n600 windshield contact number below and was quoted shipped for $400

[a65tigrr]

A 73-79 VW Super Beetle gasket will fit on a N600 windshield and is the same style. I have one for mine but it is not installed in the car, so I cant say 100% for sure it will work. A VW gasket is less than $10, so its worth atry.
Greg howardsugarman@...
wrote:

> Since these Windshield are made almost like the older
> VW Beetles... Can He use the gasket from it and Just
> cut it to size and seal it at the bottom center or
> something??? could this be possible?? might ot have
> the chrome ring around it but hey... Enjoy!
> --- Miles Chappell wrote:
> > Let's say the last good used seal that would be
> > reusable would have
> > been 1985. When I started working on Honda 600's
> > back in 1981, 10
> > years after the seals were new. Doubt you will find
> > a good used seal
> > anymore. Even the car I restored 2 years ago that
> > was parked inside
> > for 20 years with a blown crank had a rotten seal.
> > Bill Colford has
> > the new windshield gaskets.
> > Have a look at the new database I started, it's just
> > under the Links
> > on
> our Home Page. There's a list of interchangeable
> > parts and
> > suppliers designed to help with parts.
> > Miles
> > --- In 2cylinderhondas@yahoogroups.com, "Richard
> > Morris"
> > wrote:
> > > No it won't. But If I was between a rock and a
> > hardspot, Here's
> > what I
> > > would do. I would use lexan in place of the glass.
> > Now before
> > others get
> > > bent out of shape on this, let me say that it is
> > used as
> > windshields in
> > > other areas (airplanes, showcars, motorcycles,
> > etc). The one thing
> > that
> > > will kill a plexiglass or lexan windshield is
> > windshield wipers.
> > You
> > > will need to use Rain-X on it and not use wipers.
> > > Now, I only view this as a temporary solution
> > until you have a
> real
> > > glass windshield show up. (I sure hope your seal
> > is still good).
> > > Richard Morris
> > > -----Original Message-----
> > > From: 2cylinderhondas@yahoogroups.com
> > > [mailto:2cylinderhondas@yahoogroups.com] On Behalf
> > Of mtimion
> > > Sent: Saturday, November 12, 2005 9:30 PM
> > > To: 2cylinderhondas@yahoogroups.com
> > > Subject: [2cylinderhondas] Re: n600 windshield
> > contact number
> > below and
> > > was quoted shipped for $400
> > > Will the z600 windshield fit the n600?  Will any
> > other windshields
> > fit?
> > > --- In 2cylinderhondas@yahoogroups.com, "Richard
> > Morris"
> > > wrote:
> > > > That's awfully steep. Surely
> someone on this
> > list can help you
> > out.
> > > > Richard Morris
> > >   _____

[luckygoatmaster]

I shipped a windshield from a BMW 700 Cuope a few
years ago. We used a bicycle box from a packaging
store and a lot of cushioning around it. It was about
$100 to ship from Seattle to New York. The N600
windshield is smaller with less curve and might be
easier to pack. I bought it because it was a local
auction and I could just pick it up.
No worries about not buying my car. It will sell at
some point.
--- mtimion wrote:

> Hi Paul. Boy is my face red :-S
> I will probably have to wait until I get the car in
> to determine
> exactly what I need in terms of parts. That might
> be another few weeks.
> I'm starting to think I should have purchased your
> car instead of the
> one in Chicago, but what is done is done. I think
> that any car is
> going to take a huge amount of work to get back in
> "good" condition.
> Looks like my gamble on the car in Chicago may make
> it so I have a
> little more work than your car would have given me.
> Such is life.
> I will have a list of needed parts on this website
> as soon as my car
> arrives.
> Just out of curiousity, how would anyone go about
> shipping a
> windshield? It must be extremely expensive to do.
> I wonder if there
> is a "port to port" option for such transactions.
> --- In
2cylinderhondas@yahoogroups.com
, Paul Gerlt
> wrote:
> > Matt,
> > Thats my car you are looking at in Seattle. Yes I
> am
> > willing to part with the windshield. I am also
> looking
> > at 2 more Honda 600's today.
> > Paul
> > --- mtimion wrote:
> > > Any chance you're wanting to part with it? I
> have
> > > yet to do a search
> > > for parts cars in my area, but if I can't find
> > > anything I'm seriously
> > > considering buying another car in Seattle and
> either
> > > using it as a
> > > parts car or mine as a parts car, depending on
> which
> > > one is in better
> > > shape.
> > > --- In
2cylinderhondas@yahoogroups.com
, Paul
> Gerlt
> > > wrote:
> > > > I have a good used N600 windshield...picked it
> up
> > > off
> > > > ebay a couple years ago.
> > > > --- mtimion wrote:
> > Paul
> > 57 Vespa 400
> > 58 Sachsenring P70 Coupe
> > 59 Austin Mini MK1
> > 61 Morris Mini MK1
> > 69 Cony 360 wide
> > 69 Subaru 360 Young (x2)
> > 69 Subaru 360 Van
> > 70 Honda N600
> > 67 Toyoace crew cab firetruck
> > 76 Mazda Chantez
> > 05 MINI Cooper
> > 66 Bridgestone 90 sport (x2)
> > 67 Moto Guzzi Stornello
> Paul

