Canadian members?

forumadmin · Post by **forumadmin** » Thu Dec 08, 2005 7:24 am

Hi
I live in London Ontario Canada. I have and drive a 1971 AN600
sedan. Are there any other members of this group in the south western
Ontario area? mike morris

mterrens · Post by **mterrens** » Thu Dec 08, 2005 7:30 am

Look at this, then add your name...
http://www.frappr.com/hondaszn360600carowners

> ----- Original Message -----
> From:
> mike
> morris
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Thursday, December 08, 2005 10:24
> AM
> Subject:
> [2cylinderhondas] Canadian
> members?
> Hi
> I live in London Ontario Canada. I
> have and drive a 1971 AN600
> sedan. Are there any other members of this
> group in the south western
> Ontario
> area?
> mike morris
> ------------------------ Yahoo! Groups
> Sponsor --------------------~-->
> Get fast access to your favorite
> Yahoo! Groups. Make Yahoo! your home page
> http://us.click.yahoo.com/dpRU5A/wUILAA ... /fnTolB/TM
> --------------------------------------------------------------------~->

Lyle · Post by **Lyle** » Fri Dec 09, 2005 12:20 am

Hi Mike;
Send your chassis, engine and date of manufacture numbers along with your
full name address and phone number to billmyong@... and I will
send you a list of all the Canadian Owners I have listed on the Honda 600
roster of owners. As you know there are not many. But your name will be one
more. For more information on the Roster go to, www.honda600owners.com
Bill

celticcase · Post by **celticcase** » Sat Jan 28, 2006 8:58 am

Hi Mike,
I am Cobourg Ontario, just to the east of Toronto, and am actually on
my way out the door to see a 1970 AN600 sedan, condition is rough,
but I believe restoratble. This will be my first air cooled Honda,
but I also currently own 3 S600's and a 1976 Civic CVCC.
I will let you know if I end up pirchasing it.
Cheers,
Colin

laurie_randall · Post by **laurie_randall** » Sat Jan 28, 2006 4:45 pm

Thanks Colin. My 71 AN600 is my summer city beater. Starts, stops and
runs quite reliably. Not very pretty but it gets the job done. Now over
100,000 miles it keeps on ticking. Amazing. mike

>From: "honda600lover" Reply-To:
2cylinderhondas@yahoogroups.com
>To:
2cylinderhondas@yahoogroups.com
>Subject: [2cylinderhondas] Re: Canadian members?
>Date: Sat, 28 Jan 2006 16:57:28 -0000
>Hi Mike,
>I am Cobourg Ontario, just to the east of Toronto, and am actually on
>my way out the door to see a 1970 AN600 sedan, condition is rough,
>but I believe restoratble. This will be my first air cooled Honda,
>but I also currently own 3 S600's and a 1976 Civic CVCC.
>I will let you know if I end up pirchasing it.
>Cheers,
>Colin
>--- In
2cylinderhondas@yahoogroups.com
, "Steven Michelsen"
> wrote:
> > Look at this, then add your name...
http://www.frappr.com/hondaszn360600carowners
> > ----- Original Message -----
> > From: mike morris
> > To:
2cylinderhondas@yahoogroups.com
> > Sent: Thursday, December 08, 2005 10:24 AM
> > Subject: [2cylinderhondas] Canadian members?
> > Hi
> > I live in London Ontario Canada. I have and drive a 1971 AN600
> > sedan. Are there any other members of this group in the south
>western
> > Ontario area? mike morris

joelanderson128 · Post by **joelanderson128** » Sun Jan 29, 2006 12:40 pm

Hi Mike,
Well, I did it, I purchased the little N600. It is actually a 1971 (prod. 10/70)
VIN number ANXXX-XXX-XXXX. It has only 33,000 miles, original paint (whats left of it)
and although I thought the engine was seized, it in fact rotates smoothly with a wrench ont the crank pulley bolt. This one will not be a perfect car when I am done with it, I will save the good body job for a qualified body shop down the road. Rear seat and ignition switch are missing, but that is it.
Outer rockers are rough, but all other rust is minor and mostly only surface, the floors are PERFECT! except for one hole in the drivers floor, about 2 inches in diameter.
It is an original Ontario car, the previous owner purchased it used in 1974 from Race Motors in Lindsay, Ontario.
Do you have any pictures of your N600?
You can email me at my home address:
amy.kennedy@...
Cheers,
Colin
michael morris wrote:

