N600 horn location

Archived posts from the 2 Cylinder Hondas Yahoo Group
Post Reply
dwb_07
Posts: 78
Joined: Sat May 05, 2012 11:33 pm

N600 horn location

Post by dwb_07 »

From the design on the mounting bracket I believe the horn on the N600 is bolted to the passengers strut tower. If this is true which of the (3) studs do I use. The one towards the firewall, engine bay or fender? All the pictures in my manual are of 360's and the horn is by the battery.
Many thanks for any help.
dm600z
Posts: 52
Joined: Wed Jan 23, 2013 4:40 am

Re: N600 horn location

Post by dm600z »

I looked at one of my sedans (and looked at some pictures in magazines) and it is mounted on the stud
nearest the windshield.  The horn is then pointed toward the intake manifold.
good luck,
Dale
PS  Are you familiar with Steve's website ?  Lots of  documents and pictures of these cars.
> From the design on the mounting bracket I believe the horn on the N600 is > bolted to the passengers strut tower. If this is true which of the (3) studs > do I use. The one towards the firewall, engine bay or fender? All the pictures > in my manual are of 360's and the horn is by the battery.
> Many thanks for
> any help.
dwb_07
Posts: 78
Joined: Sat May 05, 2012 11:33 pm

Re: N600 horn location

Post by dwb_07 »

Dale
thanks for the info. That is where I am going to put it. And yes, I have been to Steve's site. Got the N and Z parts books from there. They seem to be  accurate as compared to the ones at the dealers sites.
David
Post Reply