clutch plate or linings

[friend]

All;
The MGB clutch disc material is the same size.  Not as wide but works.
Bill

[Kevin Keough]

thanks ill make a note of that kevin

--- On
Mon, 6/29/09, billmyong@...

wrote:
> From: billmyong@...
> Subject: RE: [2cylinderhondas] Re: clutch plate or linings > To: 2cylinderhondas@yahoogroups.com > Date: Monday, June 29, 2009, 6:52 PM
> All;
> The MGB clutch disc material is the same size.  Not as wide but works.
> Bill
> From:
> 2cylinderhondas@ yahoogroups. com [mailto:2cylinderho ndas@yahoogroups .com] > On Behalf Of > zayjspeed > Sent:
> Sunday, June 28, 2009 1:12 PM
> To:
> 2cylinderhondas@ yahoogroups. com
> Subject:
> [2cylinderhondas] Re: clutch plate or linings
> --- In
> 2cylinderhondas@ yahoogroups. com
> , Kevin Keough wrote:
> > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > --- On Sun, 6/28/09, Greg wrote:
> > Hi Kevin K
> It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to > direct you to "O.E.M." stuff.
> http://www.hondaaut omotiveparts. com/
> go here and enter the info to get to "Clutch" you can see what you have and get part #'s > :::::::::::: ::::::::: ::::Zay
> > From: Greg
> > Subject: [2cylinderhondas] Re: clutch plate or linings
> > To:
> 2cylinderhondas@ yahoogroups. com
> > Date: Sunday, June 28, 2009, 5:24 AM
> > Yeah, I tried that Kev but they reckon it's so small
> > they don't have linings to fit. Maybe they didn't try hard enough.
> > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > --- On Sat, 6/27/09, Greg wrote:
> > > From: Greg
> > > Subject: [2cylinderhondas] clutch plate or linings
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date: Saturday, June 27, 2009, 11:44 PM
> > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

[Greg]

Mark, I'm in WA. BGT must have moved to Dandenong as that's the only Whitepages listing. I've emailed them.
Bill, thanks for that tip on MGB linings.

--- In
2cylinderhondas@yahoogroups.com
, "Mark Kuran" wrote:
> Greg, what state are you in? BGT in Hawthorn, Victoria were able to one for me a few years back.
> Mark.
> --- In
2cylinderhondas@yahoogroups.com
, "Greg" wrote:
> > It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
> > Hey Miles, what do you do for clutches?
> > --- In
2cylinderhondas@yahoogroups.com
, Kevin Keough wrote:
> > > there is a reliner here in tacoma called that has done front pads rear shoes and clutch discs for me south side brake check them out on the internet
> > > --- On Sun, 6/28/09, zayjspeed wrote:
> > > From: zayjspeed
> > > Subject: [2cylinderhondas] Re: clutch plate or linings
> > > To:
2cylinderhondas@yahoogroups.com
> > > Date: Sunday, June 28, 2009, 8:11 PM
> > > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > > > --- On Sun, 6/28/09, Greg wrote:
> > > > Hi Kevin K
> > > It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaaut
omotiveparts. com/ go here and enter the info to get to "Clutch" you can see what you have and get part #'s
> > > :::::::::::: ::::::::: ::::Zay
> > > > From: Greg
> > > > Subject: [2cylinderhondas] Re: clutch plate or linings
> > > > To: 2cylinderhondas@ yahoogroups. com
> > > > Date: Sunday, June 28, 2009, 5:24 AM
> > > > Yeah, I tried that Kev but they reckon it's so small
> > > > they don't have linings to fit. Maybe they didn't try hard enough.
> > > > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > > > --- On Sat, 6/27/09, Greg wrote:
> > > > > From: Greg
> > > > > Subject: [2cylinderhondas] clutch plate or linings
> > > > > To: 2cylinderhondas@ yahoogroups. com
> > > > > Date: Saturday, June 27, 2009, 11:44 PM
> > > > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

[Daniel Middleton]

my clutch shop will reline the disc for 50.00, but only if its not damaged in any way...they will also resurface the press plate too..
To: 2cylinderhondas@yahoogroups.com
From: fredz@...
Date: Tue, 30 Jun 2009 00:02:49 +0000
Subject: [2cylinderhondas] Re: clutch plate or linings
Mark, I'm in WA. BGT must have moved to Dandenong as that's the only Whitepages listing. I've emailed them.
Bill, thanks for that tip on MGB linings.