> Thanks Colin. My 71 AN600 is my summer city beater. Starts, stops and > runs quite reliably. Not very pretty but it gets the job done. Now over > 100,000 miles it keeps on ticking. Amazing. mike > >From: "honda600lover" > >Reply-To: 2cylinderhondas@yahoogroups.com > >To: 2cylinderhondas@yahoogroups.com > >Subject: [2cylinderhondas] Re: Canadian members?
> >Date: Sat, 28 Jan 2006 16:57:28 -0000
> >Hi Mike,
> >I am Cobourg Ontario, just to the east of Toronto, and am actually on > >my way out the door to see a 1970 > AN600 sedan, condition is rough, > >but I believe restoratble. This will be my first air cooled Honda, > >but I also currently own 3 S600's and a 1976 Civic CVCC.
> >I will let you know if I end up pirchasing it.
> >Cheers,
> >Colin
> >--- In 2cylinderhondas@yahoogroups.com, "Steven Michelsen" > > wrote:
> > > Look at this, then add your name...
> http://www.frappr.com/hondaszn360600carowners
> > >   ----- Original Message -----
> > >   From: mike morris
> > >   To: 2cylinderhondas@yahoogroups.com
> > >   Sent: Thursday, December 08, 2005 10:24 AM
> > >   Subject: [2cylinderhondas] Canadian members?
> > >     Hi
> > >      I live in London Ontario
> Canada. I have and drive a 1971 AN600
> > >   sedan. Are there any other members of this group in the south > >western > > >   Ontario area?                          mike morris

Bring words and photos together (easily) with
PhotoMail - it's free and works with Yahoo! Mail.

Lyle · Post by **Lyle** » Sun Jan 29, 2006 10:53 pm

Here is a owner looking to find a good home for some parts cars. If you need to get in touch with him quick;
Bill

> .
> -----Original Message-----
> From:
> richard woody
> [mailto:handi1965@...]
> Sent:
> Sunday, January 29, 2006 5:24
> PM
> To:
> billmyong@...
> Subject:
> Are you in need of
> parts cars?
> Bill, I have 3sedans and 1coupe that I need to get rid
> of,all are for the most part complete, but have been sitting for along time up > here in the northwest, I can take digital photos of the group and e-mail them > if needed! All have clear titles and need to go away!!! I'm asking a $1,000 or > best offer on the group, MUST TAKE ALL, NO PARTS! I can help load if needed!
> contact me @
> handi_man65@...
> if you or
> someone else might be interested! Thanks, Richard, PS, there in the Seattle > area......

Lyle · Post by **Lyle** » Sun Jan 29, 2006 11:26 pm

Hi Colin;
Talking about weird stuff, there is a owner in Canada (see below) that
has the Honda 600 sedan one number up from yours. It's been a while since I
heard from Dean, but he may still be around in B.C. You might want to look
him up. Not often you see two Honda 600's that shared the same assembly
line (one just ahead of the other).
Bill
Bridgeman, Dean 715 Falkirk Rd.Kelowna, B.C. Cn VIX-1P8
1-XXX-XXX-XXXX bridgeman@...
1 Sedan, ANXXX-XXX-XXXX N600E-1028520 10/70

