clutch plate or linings

Greg · Post by **Greg** » Sat Jun 27, 2009 4:44 pm

How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Kevin Keough · Post by **Kevin Keough** » Sat Jun 27, 2009 9:57 pm

hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin

--- On
Sat, 6/27/09, Greg

wrote:
> From: Greg
> Subject: [2cylinderhondas] clutch plate or linings
> To: 2cylinderhondas@yahoogroups.com
> Date: Saturday, June 27, 2009, 11:44 PM
> How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Greg · Post by **Greg** » Sat Jun 27, 2009 10:25 pm

Yeah, I tried that Kev but they reckon it's so small
they don't have linings to fit. Maybe they didn't try hard enough.

--- In
2cylinderhondas@yahoogroups.com
, Kevin Keough wrote:
> hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> --- On Sat, 6/27/09, Greg wrote:
> From: Greg
> Subject: [2cylinderhondas] clutch plate or linings
> To:
2cylinderhondas@yahoogroups.com
> Date: Saturday, June 27, 2009, 11:44 PM
> How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Kevin Keough · Post by **Kevin Keough** » Sun Jun 28, 2009 7:45 am

hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin

--- On
Sun, 6/28/09, Greg

wrote:
> From: Greg
> Subject: [2cylinderhondas] Re: clutch plate or linings
> To: 2cylinderhondas@yahoogroups.com
> Date: Sunday, June 28, 2009, 5:24 AM
> Yeah, I tried that Kev but they reckon it's so small
> they don't have linings to fit. Maybe they didn't try hard enough.
> --- In
> 2cylinderhondas@ yahoogroups. com
> , Kevin Keough wrote:
> > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > --- On Sat, 6/27/09, Greg wrote:
> > From: Greg
> > Subject: [2cylinderhondas] clutch plate or linings
> > To:
> 2cylinderhondas@
> yahoogroups. com
> > Date: Saturday, June 27, 2009, 11:44 PM
> > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

zayjspeed · Post by **zayjspeed** » Sun Jun 28, 2009 1:12 pm

--- In 2cylinderhondas@yahoogroups.com, Kevin Keough wrote:

> hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> --- On Sun, 6/28/09, Greg wrote:
> Hi Kevin K

It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaautomotiveparts.com/ go here and enter the info to get to "Clutch" you can see what you have and get part #'s
:::::::::::::::::::::::::Zay

> From: Greg
> Subject: [2cylinderhondas] Re: clutch plate or linings
> To:
2cylinderhondas@yahoogroups.com
> Date: Sunday, June 28, 2009, 5:24 AM
> Yeah, I tried that Kev but they reckon it's so small
> they don't have linings to fit. Maybe they didn't try hard enough.
> --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > --- On Sat, 6/27/09, Greg wrote:
> > From: Greg
> > Subject: [2cylinderhondas] clutch plate or linings
> > To: 2cylinderhondas@ yahoogroups. com
> > Date: Saturday, June 27, 2009, 11:44 PM
> > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Kevin Keough · Post by **Kevin Keough** » Sun Jun 28, 2009 2:48 pm

there is a reliner here in tacoma called that has done front pads rear shoes and clutch discs for me south side brake check them out on the internet

--- On
Sun, 6/28/09, zayjspeed

wrote:
> From: zayjspeed
> Subject: [2cylinderhondas] Re: clutch plate or linings
> To: 2cylinderhondas@yahoogroups.com
> Date: Sunday, June 28, 2009, 8:11 PM
> --- In
> 2cylinderhondas@ yahoogroups. com
> , Kevin Keough wrote:
> > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > --- On Sun, 6/28/09, Greg wrote:
> > Hi Kevin K
> It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
> http://www.hondaaut omotiveparts. com/
> go here and enter the info to get to "Clutch" you can see what you have and get part #'s > :::::::::::: ::::::::: ::::Zay
> > From: Greg
> > Subject: [2cylinderhondas] Re: clutch plate or linings
> > To:
> 2cylinderhondas@ yahoogroups. com
> > Date: Sunday, June 28, 2009, 5:24 AM
> > Yeah, I tried that Kev but they reckon it's so small
> > they don't have linings to fit. Maybe they didn't try hard enough.
> > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > hay greg you should
> have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > --- On Sat, 6/27/09, Greg wrote:
> > > From: Greg
> > > Subject: [2cylinderhondas] clutch plate or linings
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date: Saturday, June 27, 2009, 11:44 PM
> > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Greg · Post by **Greg** » Sun Jun 28, 2009 8:34 pm

It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
Hey Miles, what do you do for clutches?

--- In
2cylinderhondas@yahoogroups.com
, Kevin Keough wrote:
> there is a reliner here in tacoma called that has done front pads rear shoes and clutch discs for me south side brake check them out on the internet
> --- On Sun, 6/28/09, zayjspeed wrote:
> From: zayjspeed
> Subject: [2cylinderhondas] Re: clutch plate or linings
> To:
2cylinderhondas@yahoogroups.com
> Date: Sunday, June 28, 2009, 8:11 PM
> --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > --- On Sun, 6/28/09, Greg wrote:
> > Hi Kevin K
> It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaaut
omotiveparts. com/ go here and enter the info to get to "Clutch" you can see what you have and get part #'s
> :::::::::::: ::::::::: ::::Zay
> > From: Greg
> > Subject: [2cylinderhondas] Re: clutch plate or linings
> > To: 2cylinderhondas@ yahoogroups. com
> > Date: Sunday, June 28, 2009, 5:24 AM
> > Yeah, I tried that Kev but they reckon it's so small
> > they don't have linings to fit. Maybe they didn't try hard enough.
> > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > --- On Sat, 6/27/09, Greg wrote:
> > > From: Greg
> > > Subject: [2cylinderhondas] clutch plate or linings
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date: Saturday, June 27, 2009, 11:44 PM
> > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Miles · Post by **Miles** » Sun Jun 28, 2009 8:36 pm