57 Vespa 400
58 Sachsenring P70 Coupe
59 Austin Mini MK1
61 Morris Mini MK1
69 Cony 360 wide
69 Subaru 360 Young (x2)
69 Subaru 360 Van
70 Honda N600
67 Toyoace crew cab firetruck
76 Mazda Chantez
05 MINI Cooper
66 Bridgestone 90 sport (x2)
67 Moto Guzzi Stornello

[bbondiett]

Miles Chappell wrote:

> Let's say the last good used seal that would be reusable would have > been 1985. When I started working on Honda 600's back in 1981, 10 > years after the seals were new. Doubt you will find a good used seal > anymore. Even the car I restored 2 years ago that was parked inside > for 20 years with a blown crank had a rotten seal. Bill Colford has > the new windshield gaskets.
> Have a look at the new database I started, it's just under the Links > on our Home Page. There's a list of interchangeable parts and > suppliers designed to help with parts.
> Miles
> --- In 2cylinderhondas@yahoogroups.com, "Richard Morris"
> wrote:
> > No it won't. But If I was between a rock and a hardspot, Here's > what I > > would do. I would use lexan in place of the glass. Now before > others get > > bent > out of shape on this, let me say that it is used as > windshields in > > other areas (airplanes, showcars, motorcycles, etc). The one thing > that > > will kill a plexiglass or lexan windshield is windshield wipers.
> You
> > will need to use Rain-X on it and not use wipers.
> > Now, I only view this as a temporary solution until you have a real > > glass windshield show up. (I sure hope your seal is still good).
> > Richard Morris
> > -----Original Message-----
> > From: 2cylinderhondas@yahoogroups.com
> > [mailto:2cylinderhondas@yahoogroups.com] On Behalf Of mtimion > > Sent: Saturday, November 12, 2005 9:30 PM > > To: 2cylinderhondas@yahoogroups.com > > Subject: [2cylinderhondas] Re: n600 windshield contact number > below and > > was quoted shipped for $400
> > Will the z600 windshield fit the n600?  Will
> any other windshields
> fit?
> > --- In 2cylinderhondas@yahoogroups.com, "Richard Morris" > > wrote:
> > > That's awfully steep. Surely someone on this list can help you > out.
> > > Richard Morris
> >   _____

Exodus 15:2
Yahoo! FareChase - Search multiple travel sites in one click.

[howardsugarman]

check this site out
http://www.usedpartslive.com/locator/HONDA/600/Body/
--- Mitzie Freeman wrote:

