clara, CA
From:
eric.geiger <
egeiger@...
To:
2cylinderhondas@yahoogroups.com
Sent:
Thu, January 24, 2013 11:41:11 PM
Subject:
[2cylinderhondas] NOS valve cover gasket wanted for mold making purposes
I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
Please contact me directly if you have either of these items and we can work out a deal.
I'm very excited to be able to offer the members of this group a quality product at a great price.
Eric

[Don Laughton]

I have one of each NOS N & Z 600 cam cover gasket.  Make an offer, plus shipping.
Best wishes, Don Laughtom Sent from my iPad

On Jan 26, 2013, at 6:59 PM, Eric Geiger wrote:
Thanks for the heads up.
Ill be using original Honda NOS gaskets to make the molds.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com
On Jan 26, 2013, at 8:07 PM, "Bruce Dewing" wrote:
> Eric,
> Be aware that there Lazorlite gasket kits that include the valve cover gasket.  It is undersize, do not use.  Good luck, I'll take two.
> Bruce D.
> Santa Clara, CA
> From:
> eric.geiger egeiger@...
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Thu, January 24, 2013 11:41:11 PM
> Subject:
> [2cylinderhondas] NOS valve cover gasket wanted for mold making purposes
> I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
> Please contact me directly if you have either of these items and we can work out a deal.
> I'm very excited to be able to offer the members of this group a quality product at a great price.
> Eric

[feltonminicycle]

The Lazorlite gaskets were easy to identify. They have the letters THO cast into them. They fit but had to be stretched first.
Back in the day a Lazorlite kit was only $22.oo for top & bottom set but every kit was missing 1 exhaust crush gasket. They were original Honda gaskets repackaged. Lazorlite also offered cam chains, intake & exhaust valves. The exhaust valves were junk - would burn through.
Miles

--- In
2cylinderhondas@yahoogroups.com
, Bruce Dewing wrote:
> Eric,
> Be aware that there Lazorlite gasket kits that include the valve cover gasket.
> It is undersize, do not use. Good luck, I'll take two.
> Bruce D.
> Santa Clara, CA
> From: eric.geiger
> To:
2cylinderhondas@yahoogroups.com
> Sent: Thu, January 24, 2013 11:41:11 PM
> Subject: [2cylinderhondas] NOS valve cover gasket wanted for mold making
> purposes
> I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making
> of reproductions. I am willing to purchase at a fair price and give the seller a
> few free reproductions in exchange when completed.
> Please contact me directly if you have either of these items and we can work out
> a deal.
> I'm very excited to be able to offer the members of this group a quality product
> at a great price.
> Eric

[richmccolman]

Hi Eric,
How's the progress on getting the valve cover gaskets made? (I'm looking forward to getting some for my coupe.)
Thanks!
Richard

--- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
> Please contact me directly if you have either of these items and we can work out a deal.
> I'm very excited to be able to offer the members of this group a quality product at a great price.
> Eric

[Eric Geiger]

The manufacturer currently has all the NOS gaskets and a full cam housing assembly.   Waiting on tooling cost quote.   If all goes well I will have 2-3 samples for testing in like 2 weeks and as long as testing goes well on test vehicles and engines should have production units in about 4 weeks.
Took longer than I was expecting but I want the final product to be perfect and it'll be worth the wait.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On Feb 23, 2013, at 3:23 PM, "richmccolman" wrote:
Hi Eric,
How's the progress on getting the valve cover gaskets made? (I'm looking forward to getting some for my coupe.)
Thanks!
Richard
--- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
> Please contact me directly if you have either of these items and we can work out a deal.
> I'm very excited to be able to offer the members of this group a quality product at a great price.
> Eric

[richmccolman]

Sounds great, Eric -- please keep us all posted!
Richard

--- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> The manufacturer currently has all the NOS gaskets and a full cam housing assembly. Waiting on tooling cost quote. If all goes well I will have 2-3 samples for testing in like 2 weeks and as long as testing goes well on test vehicles and engines should have production units in about 4 weeks.
> Took longer than I was expecting but I want the final product to be perfect and it'll be worth the wait.
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com On Feb 23, 2013, at 3:23 PM, "richmccolman" > wrote:
> Hi Eric,
> How's the progress on getting the valve cover gaskets made? (I'm looking forward to getting some for my coupe.)
> Thanks!
> Richard
> --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > I'm looking for a coupe and sedan NOS valve cover gasket to use for mold making of reproductions. I am willing to purchase at a fair price and give the seller a few free reproductions in exchange when completed.
> > Please contact me directly if you have either of these items and we can work out a deal.
> > I'm very excited to be able to offer the members of this group a quality product at a great price.
> > Eric