Rings Z600 Standar

Toni Perez · Post by **Toni Perez** » Wed Oct 15, 2014 8:27 am

El vendedor en ebay no indica el gasto de envio a Espa�a. Ebay no me deja comprar.
He tratado de ponerme en contacto con �l y no hay respuesta. Necesito que alguien de ah� lo compre por mi.
The seller in ebay doesn't say me how much I have to pay to send it to me to spain.
Ebay doesn't allow me to buy.
I have tried to contact with him but he doesn't answer me. I need that somebody buy it for me und I pay him without problems.
El Mi�rcoles, 15 de octubre, 2014 13:47:06, "artremai artremai@... [2cylinderhondas]" escribi�:
I did place an order a while back, got the wrong item, emailed him, then received the correct part. Never got a response to my email though, I thought it was odd that he never replied.
Last thing I ordered was the drive chains and they showed up.
Maybe someone is managing the site and his emails for him? (Shrug).
Is he part of this group?
Sent from my T-Mobile 4G LTE Device -------- Original message -------- From: "mgpstearns mgpstearns@... [2cylinderhondas]" 2cylinderhondas@yahoogroups.com> Date:10/15/2014 4:15 AM (GMT-08:00) To: 2cylinderhondas@yahoogroups.com Subject: [2cylinderhondas] Re: Rings Z600 Standar
Dont try to use honda600carparts.com he has dissapeared. You will send payment and will gwt no reply. Several of us have tried to contact Bruce by email and telephone with no luck. Im assuming the Z uses 74mm rings like the N. If so Ray Cave on ebay is your only hope right now. I dont think anyone else has any. Believe me I tried and just received mine from Ray yesterday.

Scott Walters · Post by **Scott Walters** » Wed Oct 15, 2014 10:06 am

That even says that standard size is out of stock. =P
-s

On 0, "Alan Stanyon
alanstanyon@...
[2cylinderhondas]" wrote:
> Try Here
http://www.cmsnl.com/honda-n600-sedan-1 ... tmlRegards Alan
> To:
2cylinderhondas@yahoogroups.com
> From:
2cylinderhondas@yahoogroups.com
> Date: Wed, 15 Oct 2014 06:16:36 +0000
> Subject: RE: [2cylinderhondas] Rings Z600 Standar
> Sorry Toni i don't have any standard size.Alan
> To:
2cylinderhondas@yahoogroups.com
> From:
2cylinderhondas@yahoogroups.com
> Date: Tue, 14 Oct 2014 07:47:28 -0700
> Subject: RE: [2cylinderhondas] Rings Z600 Standar
> Hi Alan, I need standard

Alan Stanyon · Post by **Alan Stanyon** » Thu Oct 16, 2014 12:16 am

Whats wrong with your old rings Toni?
Alan To: 2cylinderhondas@yahoogroups.com From: 2cylinderhondas@yahoogroups.com Date: Wed, 15 Oct 2014 13:05:37 -0400 Subject: Re: [2cylinderhondas] Rings Z600 Standar
That even says that standard size is out of stock. =P
-s

On 0, "Alan Stanyon alanstanyon@... [2cylinderhondas]" wrote:
> Try Here http://www.cmsnl.com/honda-n600-sedan-1 ... tmlRegards Alan
> To: 2cylinderhondas@yahoogroups.com
> From: 2cylinderhondas@yahoogroups.com
> Date: Wed, 15 Oct 2014 06:16:36 +0000
> Subject: RE: [2cylinderhondas] Rings Z600 Standar
> Sorry Toni i don't have any standard size.Alan
> To: 2cylinderhondas@yahoogroups.com
> From: 2cylinderhondas@yahoogroups.com
> Date: Tue, 14 Oct 2014 07:47:28 -0700
> Subject: RE: [2cylinderhondas] Rings Z600 Standar
> Hi Alan, I need standard

Toni Perez · Post by **Toni Perez** » Thu Oct 16, 2014 1:48 am

Hi Alan.
One of them broke it. When I was opening the engine. ="="
El Jueves, 16 de octubre, 2014 9:16:02, "Alan Stanyon alanstanyon@... [2cylinderhondas]" escribi�:
Whats wrong with your old rings Toni?
Alan To: 2cylinderhondas@yahoogroups.com From: 2cylinderhondas@yahoogroups.com Date: Wed, 15 Oct 2014 13:05:37 -0400 Subject: Re: [2cylinderhondas] Rings Z600 Standar
That even says that standard size is out of stock. =P
-s

