looking for aluminum rims for my 72 sedan??

lt1ski · Post by **lt1ski** » Thu Apr 16, 2009 3:17 pm

looking for any aftermarket style rims for my 72 sedan, used new or waht have ya.....any tips would be great

lt1ski · Post by **lt1ski** » Thu Apr 16, 2009 3:17 pm

looking for any aftermarket style rims for my 72 sedan, used new or waht have ya.....any tips would be great

isettakurt · Post by **isettakurt** » Fri Apr 17, 2009 8:38 am

How about Mazda RX7 aluminum rims?

bottom cop · Post by **bottom cop** » Tue Apr 21, 2009 3:27 pm

Does anyone know what size tires would work best on these rims?

--- On
Fri, 4/17/09, Dave Kornberg

wrote:
> From: Dave Kornberg
> Subject: [2cylinderhondas] Re:looking for aluminum rims for my 72 sedan??
> To: 2cylinderhondas@yahoogroups.com
> Date: Friday, April 17, 2009, 11:38 AM
> How about Mazda RX7 aluminum rims?

friend · Post by **friend** » Wed Apr 22, 2009 12:12 am

Original size was 13 inch and when used on a Honda 600 Coupe they need 50 series. Height comes in just about 22 inches.
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > bottom cop > Sent:
> Tuesday, April 21, 2009 3:27
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] Re:looking for aluminum rims for my 72 > sedan??
> Does anyone know what size tires would work best on these
> rims?
> --- On
> Fri, 4/17/09, Dave Kornberg
>
> wrote:
> > From:
> > Dave Kornberg
> > Subject:
> > [2cylinderhondas] Re:looking for aluminum rims for my 72 > > sedan??
> > To: 2cylinderhondas@ yahoogroups. com
> > Date:
> > Friday, April 17, 2009, 11:38 AM
> > How about Mazda RX7 aluminum rims?
> > http://groups. yahoo.com/ group/2cylinderh ondas/photos/ album/XXX-XXX-XXXX /pic/list

Miles · Post by **Miles** » Wed Apr 22, 2009 7:29 pm

Don't forget to get a bucketload of new wheel bearings to go with your aftermarket rims. The offsets are wrong and cause s added stress to the wheel bearings. If you let the front ones go unrepaired you will wear a groove in the driveshaft and then you will have to find more of those too !
Miles

--- In
2cylinderhondas@yahoogroups.com
, bottom cop wrote:
> Does anyone know what size tires would work best on these rims?
> --- On Fri, 4/17/09, Dave Kornberg wrote:
> From: Dave Kornberg
> Subject: [2cylinderhondas] Re:looking for aluminum rims for my 72 sedan??
> To:
2cylinderhondas@yahoogroups.com
> Date: Friday, April 17, 2009, 11:38 AM
> How about Mazda RX7 aluminum rims?

dean m · Post by **dean m** » Wed Apr 22, 2009 7:34 pm

thats a good point not to mention a 13' rim really takes away from the look of the car....just my opinion 10 inch is the way to go

--- On Wed, 4/22/09, Miles wrote:
> From: Miles Subject: [2cylinderhondas] 13" rims
> To:
2cylinderhondas@yahoogroups.com
> Date: Wednesday, April 22, 2009, 7:29 PM
> Don't forget to get a bucketload of new wheel bearings
> to go with your aftermarket rims. The offsets are wrong and
> cause s added stress to the wheel bearings. If you let the
> front ones go unrepaired you will wear a groove in the
> driveshaft and then you will have to find more of those too
> !
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, bottom cop
> wrote:
> > Does anyone know what size tires would work best on
> these rims?
> > --- On Fri, 4/17/09, Dave Kornberg
> wrote:
> > From: Dave Kornberg
> > Subject: [2cylinderhondas] Re:looking for aluminum
> rims for my 72 sedan??
> > To:
2cylinderhondas@yahoogroups.com
> > Date: Friday, April 17, 2009, 11:38 AM
> > How about Mazda RX7 aluminum rims?

Honda600Forum.com

looking for aluminum rims for my 72 sedan??