laurie_randall · Post by **laurie_randall** » Tue Jan 31, 2006 6:28 am

Colin:
Good luck with your new car. It is my understanding from Honda Canada
these cars were never sold new in this country. Mine came from California.
When I tried to get parts Honda Canada said they have no parts available. I
was able to get the last oil filter (using the part number)from their
warehouse in BC.Some ignition parts are the same as motor cycle and can be
got thru bike dealers. The best source for parts I have found is Mike
O'Connor in Statesville North Carolina---tmoc1990@... -- a good guy.
Funny about the floors. When I asked Mike about these cars before i
bought mine he said" there are 2 things you wont find. Rusty trunk lids.
They are plastic and rusty floors" He didn't know what Honda made them from.
At that point he had handled over 100 cars .
I took a bunch of photos but sent them to the insurance company. I have
no way to send photos over the net anyway. Sorry. I had my car out yesterday
for a run around town. Don't you love the weather.My car has over 100,000
miles on it now. As far as I know the head is the only thing that has been
replaced .It makes strange noises but runs like a champ. I need to replace
the tires soon. The little beggars don't last long. Mine went only about
12000 miles and I can't find a tire dealer in London who can get me new
ones. They all say they are NLA. O'Connor has them so I guess thats where
I'll shop. I have both a shop and parts books. mike morris London

>From: Colin Kennedy Reply-To:
2cylinderhondas@yahoogroups.com
>To:
2cylinderhondas@yahoogroups.com
>Subject: RE: [2cylinderhondas] Re: Canadian members?
>Date: Sun, 29 Jan 2006 12:40:06 -0800 (PST)
> Hi Mike,
> Well, I did it, I purchased the little N600. It is actually a 1971
>(prod. 10/70)
> VIN number ANXXX-XXX-XXXX. It has only 33,000 miles, original paint
>(whats left of it)
> and although I thought the engine was seized, it in fact rotates
>smoothly with a wrench ont the crank pulley bolt. This one will not be a
>perfect car when I am done with it, I will save the good body job for a
>qualified body shop down the road. Rear seat and ignition switch are
>missing, but that is it.
> Outer rockers are rough, but all other rust is minor and mostly only
>surface, the floors are PERFECT! except for one hole in the drivers floor,
>about 2 inches in diameter.
> It is an original Ontario car, the previous owner purchased it used in
>1974 from Race Motors in Lindsay, Ontario.
> Do you have any pictures of your N600?
> You can email me at my home address:
amy.kennedy@...
> Cheers,
> Colin
>michael morris wrote:
> Thanks Colin. My 71 AN600 is my summer city beater. Starts, stops
>and
>runs quite reliably. Not very pretty but it gets the job done. Now over
>100,000 miles it keeps on ticking. Amazing. mike
> >From: "honda600lover" >Reply-To:
2cylinderhondas@yahoogroups.com
> >To:
2cylinderhondas@yahoogroups.com
> >Subject: [2cylinderhondas] Re: Canadian members?
> >Date: Sat, 28 Jan 2006 16:57:28 -0000
> >Hi Mike,
> >I am Cobourg Ontario, just to the east of Toronto, and am actually on
> >my way out the door to see a 1970 AN600 sedan, condition is rough,
> >but I believe restoratble. This will be my first air cooled Honda,
> >but I also currently own 3 S600's and a 1976 Civic CVCC.
> >I will let you know if I end up pirchasing it.
> >Cheers,
> >Colin
> >--- In
2cylinderhondas@yahoogroups.com
, "Steven Michelsen"
> > wrote:
> > > Look at this, then add your name...
http://www.frappr.com/hondaszn360600carowners
> > > ----- Original Message -----
> > > From: mike morris
> > > To:
2cylinderhondas@yahoogroups.com
> > > Sent: Thursday, December 08, 2005 10:24 AM
> > > Subject: [2cylinderhondas] Canadian members?
> > > Hi
> > > I live in London Ontario Canada. I have and drive a 1971 AN600
> > > sedan. Are there any other members of this group in the south
> >western
> > > Ontario area? mike morris

joelanderson128 · Post by **joelanderson128** » Fri Feb 03, 2006 4:21 am

Hi Mike,
I am going to pick the car up on Sunday, so I will be able to assess it better when it is in my garage.
The tire rack sells 10 inch Kumho's for $29 US each, but I am sure it would much more with duty and shipping. So long as I can get the tire that is on it to hold air long enough to put it on the trailer, I can wait until spring to find some.
I have delt with Mike O'Conner in the past for my S600 parts, he seems to be a very reasonable guy.
Here is a picture of 2 of my S600,s, one is drivable, the other is in restoration (20 years and counting)
Cheers,
Colin michael morris wrote:

