Does anyone have a passenger side sun visor for a coupe they wanna sell? looking for one that isn't cracked or damaged. its ok if its a little dirty i don't mind some elbow grease to clean it up.
Thanks
Eric
Coupe sun visor wanted
-
eric.geiger
- Posts: 111
- Joined: Tue Mar 27, 2012 1:56 am
Re: Coupe sun visor wanted
Still looking for this sun visor if anyone can help out. Thanks! I have some freshly replaced parts ill trade as well.
--- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> Does anyone have a passenger side sun visor for a coupe they wanna sell? looking for one that isn't cracked or damaged. its ok if its a little dirty i don't mind some elbow grease to clean it up.
> Thanks
> Eric
-
Eric Geiger
- Posts: 182
- Joined: Tue Apr 03, 2012 8:38 am
Re: Coupe sun visor wanted
that should read freshly re-plated parts. i just had a batch of engine bay parts plated
Eric J. Geiger
Eric J. Geiger
On Dec 14, 2012, at 8:51 AM, eric.geiger wrote:
> Still looking for this sun visor if anyone can help out. Thanks! I have some freshly replaced parts ill trade as well.
> --- In
> 2cylinderhondas@yahoogroups.com
> , "eric.geiger" wrote:
> > Does anyone have a passenger side sun visor for a coupe they wanna sell? looking for one that isn't cracked or damaged. its ok if its a little dirty i don't mind some elbow grease to clean it up.
> > Thanks
> > Eric
-
feltonminicycle
- Posts: 352
- Joined: Mon Apr 14, 2003 2:50 pm
Re: Coupe sun visor wanted
Eric -
Did you see this guys chrome work?
http://www.facebook.com/media/set/?set= ... 346&type=3
if that doesn't come up just look in photos section of our "Vintage Honda S/N/Z 600" Facebook
Miles
Did you see this guys chrome work?
http://www.facebook.com/media/set/?set= ... 346&type=3
if that doesn't come up just look in photos section of our "Vintage Honda S/N/Z 600" Facebook
Miles
--- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> that should read freshly re-plated parts. i just had a batch of engine bay parts plated
> Eric J. Geiger
> On Dec 14, 2012, at 8:51 AM, eric.geiger wrote:
> Still looking for this sun visor if anyone can help out. Thanks! I have some freshly replaced parts ill trade as well.
> --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > Does anyone have a passenger side sun visor for a coupe they wanna sell? looking for one that isn't cracked or damaged. its ok if its a little dirty i don't mind some elbow grease to clean it up.
> > Thanks
> > Eric
-
Eric Geiger
- Posts: 182
- Joined: Tue Apr 03, 2012 8:38 am
Re: Coupe sun visor wanted
a little overkill for me, but nice. I'm sticking with just plating what was originally plated from the factory. just posted more photos
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com
On Dec 15, 2012, at 1:48 PM, feltonminicycle wrote:
> Eric -
> Did you see this guys chrome work?
> http://www.facebook.com/media/set/?set= ... 346&type=3
> if that doesn't come up just look in photos section of our "Vintage Honda S/N/Z 600" Facebook
> Miles
> --- In
> 2cylinderhondas@yahoogroups.com
> , Eric Geiger wrote:
> > that should read freshly re-plated parts. i just had a batch of engine bay parts plated
> > Eric J. Geiger
> > On Dec 14, 2012, at 8:51 AM, eric.geiger wrote:
> > Still looking for this sun visor if anyone can help out. Thanks! I have some freshly replaced parts ill trade as well.
> > --- In
> 2cylinderhondas@yahoogroups.com
> , "eric.geiger" wrote:
> > > Does anyone have a passenger side sun visor for a coupe they wanna sell? looking for one that isn't cracked or damaged. its ok if its a little dirty i don't mind some elbow grease to clean it up.
> > > Thanks
> > > Eric
-
eric.geiger
- Posts: 111
- Joined: Tue Mar 27, 2012 1:56 am
Re: Coupe sun visor wanted
the plated parts i have for trade are all zinc plated with yellow dichromate. NOT CHROME. just like the original factory finish.
--- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> a little overkill for me, but nice. I'm sticking with just plating what was originally plated from the factory. just posted more photos
> Eric J. Geiger
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com On Dec 15, 2012, at 1:48 PM, feltonminicycle wrote:
> Eric -
> Did you see this guys chrome work?
http://www.facebook.com/media/set/?set= ... 346&type=3
> if that doesn't come up just look in photos section of our "Vintage Honda S/N/Z 600" Facebook
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> > that should read freshly re-plated parts. i just had a batch of engine bay parts plated
> > Eric J. Geiger
> > On Dec 14, 2012, at 8:51 AM, eric.geiger wrote:
> > Still looking for this sun visor if anyone can help out. Thanks! I have some freshly replaced parts ill trade as well.
> > --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > > Does anyone have a passenger side sun visor for a coupe they wanna sell? looking for one that isn't cracked or damaged. its ok if its a little dirty i don't mind some elbow grease to clean it up.
> > > Thanks
> > > Eric