Page 1 of 1
Re: [2cylinderhondas] Seat belt tensioners
Posted: Wed Aug 28, 2013 3:43 pm
by Bill
I like spray silicone. WD will work,but it collects dust. Pull the belt assembly and pull it all the way out on the real, then use the spray silicone liberally and cycle the belt back in several times. If there is any wear or damage that will have to be straightened. Otherwise it should work fine. Bill
From: 2cylinderhondas@yahoogroups.com [mailto:
2cylinderhondas@yahoogroups.com]
On Behalf Of bobs600honda
Sent: Wednesday, August 28, 2013 5:57 AM
To: 2cylinderhondas@yahoogroups.com
Subject: [2cylinderhondas] Seat belt tensioners
Any trick to getting the front seat belts to retract full? Oil / graphite / grease?
Thanks for any suggestions,
Bob
Re: [2cylinderhondas] Seat belt tensioners
Posted: Wed Aug 28, 2013 10:41 pm
by Robert James
Thanks, will give it a shot.
Bob
On Wed, Aug 28, 2013 at 10:43 PM, Bill wrote:
I like spray silicone. WD will work,but it collects dust. Pull the belt assembly and pull it all the way out on the real, then use the spray silicone liberally and cycle the belt back in several times. If there is any wear or damage that will have to be straightened. Otherwise it should work fine. Bill
From: 2cylinderhondas@yahoogroups.com [mailto:
2cylinderhondas@yahoogroups.com]
On Behalf Of bobs600honda
Sent: Wednesday, August 28, 2013 5:57 AM
To: 2cylinderhondas@yahoogroups.com
Subject: [2cylinderhondas] Seat belt tensioners
Any trick to getting the front seat belts to retract full? Oil / graphite / grease?
Thanks for any suggestions,
Bob
Re: [2cylinderhondas] Seat belt tensioners
Posted: Sat Aug 31, 2013 11:33 am
by Robert James
Silicone spray did the trick.
But, what's up with yahoo site new format? Cannot figure out how to search messages. Maybe because I am using the wife's ipad.
On Wednesday, August 28, 2013, Bill wrote:
I like spray silicone. WD will work,but it collects dust. Pull the belt assembly and pull it all the way out on the real, then use the spray silicone liberally and cycle the belt back in several times. If there is any wear or damage that will have to be straightened. Otherwise it should work fine. Bill
From: 2cylinderhondas@yahoogroups.com [mailto:
2cylinderhondas@yahoogroups.com]
On Behalf Of bobs600honda
Sent: Wednesday, August 28, 2013 5:57 AM
To: 2cylinderhondas@yahoogroups.com
Subject: [2cylinderhondas] Seat belt tensioners
Any trick to getting the front seat belts to retract full? Oil / graphite / grease?
Thanks for any suggestions,
Bob