> Colin:
>      Good luck with your new car. It is my understanding from Honda > Canada > these cars were never sold new in this country. Mine came from California.
> When I tried to get parts Honda Canada said they have no parts available. I > was able to get the last oil filter (using the part number)from their > warehouse in BC.Some ignition parts are the same as motor cycle and can be > got thru bike dealers. The best source for parts I have found is Mike > O'Connor in Statesville North Carolina---tmoc1990@... -- a good guy.
>     Funny about the floors. When I asked Mike about these cars before i > bought mine he said" there are 2 things you wont find. Rusty trunk lids.
> They are plastic and rusty floors" He didn't know what Honda made them from.
> At that point he had handled over 100 cars .
>     I took a bunch of photos but sent them to the insurance company. I have > no way to send photos over the net anyway. Sorry. I had my car out yesterday > for a run around town. Don't you love the > weather.My car has over 100,000 > miles on it now. As far as I know the head is the only thing that has been > replaced .It makes strange noises but runs like a champ. I need to replace > the tires soon. The little beggars don't last long. Mine went only about > 12000 miles and I can't find a tire dealer in London who can get me new > ones. They all say they are NLA. O'Connor has them so I guess thats where > I'll shop. I have both a shop and parts books.       mike morris London > >From: Colin Kennedy > >Reply-To: 2cylinderhondas@yahoogroups.com > >To: 2cylinderhondas@yahoogroups.com > >Subject: RE: [2cylinderhondas] Re: Canadian members?
> >Date: Sun, 29 Jan 2006 12:40:06 -0800 (PST)
> >   Hi Mike,
> >   Well, I did it, I purchased the little N600. It is actually a 1971 > >(prod. 10/70) > >   VIN number ANXXX-XXX-XXXX. It has > only 33,000 miles, original paint > >(whats left of it) > >   and although I thought the engine was seized, it in fact rotates > >smoothly with a wrench ont the crank pulley bolt. This one will not be a > >perfect car when I am done with it, I will save the good body job for a > >qualified body shop down the road. Rear seat and ignition switch are > >missing, but that is it.
> >   Outer rockers are rough, but all other rust is minor and mostly only > >surface, the floors are PERFECT! except for one hole in the drivers floor, > >about 2 inches in diameter.
> >   It is an original Ontario car, the previous owner purchased it used in > >1974 from Race Motors in Lindsay, Ontario.
> >   Do you have any pictures of your N600?
> >   You can email me at my home address:
> >   amy.kennedy@...
> Cheers,
> >   Colin
> >michael morris wrote:
> >       Thanks Colin. My 71 AN600 is my summer city beater. Starts, stops > >and > >runs quite reliably. Not very pretty but it gets the job done. Now over > >100,000 miles it keeps on ticking. Amazing. mike
> > >From: "honda600lover"
> > >Reply-To: 2cylinderhondas@yahoogroups.com
> > >To: 2cylinderhondas@yahoogroups.com
> > >Subject: [2cylinderhondas] Re: Canadian members?
> > >Date: Sat, 28 Jan 2006 16:57:28 -0000
> > >Hi Mike,
> > >I am Cobourg Ontario, just to the east of Toronto, and am actually on > > >my way out the door to see a 1970 AN600 sedan, condition is rough, > > >but I believe restoratble. This will be my first air cooled Honda, > > >but I also currently own 3 > S600's and a 1976 Civic CVCC.
> > >I will let you know if I end up pirchasing it.
> > >Cheers,
> > >Colin
> > >--- In 2cylinderhondas@yahoogroups.com, "Steven Michelsen" > > > wrote:
> > > > Look at this, then add your name...
> http://www.frappr.com/hondaszn360600carowners
> > > >   ----- Original Message -----
> > > >   From: mike morris
> > > >   To: 2cylinderhondas@yahoogroups.com
> > > >   Sent: Thursday, December 08, 2005 10:24 AM
> > > >   Subject: [2cylinderhondas] Canadian members?
> > > >     Hi
> > > >      I live in London Ontario Canada. I have and drive a 1971 > AN600 > > > >   sedan. Are there any other members of this group in the south > > >western > > > >   Ontario area?                          mike morris