Cam Housing Gaskets!!!

[eric.geiger]

Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
More info to come!!!
Eric

[gary_electric]

Hi Eric,
On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
Gary

--- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> More info to come!!!
> Eric

[Eric Geiger]

The latest sample was just delivered yesterday need to do a test fit again and hopefully will have them in 2-3 weeks.
Main issue is I'm not selling much of the coupe ones currently which is tying up money.  I can't keep spending  2000$ to produce a batch of parts only to sell 500$ worth.
I'm well aware that there are few cars left on the road and I don't wanna charge high prices to make them affordable but I can't be sitting on thousands of dollars in inventory. It's a very fine line
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 9, 2013, at 8:36 AM, "gary_electric" wrote:
Hi Eric,
On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
Gary
--- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> More info to come!!!
> Eric

[richmccolman]

Hi Eric -- speaking for myself, I'd be interested in picking up a handful of coupe gaskets from you. (I'd be willing to plunk down $150-200 for a batch of them.) I can't speak for the other coupe owners, but I wouldn't be surprised if many of them would want to do the same, given that the gaskets are otherwise "unobtainium".
Keep us posted!
Richard

--- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> The latest sample was just delivered yesterday need to do a test fit again and hopefully will have them in 2-3 weeks.
> Main issue is I'm not selling much of the coupe ones currently which is tying up money. I can't keep spending 2000$ to produce a batch of parts only to sell 500$ worth.
> I'm well aware that there are few cars left on the road and I don't wanna charge high prices to make them affordable but I can't be sitting on thousands of dollars in inventory. It's a very fine line
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com On May 9, 2013, at 8:36 AM, "gary_electric" > wrote:
> Hi Eric,
> On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
> Gary
> --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> > More info to come!!!
> > Eric

[Eric Geiger]

Sounds great.   Mike oconnor has a set of them now and as soon as he says he likes them ill place the production run.   I'm hoping to have 100 of each made.
I appreciate your feedback on this.  I think you'll be really happy with them.  Here are some photos.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 13, 2013, at 6:38 AM, "richmccolman" wrote:
Hi Eric -- speaking for myself, I'd be interested in picking up a handful of coupe gaskets from you. (I'd be willing to plunk down $150-200 for a batch of them.) I can't speak for the other coupe owners, but I wouldn't be surprised if many of them would want to do the same, given that the gaskets are otherwise "unobtainium".
Keep us posted!
Richard
--- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> The latest sample was just delivered yesterday need to do a test fit again and hopefully will have them in 2-3 weeks.
> Main issue is I'm not selling much of the coupe ones currently which is tying up money. I can't keep spending 2000$ to produce a batch of parts only to sell 500$ worth.
> I'm well aware that there are few cars left on the road and I don't wanna charge high prices to make them affordable but I can't be sitting on thousands of dollars in inventory. It's a very fine line
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
www.prgnocturne.com
On May 9, 2013, at 8:36 AM, "gary_electric" > wrote:
> Hi Eric,
> On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
> Gary
> --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> > More info to come!!!
> > Eric

Note: 4 image(s) originally linked in this post are no longer available (cid:39A43C42-3262-4316-931B-A8AF29983265, cid:5D29BF2E-C824-42DD-A75B-6E4BA95CE844, cid:1AE74A81-6858-49BF-AF04-5D3F94E0A213 +1 more).

[Chas]

Hi Eric,
I would be interested in three or foru gasskets and happy to advance the money for these and possibly a spare.
Chas

--- In
2cylinderhondas@yahoogroups.com
, "richmccolman" wrote:
> Hi Eric -- speaking for myself, I'd be interested in picking up a handful of coupe gaskets from you. (I'd be willing to plunk down $150-200 for a batch of them.) I can't speak for the other coupe owners, but I wouldn't be surprised if many of them would want to do the same, given that the gaskets are otherwise "unobtainium".
> Keep us posted!
> Richard
> --- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> > The latest sample was just delivered yesterday need to do a test fit again and hopefully will have them in 2-3 weeks.
> > Main issue is I'm not selling much of the coupe ones currently which is tying up money. I can't keep spending 2000$ to produce a batch of parts only to sell 500$ worth.
> > I'm well aware that there are few cars left on the road and I don't wanna charge high prices to make them affordable but I can't be sitting on thousands of dollars in inventory. It's a very fine line
> > Eric J. Geiger
> > ---------------------------------------
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@
> > www.prgnocturne.com > On May 9, 2013, at 8:36 AM, "gary_electric" > wrote:
> > Hi Eric,
> > On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
> > Gary
> > --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > > Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> > > More info to come!!!
> > > Eric

