Have engine for sale

Stephen V. Weaver Jr. · Wed Mar 11, 2009 11:33 am

My newest Honda 600 runs well, therefore my extra engine is available. Has new rings, freshened valves, good oil flow, sounds good ! Please call if interested XXX-XXX-XXXX

jeremy grosvenor · Post by **jeremy grosvenor** » Wed Mar 11, 2009 7:30 pm

Starter question. Does it matter if I take my starter to any repair shop or should it be a Honda specialist?
regards.
Jeremy NY

bottom cop · Post by **bottom cop** » Wed Mar 11, 2009 7:33 pm

Anyone who specializes in starter, generator or alternator repairs should be able to make the repairs.

--- On
Wed, 3/11/09, jeremy grosvenor

wrote:
> From: jeremy grosvenor
> Subject: Re: [2cylinderhondas] starter question
> To: 2cylinderhondas@yahoogroups.com
> Date: Wednesday, March 11, 2009, 10:29 PM
> Starter question. Does it matter if I take my starter to any repair shop or should it be a Honda specialist?
> regards.
> Jeremy NY

friend · Post by **friend** » Wed Mar 11, 2009 11:50 pm

Jeremy;
Any good repair shop can do a good job, but because a number of jobber manuals say that a Datsun Bendix will fit on a Honda starter you have to make sure that they rebuild your Honda Bendix as the Datsun unit is wrong. I have to say this again, the Datsun Bendix is not OK to use on your Honda 600 starter. If the shop does not know where to have the Bendix rebuilt, go to another shop. In fact, ask your local NAPA dealer where they have their starters rebuilt at, and take it there.
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > jeremy grosvenor > Sent:
> Wednesday, March 11, 2009 6:30
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] starter question
> Starter question. Does it matter if I take my
> starter to any repair shop or should it be a Honda > specialist?
> regards.
> Jeremy NY

Dave Kohn · Post by **Dave Kohn** » Thu Mar 12, 2009 8:40 am

Where are you loctaed? And how much?
Dave Kohn
Long Island ,NY

Dave Kohn · Post by **Dave Kohn** » Thu Mar 12, 2009 8:45 am

Jeremy:
Check out Bowen Electric on Jericho Turnpike in Floral Park. They have rebuilt starters and generators for Harleys for me for years and they are excellent. They should be able to do your Honda with no problem. Let me know how you make out.
Dave Kohn
West Hempstead,NY

jeremy grosvenor · Post by **jeremy grosvenor** » Thu Mar 12, 2009 5:41 pm

Thanks Dave!

--- On
Thu, 3/12/09, Dave Kohn

wrote:
> From: Dave Kohn
> Subject: [2cylinderhondas] Re: starter question
> To: 2cylinderhondas@yahoogroups.com
> Date: Thursday, March 12, 2009, 5:44 AM
> Jeremy:
> Check out Bowen Electric on Jericho Turnpike in Floral Park. They have rebuilt starters and generators for Harleys for me for years and they are excellent. They should be able to do your Honda with no problem. Let me know how you make out.
> Dave Kohn
> West Hempstead,NY

Miles · Post by **Miles** » Thu Mar 12, 2009 9:09 pm

I have 2 rebuilt starters still. I had 10, but sold them mostly on eBay for $95ea. So I could sell the last 2 as I don't need them right now. Please email me off list for more info.
They do have the correct drives in them, I might be able to find the pictures as well.
Miles in California.

--- In
2cylinderhondas@yahoogroups.com
, jeremy grosvenor wrote:
> Thanks Dave!
> --- On Thu, 3/12/09, Dave Kohn wrote:
> From: Dave Kohn
> Subject: [2cylinderhondas] Re: starter question
> To:
2cylinderhondas@yahoogroups.com
> Date: Thursday, March 12, 2009, 5:44 AM
> Jeremy:
> � Check out Bowen Electric on Jericho Turnpike in Floral Park. They have rebuilt starters and generators for Harleys for me for years and they are excellent. They should be able to do your Honda with no problem. Let me know how you make out.
> �
> Dave Kohn
> West Hempstead,NY

Don Foco · Post by **Don Foco** » Sun Mar 15, 2009 6:44 am

Hi Miles,
I'll take one of those starters off your hands in a month if you still have, have had to put a ton of bucks in my pickup recently and am almost caught back up. I'll be running fires in a few weeks and will have alot of OT. I have it running okay but doesn't seem to have the power it should have. I noticed when I had points cover off a(when running) the camshaft moving sideways a bit, doesn't appear to be chattering. It seemed to have power when I first had it running, (when the carb was messed up) so I don't think it is valves....what is the compression normally supposed to be? Thanks, Don

--- On
Fri, 3/13/09, Miles

wrote:
From: Miles
Subject: [2cylinderhondas] Re: starter question
To: 2cylinderhondas@yahoogroups.com
Date: Friday, March 13, 2009, 12:09 AM
I have 2 rebuilt starters still. I had 10, but sold them mostly on eBay for $95ea. So I could sell the last 2 as I don't need them right now. Please email me off list for more info.
They do have the correct drives in them, I might be able to find the pictures as well.
Miles in California.
--- In
2cylinderhondas@ yahoogroups. com
, jeremy grosvenor wrote:
> Thanks Dave!
> --- On Thu, 3/12/09, Dave Kohn wrote:
> From: Dave Kohn
> Subject: [2cylinderhondas] Re: starter question
> To:
2cylinderhondas@ yahoogroups. com
> Date: Thursday, March 12, 2009, 5:44 AM
> Jeremy:
> Check out Bowen Electric on Jericho Turnpike in Floral Park. They have rebuilt starters and generators for Harleys for me for years and they are excellent. They should be able to do your Honda with no problem. Let me know how you make out.
> Dave Kohn
> West Hempstead,NY