Begging time

[Bill]

Okay everyone. Now I am on my knees. Does anyone have a carb rebuild
kit or a decent carb for a 71 Z600? Had to have it towed home
yesterday with a big puddle of gas underneath. I am 99% sure that its
my carb giving me the problems I have posted here. Also, since I
can't get my tensioner to loosen, is it possible to remove the two
side plates and lift the chain up enough to move the sprocket? Yes I
am a crabby mess. Thanks,
Bill in Missouri
p.s. Bill, I will probably need one of those nitrate o-rings for my
carb. Let me know how to get one.

[minidrum69]

Bill,
Send me a private email off the group and I'll send you my phone number. I
might be able to help with some of your issues.
Robert

[Fred]

As mentioned previously, you can buy a carb rebuild kit for a Honda
VL1000 on ebay for fairly cheap. Just remove the tabs on the big
gasket and it will all be a perfect fit.
Or you can send in your carb to Miles or Mike and they both do rebuilds.

--- In
2cylinderhondas@yahoogroups.com
, "Bill" wrote:
> Okay everyone. Now I am on my knees. Does anyone have a carb rebuild
> kit or a decent carb for a 71 Z600? Had to have it towed home
> yesterday with a big puddle of gas underneath. I am 99% sure that its
> my carb giving me the problems I have posted here. Also, since I
> can't get my tensioner to loosen, is it possible to remove the two
> side plates and lift the chain up enough to move the sprocket? Yes I
> am a crabby mess. Thanks,
> Bill in Missouri
> p.s. Bill, I will probably need one of those nitrate o-rings for my
> carb. Let me know how to get one.

[Bill]

Can someone send me a link for this part? I can't find one on eBay
currently. Thanks,
Bill in Missouri

--- In
2cylinderhondas@yahoogroups.com
, "mtimion" wrote:
> As mentioned previously, you can buy a carb rebuild kit for a Honda
> VL1000 on ebay for fairly cheap. Just remove the tabs on the big
> gasket and it will all be a perfect fit.
> Or you can send in your carb to Miles or Mike and they both do
rebuilds.
> --- In
2cylinderhondas@yahoogroups.com
, "Bill" wrote:
> > Okay everyone. Now I am on my knees. Does anyone have a carb
rebuild
> > kit or a decent carb for a 71 Z600? Had to have it towed home
> > yesterday with a big puddle of gas underneath. I am 99% sure
that its
> > my carb giving me the problems I have posted here. Also, since I
> > can't get my tensioner to loosen, is it possible to remove the
two
> > side plates and lift the chain up enough to move the sprocket?
Yes I
> > am a crabby mess. Thanks,
> > Bill in Missouri
> > p.s. Bill, I will probably need one of those nitrate o-rings for
my
> > carb. Let me know how to get one.

[iain]

http://www.honda600shop.com/parts.php?C ... +%26+Z+600

On 11/12/06, Bill wrote:
> Can someone send me a link for this part? I can't find one on eBay
> currently. Thanks,
> Bill in Missouri
> --- In
2cylinderhondas@yahoogroups.com
,
> "mtimion" wrote:
> > As mentioned previously, you can buy a carb rebuild kit for a Honda
> > VL1000 on ebay for fairly cheap. Just remove the tabs on the big
> > gasket and it will all be a perfect fit.
> > Or you can send in your carb to Miles or Mike and they both do
> rebuilds.
> > --- In
2cylinderhondas@yahoogroups.com
,
> "Bill" wrote:
> > > Okay everyone. Now I am on my knees. Does anyone have a carb
> rebuild
> > > kit or a decent carb for a 71 Z600? Had to have it towed home
> > > yesterday with a big puddle of gas underneath. I am 99% sure
> that its
> > > my carb giving me the problems I have posted here. Also, since I
> > > can't get my tensioner to loosen, is it possible to remove the
> two
> > > side plates and lift the chain up enough to move the sprocket?
> Yes I
> > > am a crabby mess. Thanks,
> > > Bill in Missouri
> > > p.s. Bill, I will probably need one of those nitrate o-rings for
> my
> > > carb. Let me know how to get one.