> Miles Chappell wrote:Let's say
> the last good used seal that would be reusable would
> have
> been 1985. When I started working on Honda 600's
> back in 1981, 10
> years after the seals were new. Doubt you will find
> a good used seal
> anymore. Even the car I restored 2 years ago that
> was parked inside
> for 20 years with a blown crank had a rotten seal.
> Bill Colford has
> the new windshield gaskets.
> Have a look at the new database I started, it's just
> under the Links
> on our Home Page. There's a list of interchangeable
> parts and
> suppliers designed to help with parts.
> Miles
> --- In
2cylinderhondas@yahoogroups.com
, "Richard
> Morris"
> wrote:
> > No it won't. But If I was between a rock and a
> hardspot, Here's
> what I
> > would do. I would use lexan in place of the glass.
> Now before
> others get
> > bent out of shape on this, let me say that it is
> used as
> windshields in
> > other areas (airplanes, showcars, motorcycles,
> etc). The one thing
> that
> > will kill a plexiglass or lexan windshield is
> windshield wipers.
> You
> > will need to use Rain-X on it and not use wipers.
> > Now, I only view this as a temporary solution
> until you have a real
> > glass windshield show up. (I sure hope your seal
> is still good).
> > Richard Morris
> > -----Original Message-----
> > From:
2cylinderhondas@yahoogroups.com
> > [mailto:
2cylinderhondas@yahoogroups.com
] On Behalf
> Of mtimion
> > Sent: Saturday, November 12, 2005 9:30 PM
> > To:
2cylinderhondas@yahoogroups.com
> > Subject: [2cylinderhondas] Re: n600 windshield
> contact number
> below and
> > was quoted shipped for $400
> > Will the z600 windshield fit the n600? Will any
> other windshields
> fit?
> > --- In
2cylinderhondas@yahoogroups.com
, "Richard
> Morris"
> > wrote:
> > > That's awfully steep. Surely someone on this
> list can help you
> out.
> > > Richard Morris
> > _____

Start your day with Yahoo! - Make it your home page!
http://www.yahoo.com/r/hs

[stevenmichelsen2]

Dear Mitzie,
I am sorry, but until you determine the correct way to unsubscribe from this list, you are hereby doomed to read our ramblings about our little cars indefinately! Asking all 484 of us, no matter how politely, is not how it's done.
Good luck,
Steve

[Lyle]

If you look at the cross cut of a VW windshield seal and a Honda 600 seal you will see the difference.  They are a whole different seal.  The VW seal is wider across the outer sealing edge.
Bill

> -----Original Message-----
> From:
> 2cylinderhondas@yahoogroups.com [mailto:2cylinderhondas@yahoogroups.com] > On > Behalf Of > Greg Sikes > Sent:
> Sunday, November 13, 2005 4:08
> PM
> To:
> 2cylinderhondas@yahoogroups.com
> Subject:
> Re:
> [2cylinderhondas] windshield seals
> A 73-79 VW Super Beetle gasket will fit on a N600 windshield and is > the same style. I have one for mine but it is not installed in the car, so I > cant say 100% for sure it will work. A VW gasket is less than $10, so its > worth atry.
> Greg
> howardsugarman@...
> wrote:
> > Since
> > these Windshield are made almost like the older
> > VW Beetles... Can He use
> > the gasket from it and Just
> > cut it to size and seal it at the bottom
> > center or
> > something??? could this be possible?? might ot have
> > the
> > chrome ring around it but hey... Enjoy!
> > --- Miles Chappell
> > wrote:
> > > Let's say the last good used
> > seal that would be
> > > reusable would have
> > > been 1985. When I
> > started working on Honda 600's
> > > back in 1981, 10
> > > years after
> > the seals were new. Doubt you will find
> > > a good used seal
> > anymore. Even the car I restored 2 years ago that
> > > was parked inside
> > > for 20 years with a blown crank had a rotten seal.
> > > Bill
> > Colford has
> > > the new windshield gaskets.
> > > Have a
> > look at the new database I started, it's just
> > > under the Links
> > > on our Home Page. There's a list of interchangeable
> > > parts
> > and
> > > suppliers designed to help with parts.
> > Miles
> > > --- In
> > 2cylinderhondas@yahoogroups.com, "Richard
> > > Morris"
> > wrote:
> > > > No it won't.
> > But If I was between a rock and a
> > > hardspot, Here's
> > > what
> > I
> > > > would do. I would use lexan in place of the glass.
> > Now before
> > > others get
> > > > bent out of shape on this, let
> > me say that it is
> > > used as
> > > windshields in
> > > > other
> > areas (airplanes, showcars, motorcycles,
> > > etc). The one thing
> > > that
> > > > will kill a plexiglass or lexan windshield
> > is
> > > windshield wipers.
> > > You
> > > > will need to use
> > Rain-X on it and not use wipers.
> > > > Now, I
> > only view this as a temporary solution
> > > until you have a real
> > > glass windshield show up. (I sure hope your seal
> > > is still
> > good).
> > > > Richard
> > Morris
> > -----Original Message-----
> > > > From:
> > 2cylinderhondas@yahoogroups.com
> > [mailto:2cylinderhondas@yahoogroups.com] On Behalf
> > > Of
> > mtimion
> > > > Sent: Saturday, November 12, 2005 9:30 PM
> > To: 2cylinderhondas@yahoogroups.com
> > > > Subject: [2cylinderhondas]
> > Re: n600 windshield
> > > contact number
> > > below and
> > was quoted shipped for $400
> > > > Will
> > the z600 windshield fit the n600?  Will any
> > > other windshields
> > > fit?
> > > > --- In
> > 2cylinderhondas@yahoogroups.com, "Richard
> > > Morris"
> > wrote:
> > That's awfully steep. Surely someone on this
> > > list can help you
> > > out.
> > > Richard Morris
> > _____

