Wiper Stud Assembly

Archived posts from the 2 Cylinder Hondas Yahoo Group
Post Reply
Brian Bates
Posts: 8
Joined: Sat Feb 22, 2014 12:48 am

Wiper Stud Assembly

Post by Brian Bates »

Finally assembling my 72 AZ600 after no attention for years.
What is the correct order of parts that go on the wiper studs? I simply cannot remember anymore and want to get it right.
Photos would be great! Thanks!
Attachments
image1-16246.JPG
image1-16246(1).JPG
art Remai
Posts: 40
Joined: Thu Jul 14, 2016 4:31 am

Re: Wiper Stud Assembly [1 Attachment]

Post by art Remai »

You can always go to the Honda estore, or Majestic Hondas website and look at the diagram there Sent from my iPhone
On Jul 4, 2018, at 7:40 AM, Brian Bates
bates.brian@...
[2cylinderhondas] wrote:
Finally assembling my 72 AZ600 after no attention for years.
What is the correct order of parts that go on the wiper studs? I simply cannot remember anymore and want to get it right.
Photos would be great! Thanks!
Brian D. Bates, PSS, CST
WDNR Assured Wetland Delineator
Bates Soil & Water Testing Services
XXX-XXX-XXXX
Sent from my iPhone
feltonminicycle
Posts: 352
Joined: Mon Apr 14, 2003 2:50 pm

Re: Wiper Stud Assembly

Post by feltonminicycle »

I just took apart the ones on my Sedan. The cowl vent goes on first (coupe) then rubber gasket then stainless bezel then nut then rubber boot.
Miles
dusty path
Posts: 47
Joined: Tue Nov 08, 2016 1:41 am

Re: Wiper Stud Assembly

Post by dusty path »

go here u can down load it  to your  phone or PC  or  just  wait  for it to load Honda 600 Coupe and Sedan Manuals, Bulletins, Advertisements
Honda 600 Coupe and Sedan Manuals, Bulletins, Advertisements If you own a Honda 600 Coupe or Sedan, here you will find virtually every manual, catalog and techni...
On Thursday, July 5, 2018, 2:39:24 AM MST, z600miles@... [2cylinderhondas] wrote:
I just took apart the ones on my Sedan. The cowl vent goes on first (coupe) then rubber gasket then stainless bezel then nut then rubber boot.
Miles
Brian Bates
Posts: 8
Joined: Sat Feb 22, 2014 12:48 am

Re: Wiper Stud Assembly

Post by Brian Bates »

Thank you to all that replied here or by email.
Brian D. Bates, PSS, CST
WDNR Assured Wetland Delineator
Bates Soil & Water Testing Services
XXX-XXX-XXXX
Sent from my iPhone
dusty path
Posts: 47
Joined: Tue Nov 08, 2016 1:41 am

Re: Wiper Stud Assembly

Post by dusty path »

Brian Bates whats wrong with the wiper  studs  u can clean them  i oiled and greased mine work  good  now  use  grease to keep in the oil I put in them and I live in AZ  one hot state  but also works good  and I used a bearing  grease that dont wash  off  red  in color  never seen the studs  go bad unless  u broke  them ??
On Saturday, July 7, 2018, 9:54:04 AM MST, Brian Bates bates.brian@... [2cylinderhondas] wrote:
Thank you to all that replied here or by email.
Brian D. Bates, PSS, CST
WDNR Assured Wetland Delineator
Bates Soil & Water Testing Services
XXX-XXX-XXXX
Sent from my iPhone
Post Reply