Bill
> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > James Hawkins > Sent:
> Monday, March 23, 2009 5:26
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] Re: Repro parts
> Shipping is also a killer on Parts Train. I was going to order 3 gas > filters and oil filter cap. S&H was higher than the 4 small light > items. I said forget it.
> > ----- Original Message -----
> > From:
> > Charles M
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > Sent:
> > Monday, March 23, 2009 8:06
> > PM
> > Subject:
> > RE: [2cylinderhondas] Re:
> > Repro parts
> > I have dealt with them. Some prices are high. Fast shipping. I think they > > are ok.
> > Chuck
> > To:
> > 2cylinderhondas@ yahoogroups. com
> > From:
> > jjtecal@comcast. net
> > Date:
> > Mon, 23 Mar 2009 22:06:11 +0000
> > Subject: [2cylinderhondas] Re: Repro
> > parts
> > Has anyone dealt with cmsnl.com before? They seem
> > to have tons of parts still. The only catch would be the > > shipping.
> > --- In
> > 2cylinderhondas@ yahoogroups. com
> > ,
> > wrote:
> > > Miles is so right;
> > > It's not so much getting the part made or finding people that want > > to do > > > the work. It comes down to how many. I have talked to several > > companies > > > about making lenses, all say it is not a problem, but they > > want a minimum > > > run of 1000 parts. And, I have to pay for the tooling > > and set up fees. So, > > > the initial cost is 6K for tooling and set up > > for a left and right brake > > > light lens. Then add an additional $15.00 > > a lens and don't forget the > > > minimum run of 1K each. Outlay is $36K, > > now divide that by the number of > > > Honda AN600's left on the road.
> > With my list of Honda 600's on the road
> > > totaling about 250 the math
> > does not give a good pay back on the out put.
> > > Recently I
> > had the 3 Heat Exchanger gaskets for Sedans built after 1 Apr > > > 71 and > > all Coupes. Ready to install Honda Part numbers 18412-623-670,
> > 18435-623-670 and 18456-623-670. For almost the same price Honda was
> > selling them in their last book, which came out in 1996. Keeping prices > > to > > > the lowest level is the goal and allows Honda 600 owners the > > capability of > > > keeping their Honda 600 on the road.
> > Contact me for for these and other items.
> > > Bill
> > > -----Original Message-----
> > > From:
> > 2cylinderhondas@ yahoogroups. com
> > [mailto:
> > 2cylinderhondas@ yahoogroups. com
> > ]On
> > Behalf Of Miles
> > > Sent: Thursday, March 19, 2009 8:00 PM
> > > To:
> > 2cylinderhondas@ yahoogroups. com
> > Subject: [2cylinderhondas] Re: Repro parts
> > > I have
> > made parts and I still make some parts. The Oil pump rods I made
> > cost me $75.00 each, I put out about $1800.00 to get a batch made. It took > > 3 > > > years to resell them all.
> > > I had a batch of
> > flywheel pullers produced, maybe 100 pieces. But the > > > machinist > > wouldn't make any more for me as he broke 10 or more carbide tool
> > bits. And it took 5 years for me to sell all of those.
> > > I
> > currently make shifter bushings and steering rack bushings when I > > have > > > time, I have machinery at home.
> > > I rebuild
> > items such as fan pullies but they take too much time and money > > > in > > parts to make any money on.
> > > Mike OConnor has piston kits
> > made and Bill Colford has head gaskets made
> > > and has a DIY kit for
> > the other gaskets, he also has a number of other
> > > products
> > available.
> > > I think if you go look in the Database section
> > of this group you will find
> > > a list of repro'd items.
> > > Miles
> > > --- In
> > 2cylinderhondas@ yahoogroups. com
> > ,
> > "jackel8122" wrote:
> > > > Why haven't
> > people began making reproduction parts for the N and Z.
> > Internet Explorer 8 Now Available. Faster, safer, easier.
> > Download
> > FREE now!
> > No virus found in this incoming message.
> > Checked by AVG -
> > www.avg.com
> > Version: 8.0.238 / Virus Database: 270.11.25/2019 - Release > > Date: 03/23/09 18:51:00