Need two AZ600 front brake rotors, pads, and rear shoes

[tmruwart]

Anyone have new brake rotors, pads, and rear shoes?
Thanks

[friend]

I believe Mike or Miles has front pads, and you can have your rear shoes
relined. As for the roters, unless the front pads you had had rivets to
hold the material in place and the rivets gouged the heck out of your
disc's, I use a 80 grit disc on a hand held grinder and just smooth them out
a touch. Then put them back on.
Bill

[PetePotenza]

I have rotors not new but in good
  shape

[howardsugarman]

Rear shoes are the same as honda cvcc and still
available in some store like napa
--- billmyong@... wrote:

> I believe Mike or Miles has front pads, and you can
> have your rear shoes
> relined. As for the roters, unless the front pads
> you had had rivets to
> hold the material in place and the rivets gouged the
> heck out of your
> disc's, I use a 80 grit disc on a hand held grinder
> and just smooth them out
> a touch. Then put them back on.
> Bill
> -----Original Message-----
> From:
anzhonda600owners@yahoogroups.com
> [mailto:
anzhonda600owners@yahoogroups.com
]On Behalf
> Of tmruwart
> Sent: Saturday, June 03, 2006 11:44 PM
> To:
anzhonda600owners@yahoogroups.com
> Subject: [anzhonda600owners] Need two AZ600 front
> brake rotors, pads,
> and rear shoes
> Anyone have new brake rotors, pads, and rear shoes?
> Thanks

Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[friend]

NO, the brake shoes for a Honda 600 are not the same as a CVCC.
Bill

> -----Original Message-----
> From:
> anzhonda600owners@yahoogroups.com
> [mailto:anzhonda600owners@yahoogroups.com]
> On Behalf Of
> howardsugarman@...
> Sent:
> Wednesday, June 07, 2006 4:18
> PM
> To:
> anzhonda600owners@yahoogroups.com
> Subject:
> RE:
> [anzhonda600owners] Need two AZ600 front brake rotors, pads, and rear > shoes
> Rear shoes are the same as honda cvcc and still
> available in some store
> like napa
> ---
> billmyong@earthlink .net
> wrote:
> > I believe Mike or Miles has front pads, and you can
> have your rear shoes
> > relined. As for the roters, unless the front
> pads
> > you had had rivets to
> > hold the material in place and the
> rivets gouged the
> > heck out of your
> > disc's, I use a 80 grit
> disc on a hand held grinder
> > and just smooth them out
> > a touch.
> Then put them back on.
> > Bill
> > -----Original
> Message-----
> > From:
> anzhonda600owners@ yahoogroups. com
> [mailto:
> anzhonda600owners@ yahoogroups. com
> ]On
> Behalf
> > Of tmruwart
> > Sent: Saturday, June 03, 2006 11:44
> PM
> > To:
> anzhonda600owners@ yahoogroups. com
> Subject: [anzhonda600owners] Need two AZ600 front
> > brake rotors,
> pads,
> > and rear shoes
> > Anyone have new brake
> rotors, pads, and rear shoes?
> > Thanks
> > Yahoo! Groups
> Links
> ____________ _________ _________ _________ _________ __
> Do
> You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail. yahoo.com

[airplanejohnny2003]

--- In anzhonda600owners@yahoogroups.com, "tmruwart"
wrote:

> Anyone have new brake rotors, pads, and rear shoes?
> Thanks

Hi, I have a set of brake pads but am not sure if they are for a 600
series or a cvc1200 i also used to have.
On one set the the number is: 43152-568-303 (honda part)the other set
looks to be slightly different on one end than the honda labeled part.
If needed I could send pics. Thanks, John