[Lyle]

when I have to send a windshield to someone, I go to the local PPG warehouse
and get a windshield box from them. I have not had one break yet, and cut
down so it will make it through USPS parcel post.

[honda600js]

Hey everyone. I have a 71 sedan im parting out. its rusty and interior is shot. (smells like dead animals) nasty. if anyone needs anything I will help as best I can just ask. I'm located in milwaukee so most things will have to be shiped because I know of only a handful of theses beauties here in all of Wisconsin. thanks all and HAPPY THANKSGIVING!!!!!!!!!!!!!!!!!!! James

[laurie_randall]

James:
I own and drive one of the very few AN600s in Canada. They were not
sold here at all. My car is a '71 with over 100,000 miles on it. It was an
original California car.
Over time some of the parts were lost -removed if not needed to keep
it going. I'd like to get it back closer to original. I need:
The heater heat exchange box (I have all the other heater parts)
A dome light
The fresh air vent interior door on the right kick panel
A correct headlight switch
the fuel fill door (mine is rusted thru)
A pair of tail light lenses ( mine were painted red) I have found
a way to reglass the red lense and only need 2 lenses that are not broken
Please advise avauilability and cost. thank you in advance. mike
morris Ontario Canada

>From:
honda600js@...
>Reply-To:
2cylinderhondas@yahoogroups.com
>To:
2cylinderhondas@yahoogroups.com
>Subject: Re: [2cylinderhondas] n600 windshield contact number below and was
>quoted shipped for $400
>Date: Mon, 21 Nov 2005 19:29:20 -0500
>Hey everyone. I have a 71 sedan im parting out. its rusty and interior is
>shot. (smells like dead animals) nasty. if anyone needs anything I will
>help as best I can just ask. I'm located in milwaukee so most things will
>have to be shiped because I know of only a handful of theses beauties here
>in all of Wisconsin. thanks all and HAPPY THANKSGIVING!!!!!!!!!!!!!!!!!!!
>James
>-----Original Message-----
>From: Richard Morris To:
2cylinderhondas@yahoogroups.com
>Sent: Sat, 12 Nov 2005 18:30:14 -0600
>Subject: RE: [2cylinderhondas] n600 windshield contact number below and was
>quoted shipped for $400
>That's awfully steep. Surely someone on this list can help you out.
>Richard Morris
>-----Original Message-----
>From:
2cylinderhondas@yahoogroups.com
>[mailto:
2cylinderhondas@yahoogroups.com
] On Behalf Of
howardsugarman@...
>Sent: Saturday, November 12, 2005 5:55 PM
>To:
2cylinderhondas@yahoogroups.com
>Subject: [2cylinderhondas] n600 windshield contact number below and was
>quoted shipped for $400
>Thank you for your email quote request. The price for
>the requested
>part
>for your vehicle is $400.00 shipped. I do not have a
>location close to
>you
>that has that windshield in stock. If you would like
>to place an order
>for
>this part, please call XXX-XXX-XXXX. Tell the customer
>service rep. you
>received the quote from Auto Glass Masters USA and
>they can assist you
>from
>there.
>Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
>SPONSORED LINKS Honda part Felton ca Po box

[honda600js]

Thank you for your interest in the items you need. I will look this weekend and see if I have these things and make sure they are in good working order. ill know more on Sunday . thank you.