> --- In
> 2cylinderhondas@ yahoogroups. com
> , Ronnie Davis ...> wrote:
> >Do you need the part #? They are not available through Honda any longer.
> > I need a mastercylender for a n600 Thank RCD
> > To:
> 2cylinderhondas@ yahoogroups. com
> > From: jjtecal@...
> > Date: Tue, 31 Mar 2009 06:18:38 +0000
> > Subject: [2cylinderhondas] Re: Repro parts
> > --- In
> 2cylinderhondas@ yahoogroups. com
> , "jackel8122" wrote:
> > > I also have a printed copy of the parts book for Z600 and N600 if you need to find out a # on parts or the online catalog at work.
> > > --- In
> 2cylinderhondas@ yahoogroups. com
> , wrote:
> > > Yeah I have checked every part I could think of and have bought what I could through Honda. We do have a locator and a parts information system that can give me a parts fits if you have a part #.
> > > > Have you checked into availbilty of parts for these? Do you guys have a dealer locator for parts?
> > > > Mike
> > > > ---- jackel8122 wrote:
> > > > > Thanks, I can get fuel filters and oil filters all day from Honda. I work in the parts department at a Honda dealership.
> > > > > --- In
> 2cylinderhondas@ yahoogroups. com
> , "Miles" wrote:
> > > > > > I sell fuel filters, only $4.00 postage for 3 pieces.
> > > > > > Miles
> > > > > > --- In
> 2cylinderhondas@ yahoogroups. com
> , "James Hawkins" wrote:
> > > > > > > Shipping is also a killer on Parts Train. I was going to order 3 gas filters and oil filter cap. S&H was higher than the 4 small light items. I said forget it.
> > > > > > > ----- Original Message -----
> > > > > > > From: Charles M
> > > > > > > To:
> 2cylinderhondas@ yahoogroups. com
> > > > > > > Sent: Monday, March 23, 2009 8:06 PM
> > > > > > > Subject: RE: [2cylinderhondas] Re: Repro parts
> > > > > > > I have dealt with them. Some prices are high. Fast shipping. I think they are ok.
> > > > > > > Chuck
> > > > > > > ------------ --------- --------- --------- --------- --------- -
> > > > > > > To:
> 2cylinderhondas@ yahoogroups. com
> > > > > > > From: jjtecal@
> > > > > > > Date: Mon, 23 Mar 2009 22:06:11 +0000
> > > > > > > Subject: [2cylinderhondas] Re: Repro parts
> > > > > > > Has anyone dealt with cmsnl.com before? They seem to have tons of parts still. The only catch would be the shipping.
> > > > > > > --- In
> 2cylinderhondas@ yahoogroups. com
> , wrote:
> > > > > > > > Miles is so right;
> > > > > > > > It's not so much getting the part made or finding people that want to do
> > > > > > > > the work. It comes down to how many. I have talked to several companies
> > > > > > > > about making lenses, all say it is not a problem, but they want a minimum
> > > > > > > > run of 1000 parts. And, I have to pay for the tooling and set up fees. So,
> > > > > > > > the initial cost is 6K for tooling and set up for a left and right brake
> > > > > > > > light lens. Then add an additional $15.00 a lens and don't forget the
> > > > > > > > minimum run of 1K each. Outlay is $36K, now divide that by the number of
> > > > > > > > Honda AN600's left on the road. With my list of Honda 600's on the road
> > > > > > > > totaling about 250 the math does not give a good pay back on the out put.
> > > > > > > > Recently I had the 3 Heat Exchanger gaskets for Sedans built after 1 Apr
> > > > > > > > 71 and all Coupes. Ready to install Honda Part numbers 18412-623-670,
> > > > > > > > 18435-623-670 and 18456-623-670. For almost the same price Honda was
> > > > > > > > selling them in their last book, which came out in 1996. Keeping prices to
> > > > > > > > the lowest level is the goal and allows Honda 600 owners the capability of
> > > > > > > > keeping their Honda 600 on the road.
> > > > > > > > Contact me for for these and other items.
> > > > > > > > Bill
> > > > > > > > -----Original Message-----
> > > > > > > > From:
> 2cylinderhondas@ yahoogroups. com
> > > > > > > > [mailto:
> 2cylinderhondas@ yahoogroups. com
> ]On Behalf Of Miles
> > > > > > > > Sent: Thursday, March 19, 2009 8:00 PM
> > > > > > > > To:
> 2cylinderhondas@ yahoogroups. com
> > > > > > > > Subject: [2cylinderhondas] Re: Repro parts
> > > > > > > > I have made parts and I still make some parts. The Oil pump rods I made
> > > > > > > > cost me $75.00 each, I put out about $1800.00 to get a batch made. It took 3
> > > > > > > > years to resell them all.
> > > > > > > > I had a batch of flywheel pullers produced, maybe 100 pieces. But the
> > > > > > > > machinist wouldn't make any more for me as he broke 10 or more carbide tool
> > > > > > > > bits. And it took 5 years for me to sell all of those.
> > > > > > > > I currently make shifter bushings and steering rack bushings when I have
> > > > > > > > time, I have machinery at home.
> > > > > > > > I rebuild items such as fan pullies but they take too much time and money
> > > > > > > > in parts to make any money on.
> > > > > > > > Mike OConnor has piston kits made and Bill Colford has head gaskets made
> > > > > > > > and has a DIY kit for the other gaskets, he also has a number of other
> > > > > > > > products available.
> > > > > > > > I think if you go look in the Database section of this group you will find
> > > > > > > > a list of repro'd items.
> > > > > > > > Miles
> > > > > > > > --- In
> 2cylinderhondas@ yahoogroups. com
> , "jackel8122" wrote:
> > > > > > > > > Why haven't people began making reproduction parts for the N and Z.
> > > > > > > ------------ --------- --------- --------- --------- --------- -
> > > > > > > Internet Explorer 8 Now Available. Faster, safer, easier. Download FREE now!
> > > > > > > ------------ --------- --------- --------- --------- --------- -
> > > > > > > No virus found in this incoming message.
> > > > > > > Checked by AVG -
www.avg.com
> > > > > > > Version: 8.0.238 / Virus Database: 270.11.25/2019 - Release Date: 03/23/09 18:51:00
> > ____________ _________ _________ _________ _________ _________ _
> > Internet Explorer 8 � Get your Hotmail Accelerated. Download free!
>
http://clk.atdmt. com/MRT/go/ 141323790/ direct/01/
Msg sent via CableONE.net MyMail -
http://www.cableone.net