--- In
2cylinderhondas@ yahoogroups. com
, "Mark Kuran" wrote:
> Greg, what state are you in? BGT in Hawthorn, Victoria were able to one for me a few years back.
> Mark.
> --- In
2cylinderhondas@ yahoogroups. com
, "Greg" wrote:
> > It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
> > Hey Miles, what do you do for clutches?
> > --- In
2cylinderhondas@ yahoogroups. com
, Kevin Keough wrote:
> > > there is a reliner here in tacoma called that has done front pads rear shoes and clutch discs for me south side brake check them out on the internet
> > > --- On Sun, 6/28/09, zayjspeed wrote:
> > > From: zayjspeed
> > > Subject: [2cylinderhondas] Re: clutch plate or linings > > > To:
2cylinderhondas@ yahoogroups. com
> > > Date: Sunday, June 28, 2009, 8:11 PM
> > > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > > > --- On Sun, 6/28/09, Greg wrote:
> > > > Hi Kevin K
> > > It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaaut
omotiveparts. com/ go here and enter the info to get to "Clutch" you can see what you have and get part #'s > > > :::::::::::: ::::::::: ::::Zay
> > > > From: Greg
> > > > Subject: [2cylinderhondas] Re: clutch plate or linings > > > > To: 2cylinderhondas@ yahoogroups. com > > > > Date: Sunday, June 28, 2009, 5:24 AM
> > > > Yeah, I tried that Kev but they reckon it's so small > > > > they don't have linings to fit. Maybe they didn't try hard enough.
> > > > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > > > --- On Sat, 6/27/09, Greg wrote:
> > > > > From: Greg
> > > > > Subject: [2cylinderhondas] clutch plate or linings > > > > > To: 2cylinderhondas@ yahoogroups. com > > > > > Date: Saturday, June 27, 2009, 11:44 PM
> > > > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Windows Live" SkyDrive": Get 25 GB of free online storage.
Get it on your BlackBerry or iPhone.

[Miles]

Bill - Are you sure it's not the MG Midget that is the same size, because as I recall an MGB has about a 10" disc.
Miles

--- In
2cylinderhondas@yahoogroups.com
, wrote:
> All;
> The MGB clutch disc material is the same size. Not as wide but works.
> Bill
> _____
> From:
2cylinderhondas@yahoogroups.com
> [mailto:
2cylinderhondas@yahoogroups.com
] On Behalf Of zayjspeed
> Sent: Sunday, June 28, 2009 1:12 PM
> To:
2cylinderhondas@yahoogroups.com
> Subject: [2cylinderhondas] Re: clutch plate or linings
> --- In 2cylinderhondas@
> yahoogroups.com, Kevin Keough wrote:
> > hay greg i think its a motorcycle type clutch disc try that angle let me
> see what i have i may have something you can use are we working on a 600?
> Kevin
> > --- On Sun, 6/28/09, Greg wrote:
> > Hi Kevin K
> It is not a motorcycle type at all. Here is a link to allow you to see whats
> going on, I do motorcycles and fit a part here and there, but no way on the
> clutch. 1 way is to remove the parts and take them to a brake / clutch shop,
> a real shop! they will be able to re-build your parts (hope fully) at least
> the clutch plate. The more pro members of this site may be able to direct
> you to "O.E.M." stuff.
http://www.hondaaut
omotiveparts.com/
> go here and enter the info to get to "Clutch" you can see what you have and
> get part #'s
> :::::::::::::::::::::::::Zay
> > From: Greg
> > Subject: [2cylinderhondas] Re: clutch plate or linings
> > To: 2cylinderhondas@
> yahoogroups.com
> > Date: Sunday, June 28, 2009, 5:24 AM
> > Yeah, I tried that Kev but they reckon it's so small
> > they don't have linings to fit. Maybe they didn't try hard enough.
> > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough
> wrote:
> > > hay greg you should have a local friction shop in your nearest city thay
> should be able to reline it for you if your core is good let me know if you
> need a good core Kevin
> > > --- On Sat, 6/27/09, Greg wrote:
> > > From: Greg
> > > Subject: [2cylinderhondas] clutch plate or linings
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date: Saturday, June 27, 2009, 11:44 PM
> > > How/what do folks use to repair a worn clutch plate? N360 and N600 are
> same diameter but different part number - maybe hub size. By the way, there
> is a new N600 clutch diaphragm spring on eBay at present # 150355045645