[Eric Geiger]

No need to do advance payments.  I've got the money set aside for the production run.  I appreciate the offer though.
Thank you. Lead time is 3-4 weeks from when I give the go ahead to start production. Hoping to see them mid June.
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 13, 2013, at 7:47 AM, "Chas" wrote:
Hi Eric,
I would be interested in three or foru gasskets and happy to advance the money for these and possibly a spare.
Chas
--- In
2cylinderhondas@yahoogroups.com
, "richmccolman" wrote:
> Hi Eric -- speaking for myself, I'd be interested in picking up a handful of coupe gaskets from you. (I'd be willing to plunk down $150-200 for a batch of them.) I can't speak for the other coupe owners, but I wouldn't be surprised if many of them would want to do the same, given that the gaskets are otherwise "unobtainium".
> Keep us posted!
> Richard
> --- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> > The latest sample was just delivered yesterday need to do a test fit again and hopefully will have them in 2-3 weeks.
> > Main issue is I'm not selling much of the coupe ones currently which is tying up money. I can't keep spending 2000$ to produce a batch of parts only to sell 500$ worth.
> > I'm well aware that there are few cars left on the road and I don't wanna charge high prices to make them affordable but I can't be sitting on thousands of dollars in inventory. It's a very fine line
> > Eric J. Geiger
> > ---------------------------------------
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@
www.prgnocturne.com
> On May 9, 2013, at 8:36 AM, "gary_electric" > wrote:
> > Hi Eric,
> > On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
> > Gary
> > --- In
2cylinderhondas@yahoogroups.com
, "eric.geiger" wrote:
> > > Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> > > More info to come!!!
> > > Eric

[richmccolman]

Very good, Eric! I'll look forward to finding out when the gaskets are ready to go.
Richard

--- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> Sounds great. Mike oconnor has a set of them now and as soon as he says he likes them ill place the production run. I'm hoping to have 100 of each made.
> I appreciate your feedback on this. I think you'll be really happy with them. Here are some photos.
> [image.jpeg][image.jpeg][image.jpeg][image.jpeg]
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com On May 13, 2013, at 6:38 AM, "richmccolman" > wrote:
> Hi Eric -- speaking for myself, I'd be interested in picking up a handful of coupe gaskets from you. (I'd be willing to plunk down $150-200 for a batch of them.) I can't speak for the other coupe owners, but I wouldn't be surprised if many of them would want to do the same, given that the gaskets are otherwise "unobtainium".
> Keep us posted!
> Richard
> --- In
2cylinderhondas@yahoogroups.com
, Eric Geiger wrote:
> > The latest sample was just delivered yesterday need to do a test fit again and hopefully will have them in 2-3 weeks.
> > Main issue is I'm not selling much of the coupe ones currently which is tying up money. I can't keep spending 2000$ to produce a batch of parts only to sell 500$ worth.
> > I'm well aware that there are few cars left on the road and I don't wanna charge high prices to make them affordable but I can't be sitting on thousands of dollars in inventory. It's a very fine line
> > Eric J. Geiger
> > ---------------------------------------
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@
> > www.prgnocturne.com > On May 9, 2013, at 8:36 AM, "gary_electric" > wrote:
> > Hi Eric,
> > On the subject of rubber parts... How's production going on N600 jack handle holders and hood bumpers?
> > Gary
> > --- In
2cylinderhondas@yahoogroups.com
>, "eric.geiger" wrote:
> > > Just wanted to let everyone know the first batch of rubber cam housing gaskets for both coupes and sedans is complete. i am doing final testing on them now and will have a full production run ready in about 4-5 weeks. They are made from high quality Viton and are so close to the original NOS ones i have that i have to keep them away from each other so i don't mix them up.
> > > More info to come!!!
> > > Eric