Brake line and fitting sizes?

dusty path · Post by **dusty path** » Wed May 17, 2017 6:14 am

you can buy new and the lines also any auto store will sell the lines and nuts and yes I think there 10mm x 1.25. single flare as u can buy new lots of Honda cars use this type line but u will need a pipe bender don't cost a lot its a small tool here is a link to the manual and parts list Honda 600 Coupe and Sedan Manuals, Bulletins, Advertisements
Honda 600 Coupe and Sedan Manuals, Bulletins, Advertisements
If you own a Honda 600 Coupe or Sedan, here you will find virtually every manual, catalog and techni...
On Tuesday, May 16, 2017 11:24 AM, "Chuck Dean cadean329@... [2cylinderhondas]" wrote:
I did a quick eBay search and found these:
http://www.ebay.com/itm/HONDA- 600-COUPE-SEDAN-2-BRAKE-LINE- NUTS-FITTING-N600-Z600-BRAKES- MASTER-/381957290987?hash= item58ee6dbbeb:g: ZmoAAOSwcu5UQpKN&vxp=mtr I have bought from the seller before, he sells good used parts.
Chuck Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe

On Tue, May 16, 2017 at 8:16 AM,
jayson_allen@...
[2cylinderhondas]
Newbie with a '71 AN600. My brake hard lines are pretty rough and many fitting nuts are rounded. Is it standard 3/16 line and 10mmx1.0 fittings? Any thoughts on line material? I see zinc steel and copper nickel options.
> For example:
> http://a.co/1F32pwe
> Anything else I need to know... will a standard flaring tool work?
> Thanks for your guidance!
> Jayson
> San Jose, CA

dusty path · Post by **dusty path** » Wed May 17, 2017 6:21 am

On Tuesday, May 16, 2017 2:26 PM, "Chuck Dean cadean329@... [2cylinderhondas]" wrote:
It should be a double flare.
Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe On May 16, 2017, at 2:08 PM, jayson_allen@...
[2cylinderhondas] Thanks Chuck. I went ahead and ordered those.
> Looking at my lines, it appears to be a single flare. Is that correct or should it be a double?
[/quote]

Jayson Allen · Post by **Jayson Allen** » Wed May 17, 2017 6:54 pm

Thanks! Since there are two answers on the flare, can anyone else confirm if it is a single or double flare? All my current rear lines look to be single flare. Does it matter?
Thanks,
Jayson

Bill · Post by **Bill** » Wed May 17, 2017 8:03 pm

The double flair is the way to go, the single flair tends to crack.
Bill

Lyle Trudell · Post by **Lyle Trudell** » Thu May 18, 2017 10:26 am

double

club_hondafr · Post by **club_hondafr** » Thu May 18, 2017 10:37 am

Thanks all. Double it will be.

On May 18, 2017, at 10:20, Lyle Trudell
craft59@...
[2cylinderhondas] wrote:
double

Chuck Dean · Post by **Chuck Dean** » Thu May 18, 2017 12:31 pm

Good choice! And after you learn how to do them, you can put it on your resume that you can do double flair's!
Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe

On May 18, 2017, at 10:37 AM, Jayson Allen
jayson_allen@...
[2cylinderhondas] wrote:
Thanks all. Double it will be.
On May 18, 2017, at 10:20, Lyle Trudell
craft59@...
[2cylinderhondas] wrote:
> double
> -----Original Message-----
> From:
> jayson_allen@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups.com
> To: 2cylinderhondas 2cylinderhondas@yahoogroups.com
> Sent: Wed, May 17, 2017 9:54 pm
> Subject: [2cylinderhondas] Re: Brake line and fitting sizes?
> Thanks! Since there are two answers on the flare, can anyone else confirm if it is a single or double flare? All my current rear lines look to be single flare. Does it matter?
> Thanks,
> Jayson

Bill · Post by **Bill** » Thu May 18, 2017 6:33 pm

Or, you can go to Classic tube http://www.classictube.com/index.php
and they will make them for you.

club_hondafr · Post by **club_hondafr** » Sat May 20, 2017 12:53 pm

Making progress today. Thanks for all the guidance.

On May 18, 2017, at 18:33, 'Bill'
billmyong@...
[2cylinderhondas] wrote:
Or, you can go to Classic tube
http://www.classictube.com/index.php
and they will make them for you.
From:
2cylinderhondas@yahoogroups.com
[mailto:
2cylinderhondas@yahoogroups.com
]
Sent:
Thursday, May 18, 2017 12:25
PM
To:
2cylinderhondas@yahoogroups.com
Subject:
Re: [2cylinderhondas] Re:
Brake line and fitting sizes?
Good choice! And after
you learn how to do them, you can put it on your resume that you can do double flair's!
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
On May 18, 2017, at 10:37 AM, Jayson Allen
jayson_allen@...
[2cylinderhondas] Thanks all. Double it will be.
> On May 18, 2017, at 10:20, Lyle Trudell
> craft59@...
> [2cylinderhondas] 2cylinderhondas@yahoogroups.com
> wrote:
> > double
> > -----Original
> > Message-----
> > From:
> > jayson_allen@...
> > [2cylinderhondas] > 2cylinderhondas@yahoogroups.com
> > To: 2cylinderhondas > 2cylinderhondas@yahoogroups.com
> > Sent: Wed, May 17, 2017 9:54 pm
> > Subject: [2cylinderhondas] Re: Brake line and fitting sizes?
> > Thanks! Since there are two answers on the flare, can anyone else confirm if it > > is a single or double flare? All my current rear lines look to be single flare.
> > Does it matter?
> > Thanks,
> > Jayson

Note: 4 image(s) originally linked in this post are no longer available (cid:6D4EF74C-B377-464A-BB45-9985D4A782D2, cid:50E9E682-2CE3-4225-BA8E-8E7DEDCEFED8, cid:D2BFD9EB-BE20-4EA1-BBEE-358122591E2B +1 more).