On 0, "Alan Stanyon alanstanyon@... [2cylinderhondas]" wrote:
> Try Here http://www.cmsnl.com/honda-n600-sedan-1 ... tmlRegards Alan
> To: 2cylinderhondas@yahoogroups.com
> From: 2cylinderhondas@yahoogroups.com
> Date: Wed, 15 Oct 2014 06:16:36 +0000
> Subject: RE: [2cylinderhondas] Rings Z600 Standar
> Sorry Toni i don't have any standard size.Alan
> To: 2cylinderhondas@yahoogroups.com
> From: 2cylinderhondas@yahoogroups.com
> Date: Tue, 14 Oct 2014 07:47:28 -0700
> Subject: RE: [2cylinderhondas] Rings Z600 Standar
> Hi Alan, I need standard

dereks600 · Post by **dereks600** » Thu Oct 16, 2014 5:45 am

Hastings lists the stock 74mm rings as part number 2C9500, I just spoke with them about some 1.0 mm oversize rings. I didn't check to see if those were cast iron, steel, chrome etc.

Scott Walters · Post by **Scott Walters** » Thu Oct 16, 2014 7:04 am

Hi Toni,
If you have rings shipped to me, I can re-ship them to you. Email me for my address.
Good luck!
-scott

On 0, "Toni Perez
tonipereztf@...
[2cylinderhondas]" wrote:
> Hi Alan.
> One of them broke it. When I was opening the engine. ????????
> El Jueves, 16 de octubre, 2014 9:16:02, "Alan Stanyon
alanstanyon@...
[2cylinderhondas]" escribi??:
> Whats wrong with your old rings Toni?
> Alan
> To:
2cylinderhondas@yahoogroups.com
> From:
2cylinderhondas@yahoogroups.com
> Date: Wed, 15 Oct 2014 13:05:37 -0400
> Subject: Re: [2cylinderhondas] Rings Z600 Standar
> That even says that standard size is out of stock. =P
> -s
> On 0, "Alan Stanyon
alanstanyon@...
[2cylinderhondas]" wrote:
> > Try Here
http://www.cmsnl.com/honda-n600-sedan-1 ... tmlRegards Alan
> > To:
2cylinderhondas@yahoogroups.com
> > From:
2cylinderhondas@yahoogroups.com
> > Date: Wed, 15 Oct 2014 06:16:36 +0000
> > Subject: RE: [2cylinderhondas] Rings Z600 Standar
> > Sorry Toni i don't have any standard size.Alan
> > To:
2cylinderhondas@yahoogroups.com
> > From:
2cylinderhondas@yahoogroups.com
> > Date: Tue, 14 Oct 2014 07:47:28 -0700
> > Subject: RE: [2cylinderhondas] Rings Z600 Standar
> > Hi Alan, I need standard

Miles Chappell · Post by **Miles Chappell** » Thu Oct 16, 2014 7:41 am

There is a Civic 1300 that uses 74mm rings also.
The top 2 rings are correct thickness but the oil ring is
3mm instead of 2.5mm which means machining the piston which any machine shop can do. I did it when I
built Michael B. engine. You can then use civic rings for future rebuilds and have spares because you get 4
boxes instead of 2 and cost about the same as I recall from Hastings brand.
Miles

Toni Perez · Post by **Toni Perez** » Thu Oct 16, 2014 8:23 am

Hi Scott, What do you mean? Do you want theat I send you my old rings? Why? They are broke?
El Jueves, 16 de octubre, 2014 15:41:07, "'Miles Chappell #10321' z600miles@... [2cylinderhondas]" escribi�:
There is a Civic 1300 that uses 74mm rings also.
The top 2 rings are correct thickness but the oil ring is
3mm instead of 2.5mm which means machining the piston which any machine shop can do. I did it when I
built Michael B. engine. You can then use civic rings for future rebuilds and have spares because you get 4
boxes instead of 2 and cost about the same as I recall from Hastings brand.
Miles

tonipereztf · Post by **tonipereztf** » Thu Oct 16, 2014 8:25 am

Hi Scott,
What do you mean? Do you want theat I send you my old rings? Why? They are broke?

Dr. Whiting · Post by **Dr. Whiting** » Thu Oct 16, 2014 9:42 am

Rings are in stock.
Sometimes people get sick and need time to recover!
I'm back on my feet and running to catch up with orders.
Patience is appreciated.
Bruce