alloy wheels for n or z 600

[tortuga]

I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[Eric Geiger]

I was gonna order from here.  I think it was about 600$ total including shipping to the USA.  They will also drill to the correct hole pattern at the factory so u dot need adapters
http://www.tyresave.co.uk/alloyskn.html
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On Jun 30, 2012, at 10:40 PM, "tortuga" wrote:
I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[Eric Geiger]

Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

[feltonminicycle]

I remember back in the '80s people wanted mag wheels but wouldn't pay more than $35.oo ea for them. There was basically only 3 common makers also: Cosmic, Pos-A-Traction & Shelby. The odd ones were 100+, Melbro and some others. I have a photo posted somewhere of all the ones I had seen.
Miroslav (Mike) Kefurt (Honda Car Club of N. Hollywood) had a catalog of parts including fibeglass body kits, rear disc brake kits, 180 degree crank/engine kits, heavy duty clutches and Mini-Lite rims etc. I visited him back in the '80's. By then he was into importing Skoda's and Honda City's but his parking lot was amazing. He must have had 50 Honda 600's parked out front.
Paul - Mike OConnor recently offered mags for sale and Tim Mings would be the other one to try. Put an ad on Craigslist that you are looking to buy Honda 600 parts and you may find a treasure trove.
I have people contact me frequently because they saw my website - people wanting to sell a car. I bought an s600 from a guy in Sacramento because he found me on the web. He said first person who brings me $500.oo can have it ! Rare case on S cars but happens almost weekly on 2 cylinder Honda's.
Anyone know what happened to Tom Dwenger from Uniontown Ohio? He was another seller (like me) from the '80's.
Miles

--- In
2cylinderhondas@yahoogroups.com
, "tortuga" wrote:
> I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[George]

Hi,
I have a set of 4 in good condition with almost new Yokohama 165/70 R10 tires I want to sell. I say almost new in that the nibs on the tread aren't completely worn off yet, but they have been driven a bit. The rims came on a car I bought and I like the originals better.
Contact me directly and I'll send pics and more info.
geo.

--- In
2cylinderhondas@yahoogroups.com
, "tortuga" wrote:
> I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[Troy]

If you don't mind going to a bigger rim, I have read on other Honda 600 sites that the Mazda 13" 4 lug rim would fit, but I've never been able to try it to see.

--- In
2cylinderhondas@yahoogroups.com
, "tortuga" wrote:
> I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[ronny lucassen]

Hello
i recently mounted daihatsu rims 13 inch under my honda Z600
see
ronny

--- In
2cylinderhondas@yahoogroups.com
, "Troy" wrote:
> If you don't mind going to a bigger rim, I have read on other Honda 600 sites that the Mazda 13" 4 lug rim would fit, but I've never been able to try it to see.
> --- In
2cylinderhondas@yahoogroups.com
, "tortuga" wrote:
> > I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[Mark P Hatten]

Ronny,
Those wheels look nice!
Mark
http://www.mphspecialties.com/
To: 2cylinderhondas@yahoogroups.com From: honda-ronny@...
Date: Mon, 2 Jul 2012 06:09:39 +0000 Subject: [2cylinderhondas] Re: alloy wheels for n or z 600
Hello
i recently mounted daihatsu rims 13 inch under my honda Z600
see
ronny

--- In
2cylinderhondas@yahoogroups.com
, "Troy" wrote:
> If you don't mind going to a bigger rim, I have read on other Honda 600 sites that the Mazda 13" 4 lug rim would fit, but I've never been able to try it to see.
> --- In
2cylinderhondas@yahoogroups.com
, "tortuga" wrote:
> > I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated

[Motorcopshop]

I have listed a set of Pos-A-Traction alloy 10 inch wheels on eBay.  The item number is 160835871983  These USA made wheels were sold back when the Z 600 and N 600 were sold new in the USA.  I will be selling some Z 600’s and parts that I own soon as well. I am located in South Carolina.  Thank-you, Eric

[Troy]

I have to agree with Mark, those wheels look pretty sweet, were there any issues with rubbing at all?

--- In
2cylinderhondas@yahoogroups.com
, "ronny lucassen" wrote:
> Hello
> i recently mounted daihatsu rims 13 inch under my honda Z600
> see
> ronny
> --- In
2cylinderhondas@yahoogroups.com
, "Troy" wrote:
> > If you don't mind going to a bigger rim, I have read on other Honda 600 sites that the Mazda 13" 4 lug rim would fit, but I've never been able to try it to see.
> > --- In
2cylinderhondas@yahoogroups.com
, "tortuga" wrote:
> > > I'm looking for a set of rims for my n600 frankly I've been getting nowhere any help would be appreciated