[Miles]

What I do for clutches is 3 years ago I bought 2 new Honda OEM discs from Mike O. I used one and I still have the other one. I'm installing the remaining one in an engine I have been rebuilding for the past 5 years for a friend in Redondo Beach.
The discs I used to get from Napa said Japan & N360 on them. They were cheap, my cost about $35ea, and they worked great.
I had a machine shop make me a fixture for the pressure plates for surfacing. The pressure plate is pretty flexible and needs to be supported in the center during surfacing. The clutch drum on the other hand can just be surfaced along with the ears.
Miles

--- In
2cylinderhondas@yahoogroups.com
, "Greg" wrote:
> Mark, I'm in WA. BGT must have moved to Dandenong as that's the only Whitepages listing. I've emailed them.
> Bill, thanks for that tip on MGB linings.
> --- In
2cylinderhondas@yahoogroups.com
, "Mark Kuran" wrote:
> > Greg, what state are you in? BGT in Hawthorn, Victoria were able to one for me a few years back.
> > Mark.
> > --- In
2cylinderhondas@yahoogroups.com
, "Greg" wrote:
> > > It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
> > > Hey Miles, what do you do for clutches?

[friend]

Hi Miles;
            It could be the midget, but I am speaking from memory and a couple on the shelf that I had done a few years back.  I will check when the shop opens after the Holiday .
Bill

[friend]

Miles, I still use the 80grit sand paper to smooth them off.  Measurements seem to be kind of basic, smooth no glaze is the trick.  I measure on a flat drill press surface and run a dial gauge across several parts of the surface to ensure all is free of significant low points.
Most of the time it’s the rivets that mess them up.
Bill

[Greg]

Miles, N360 palte is 18 spline on a 20mm shaft - that must then be the same as the N600 is it? Greg

--- In
2cylinderhondas@yahoogroups.com
, "Miles" wrote:
> What I do for clutches is 3 years ago I bought 2 new Honda OEM discs from Mike O. I used one and I still have the other one. I'm installing the remaining one in an engine I have been rebuilding for the past 5 years for a friend in Redondo Beach.
> The discs I used to get from Napa said Japan & N360 on them. They were cheap, my cost about $35ea, and they worked great.
> I had a machine shop make me a fixture for the pressure plates for surfacing. The pressure plate is pretty flexible and needs to be supported in the center during surfacing. The clutch drum on the other hand can just be surfaced along with the ears.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, "Greg" wrote:
> > Mark, I'm in WA. BGT must have moved to Dandenong as that's the only Whitepages listing. I've emailed them.
> > Bill, thanks for that tip on MGB linings.
> > --- In
2cylinderhondas@yahoogroups.com
, "Mark Kuran" wrote:
> > > Greg, what state are you in? BGT in Hawthorn, Victoria were able to one for me a few years back.
> > > Mark.
> > > --- In
2cylinderhondas@yahoogroups.com
, "Greg" wrote:
> > > > It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
> > > > Hey Miles, what do you do for clutches?

[friend]

Greg;
            If it has a different part number, it has to be a different part.   I don’t have a 360 shaft to put it on, so not much to tell.
I do have some clutch discs and when I get back I will check on getting them rebuilt.
Bill