Re: 2 carb 600 head

[Chaoui]

Can I found this head to sale somewhere?
Thanks.
Chaoui.

> ----- Original Message -----
> From:
> william
> colford
> To:
> anzhonda600owners@yahoogroups.com
> ;
> 2cylinderhondas@yahoogroups.com
> Sent:
> Monday, July 14, 2003 8:00 AM
> Subject:
> [2cylinderhondas] 2 carb 600
> head
> Maybe not.
> Some time back one of the Honda 600
> owners sent me a few pictures of their 2
> carb cylinder head which was
> supposed to fit a Honda 600.
> Well, attached is the under side of the
> cylinder head, and another picture
> of a Honda 600 head gasket.  Is it
> me, or does this seem like the wrong part
> to the
> puzzle?
> Bill
> To
> unsubscribe from this group, send an email to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .

[H600]

well i expanded my computer screen to match my spare 600 head gasket to the 360 head the two won't work bolt pattern is off

> ----- Original Message -----
> From:
> william
> colford
> To:
> anzhonda600owners@yahoogroups.com
> ;
> 2cylinderhondas@yahoogroups.com
> Sent:
> Monday, July 14, 2003 12:00
> AM
> Subject:
> [2cylinderhondas] 2 carb 600
> head
> Maybe not.
> Some time back one of the Honda 600
> owners sent me a few pictures of their 2
> carb cylinder head which was
> supposed to fit a Honda 600.
> Well, attached is the under side of the
> cylinder head, and another picture
> of a Honda 600 head gasket.  Is it
> me, or does this seem like the wrong part
> to the
> puzzle?
> Bill
> To
> unsubscribe from this group, send an email to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .

[dealadayray]

Hi H600;
    You had the cylinders for it too, right?
Bill

> ----- Original Message -----
> From:
> H600
> To:
> 2cylinderhondas@yahoogroups.com
> Sent:
> Monday, July 14, 2003 6:18 PM
> Subject:
> Re: [2cylinderhondas] 2 carb 600
> head
> well i expanded my computer screen to match my spare 600
> head gasket to the 360 head the two won't work bolt pattern is > off
> > ----- Original Message -----
> > From:
> > william colford
> > To:
> > anzhonda600owners@yahoogroups.com
> > ;
> > 2cylinderhondas@yahoogroups.com
> > Sent:
> > Monday, July 14, 2003 12:00
> > AM
> > Subject:
> > [2cylinderhondas] 2 carb 600
> > head
> > Maybe not.
> > Some time back one of the Honda 600
> > owners sent me a few pictures of their 2
> > carb cylinder head which was
> > supposed to fit a Honda 600.
> > Well, attached is the under side of the
> > cylinder head, and another picture
> > of a Honda 600 head gasket.  Is
> > it me, or does this seem like the wrong part
> > to the
> > puzzle?
> > Bill
> > To unsubscribe from this group,
> > send an email to:
> > 2cylinderhondas-unsubscribe@yahoogroups.com
> > Your
> > use of Yahoo! Groups is subject to the
> > Yahoo! Terms of Service
> > .
> To
> unsubscribe from this group, send an email
> to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .

[H600]

i have never touched a 360 car or parts of one, but from the earlier photo's the upper case halve of a 600 would not let a 360 cylinder or head bolt down maybe with some machine work. but all i am looking at is the photo's,and looks like the studs on lower case 600 appears not to line up to a 360 cylinder or head. if a person could get it to work the 360 cylinder and head to work he or she would lose a lot of cc and torque.after i saw the photo's of these dual carbs years ago i am surprised that no one has made a adapter to bolt to 600 head to receive two 600 carbs. i guess the idea is to make it look like a 360 but a have 600 cc.if i were and i wasn't planning on it i would build a adapter out of modeling clay first cause a block of aluminum is not cheap. if there is going to be welding done on head it should be claped or bolted to at least one inch of flat steel keep from warping head and weld short timeings.I have a old 17 in monitor and blow up the bottom side of 360 head and take a 600 head gasket and see if u can get the stud holes to line up maybe it just my computer well time for me too sleep i work the midnight shift

> ----- Original Message -----
> From:
> william
> colford
> To:
> 2cylinderhondas@yahoogroups.com
> ;
> anzhonda600owners@yahoogroups.com
> Sent:
> Monday, July 14, 2003 9:56 PM
> Subject:
> Re: [2cylinderhondas] 2 carb 600
> head
> Hi H600;
>     You had the cylinders for it too,
> right?
> Bill
> > ----- Original Message -----
> > From:
> > H600
> > To:
> > 2cylinderhondas@yahoogroups.com
> > Sent:
> > Monday, July 14, 2003 6:18
> > PM
> > Subject:
> > Re: [2cylinderhondas] 2 carb
> > 600 head
> > well i expanded my computer screen to match my spare 600 > > head gasket to the 360 head the two won't work bolt pattern is > > off
> > > ----- Original Message -----
> > > From:
> > > william colford
> > > To:
> > > anzhonda600owners@yahoogroups.com
> > > ;
> > > 2cylinderhondas@yahoogroups.com
> > > Sent:
> > > Monday, July 14, 2003 12:00
> > > AM
> > > Subject:
> > > [2cylinderhondas] 2 carb 600
> > > head
> > > Maybe not.
> > > Some time back one of the Honda 600
> > > owners sent me a few pictures of their 2
> > > carb cylinder head which was
> > > supposed to fit a Honda 600.
> > > Well, attached is the under side of
> > > the cylinder head, and another picture
> > > of a Honda 600 head
> > > gasket.  Is it me, or does this seem like the wrong part > > > to the > > > puzzle?
> > > Bill
> > > To unsubscribe from this
> > > group, send an email to:
> > > 2cylinderhondas-unsubscribe@yahoogroups.com
> > > Your
> > > use of Yahoo! Groups is subject to the
> > > Yahoo! Terms of Service
> > > .
> > To unsubscribe from this group, send an email
> > to:
> > 2cylinderhondas-unsubscribe@yahoogroups.com
> > Your
> > use of Yahoo! Groups is subject to the
> > Yahoo! Terms of Service
> > .
> To
> unsubscribe from this group, send an email
> to:
> 2cylinderhondas-unsubscribe@yahoogroups.com
> Your
> use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service
> .