Re: [2cylinderhondas] Need non rusted coupe gas tank

Bill · Post by **Bill** » Fri Apr 19, 2019 7:42 am

Attachments :

oilpump-rod.jpg

Broken Oilpump rod.jpg

Richard; lots of work when the original cam end bearings work very well to over 8 thousand RPM’s. It’s the oil pump not getting oil to the cam that causes the problems. Miles Chappell made a cold rolled steel oil pump rod and I had the eccentric on the hub running the oil pump. I is a bullet proof upgrade that will work on every N or Z 600 oil pump. Sleeve the hub and wear is removed, and steel rod (shown in the second pic) will never break. But even if you Line Bore https://ceomachining.com/what-is-line-boring/ and put bearings in the cam box ends will not stop catastrophic damaged caused by lack of oil to the cam box. Bill From: 2cylinderhondas@yahoogroups.com [mailto: 2cylinderhondas@yahoogroups.com ]
Sent: Friday, April 19, 2019 10:50 AM
To: 2cylinderhondas@yahoogroups.com
Subject: Re: [2cylinderhondas] Need non rusted coupe gas tank
If you can send me a personal email with cost and shipping (and condition of inside of tank) we can hopefully get with each other on it. Thanks, Richard Tgm_enterprizes@... Sent from my iPhone
On Apr 19, 2019, at 10:37 AM, dusty path dustyspath@... [2cylinderhondas] wrote:

hello I may have one good gas tank its still in the old car i have to go look see how bad it is but i do know its still got gas in it I will look today its never been out of car but only one On Friday, April 19, 2019, 3:42:01 AM EDT, tgm_enterprizes@... [2cylinderhondas] wrote:
If anyone has a good coupe gas tank that they can let go of without breaking my bank account (plus whatever “reasonable” shipping) please shoot me an email. (I could actually use 2 if you have them).
Thanks,
Richard Morris
tgm_enterprizes@...