There's a place in San Jose Cal that did 20 discs for me 10 years ago. They have the linings for the 7" disc. They are called Superior Brake & Clutch. Look on the web for a phone number.
Miles

--- In
2cylinderhondas@yahoogroups.com
, "zayjspeed" wrote:
> --- In
2cylinderhondas@yahoogroups.com
, Kevin Keough wrote:
> > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > --- On Sun, 6/28/09, Greg wrote:
> > Hi Kevin K
> It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaautomotiveparts.com/
go here and enter the info to get to "Clutch" you can see what you have and get part #'s
> :::::::::::::::::::::::::Zay
> > From: Greg
> > Subject: [2cylinderhondas] Re: clutch plate or linings
> > To:
2cylinderhondas@yahoogroups.com
> > Date: Sunday, June 28, 2009, 5:24 AM
> > Yeah, I tried that Kev but they reckon it's so small
> > they don't have linings to fit. Maybe they didn't try hard enough.
> > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > --- On Sat, 6/27/09, Greg wrote:
> > > From: Greg
> > > Subject: [2cylinderhondas] clutch plate or linings
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date: Saturday, June 27, 2009, 11:44 PM
> > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Greg · Post by **Greg** » Sun Jun 28, 2009 8:38 pm

Gee that was a quick reply Miles. I look em up.

--- In
2cylinderhondas@yahoogroups.com
, "Miles" wrote:
> There's a place in San Jose Cal that did 20 discs for me 10 years ago. They have the linings for the 7" disc. They are called Superior Brake & Clutch. Look on the web for a phone number.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, "zayjspeed" wrote:
> > --- In
2cylinderhondas@yahoogroups.com
, Kevin Keough wrote:
> > > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > > --- On Sun, 6/28/09, Greg wrote:
> > > Hi Kevin K
> > It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaautomotiveparts.com/
go here and enter the info to get to "Clutch" you can see what you have and get part #'s
> > :::::::::::::::::::::::::Zay
> > > From: Greg
> > > Subject: [2cylinderhondas] Re: clutch plate or linings
> > > To:
2cylinderhondas@yahoogroups.com
> > > Date: Sunday, June 28, 2009, 5:24 AM
> > > Yeah, I tried that Kev but they reckon it's so small
> > > they don't have linings to fit. Maybe they didn't try hard enough.
> > > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > > --- On Sat, 6/27/09, Greg wrote:
> > > > From: Greg
> > > > Subject: [2cylinderhondas] clutch plate or linings
> > > > To: 2cylinderhondas@ yahoogroups. com
> > > > Date: Saturday, June 27, 2009, 11:44 PM
> > > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645

Mark Kuran · Post by **Mark Kuran** » Mon Jun 29, 2009 8:02 am

Greg, what state are you in? BGT in Hawthorn, Victoria were able to one for me a few years back.
Mark.

--- In
2cylinderhondas@yahoogroups.com
, "Greg" wrote:
> It's out of an N360 and I'm in Australia but as I said, the plate is the same diameter as N600.
> Hey Miles, what do you do for clutches?
> --- In
2cylinderhondas@yahoogroups.com
, Kevin Keough wrote:
> > there is a reliner here in tacoma called that has done front pads rear shoes and clutch discs for me south side brake check them out on the internet
> > --- On Sun, 6/28/09, zayjspeed wrote:
> > From: zayjspeed
> > Subject: [2cylinderhondas] Re: clutch plate or linings
> > To:
2cylinderhondas@yahoogroups.com
> > Date: Sunday, June 28, 2009, 8:11 PM
> > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > hay greg i think its a motorcycle type clutch disc try that angle let me see what i have i may have something you can use are we working on a 600? Kevin
> > > --- On Sun, 6/28/09, Greg wrote:
> > > Hi Kevin K
> > It is not a motorcycle type at all. Here is a link to allow you to see whats going on, I do motorcycles and fit a part here and there, but no way on the clutch. 1 way is to remove the parts and take them to a brake / clutch shop, a real shop! they will be able to re-build your parts (hope fully) at least the clutch plate. The more pro members of this site may be able to direct you to "O.E.M." stuff.
http://www.hondaaut
omotiveparts. com/ go here and enter the info to get to "Clutch" you can see what you have and get part #'s
> > :::::::::::: ::::::::: ::::Zay
> > > From: Greg
> > > Subject: [2cylinderhondas] Re: clutch plate or linings
> > > To: 2cylinderhondas@ yahoogroups. com
> > > Date: Sunday, June 28, 2009, 5:24 AM
> > > Yeah, I tried that Kev but they reckon it's so small
> > > they don't have linings to fit. Maybe they didn't try hard enough.
> > > --- In 2cylinderhondas@ yahoogroups. com, Kevin Keough wrote:
> > > > hay greg you should have a local friction shop in your nearest city thay should be able to reline it for you if your core is good let me know if you need a good core Kevin
> > > > --- On Sat, 6/27/09, Greg wrote:
> > > > From: Greg
> > > > Subject: [2cylinderhondas] clutch plate or linings
> > > > To: 2cylinderhondas@ yahoogroups. com
> > > > Date: Saturday, June 27, 2009, 11:44 PM
> > > > How/what do folks use to repair a worn clutch plate? N360 and N600 are same diameter but different part number - maybe hub size. By the way, there is a new N600 clutch diaphragm spring on eBay at present # 150355045645