need a couple parts...

[tjmallen]

Need a couple parts for a '72 sedan....looking for a windshield, as well as a driver's side door skin. Can anyone out there help?  Thanks in advance!
Tom Allen, Fort Collins, CO

[Rick Larson]

I have parts for a 1970 coup.
On Monday, February 6, 2017 7:51 AM, "tjmallen@... [2cylinderhondas]" wrote:
Need a couple parts for a '72 sedan....looking for a windshield, as well as a driver's side door skin. Can anyone out there help?  Thanks in advance!
Tom Allen, Fort Collins, CO

[tjmallen]

Thanks...looks like both parts are different by model at least the door.  Windshield parts #s are different as well, unless anyone knows if they may actually be the same?
I have parts for a 1970 coup.
On Monday, February 6, 2017 7:51 AM, "tjmallen@... [2cylinderhondas]" wrote:
Need a couple parts for a '72 sedan....looking for a windshield, as well as a driver's side door skin. Can anyone out there help?  Thanks in advance!
Tom Allen, Fort Collins, CO

[Bill]

There are two different cars, the Honda 600 Z Coupe was manufactured from April 1971 through August 1972.  The Honda 600 Sedan was manufactured for US market from Jan.1969 through Aug.
1972.  The windshield is different.  The body on these two vehicles is different.
Go to the URL below for Parts manuals of both cars.
http://www.honda600coupe.com/Manuals,_b ... ments.html

[tjmallen]

Thanks...that's the link I use, just thought I'd see if there was something that wasn't there that would be helpful.
There are two different cars, the Honda 600 Z Coupe was manufactured from April 1971 through August 1972.  The Honda 600 Sedan was manufactured for US market from Jan.1969 through Aug.
1972.  The windshield is different.  The body on these two vehicles is different.
Go to the URL below for Parts manuals of both cars.
http://www.honda600coupe.com/Manuals,_b ... ments.html

[Bill]

Nothing body wise, the Coupe is narrower by 3 inches so even the axels are different as are the tie rod shafts.  This is why the parts manual is so useful.

[dereks600]

Tom, I might have a windshield, I will check to see if it is coupe or sedan.  I have quite a few sedan parts that need a new home, but not a door skin. I did a sedan a while back, now working on a coupe.  I'm down in Golden, feel free to contact me smog57@....

[Steve]

The part number for an aftermarket windshield is FCW 313 for sedan, for coupe it's FCW 312. Some years ago we had 15? windshields made in SoCal, I don't remember who headed up the project? Bill maybe? I bought 2, 1 for me and 1 for a job. I bet if you can get another order together they would make another run. I think they cost between $300 & $450ea.
Miles

[Bill]

Yea, I sourced the shop and made some connections, but the guy at  Douglas Glass davepdouglass@...
, the total was 13 sedan windshields.  Shipping was extra but we worked with the shop.  You have to bend these people over the number of windshields you can get made at one time.
Bill

[dusty path]

I would be up for a  windshield for n600 1972  as I like a spare  as I need to replace the rubber  and  if mine gets broke Im out of luck   but if u have one let me know   but I am in AZ  so  if your in cali  I can come get it  thanks
On Monday, February 6, 2017 7:33 PM, "smog57@... [2cylinderhondas]" wrote:
Tom, I might have a windshield, I will check to see if it is coupe or sedan.  I have quite a few sedan parts that need a new home, but not a door skin. I did a sedan a while back, now working on a coupe.  I'm down in Golden, feel free to contact me smog57@....