Getting exhaust piping bent??

[infinkc]

I finally sourced a rusted up tailpipe for a coupe, but i cannot
located a shop that can bend 1 1/4 steel tubing :( i bought some steel
tubing already that matches the original tailpipe size. Ive tried all
the muffler shops in my area and a few fabrication places and none
have a die for 1 1/4, smallest shops have is 1 1/2. Any place that im
missing to see if they can bend this tubing? TIA.

[Steve Wander]

How about a motorcycle shop? How close is it to EMT? They have benders for that at Home stores.

> ----- Original Message -----
> From:
> infinkc
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Monday, June 05, 2006 9:17 PM
> Subject:
> [2cylinderhondas] Getting
> exhaust piping bent??
> I finally sourced a rusted up tailpipe for a coupe, but i cannot
> located a shop that can bend 1 1/4 steel tubing :( i bought some steel
> tubing already that matches the original tailpipe size. Ive tried all
> the muffler shops in my area and a few fabrication places and none
> have a die for 1 1/4, smallest shops have is 1 1/2. Any place that im
> missing to see if they can bend this tubing? TIA.