4x110 wheels

sonny117 · Post by **sonny117** » Thu May 03, 2012 3:32 pm

Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

Eric Geiger · Post by **Eric Geiger** » Thu May 03, 2012 4:14 pm

http://www.tyresave.co.uk/alloyskn.html
I've already spoken to them and they will custom drill the 4x110 pattern at the factory and ship them to the usa.
i was quoted 640$USD for some 10" ones a few weeks ago
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 3, 2012, at 5:32 PM, sonny117@... wrote:
> Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

Eric Geiger · Post by **Eric Geiger** » Thu May 03, 2012 4:15 pm

try this link it might take you there more directly
http://www.tyresave.co.uk/minilite.html
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 3, 2012, at 5:32 PM, sonny117@... wrote:
> Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

dean m · Post by **dean m** » Thu May 03, 2012 4:31 pm

i got mine cheeper from minilite in the uk i think it was $450 with a special coating
From:
Eric Geiger
To:
""
Sent:
Thursday, May 3, 2012 4:14 PM
Subject:
Re: [2cylinderhondas] 4x110 wheels
http://www.tyresave.co.uk/alloyskn.html
I've already spoken to them and they will custom drill the 4x110 pattern at the factory and ship them to the usa.
i was quoted 640$USD for some 10" ones a few weeks ago
Eric J. Geiger
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 3, 2012, at 5:32 PM, sonny117@... wrote:
> Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

Eric Geiger · Post by **Eric Geiger** » Thu May 03, 2012 4:42 pm

Do u have contact info for anyone there that you dealt with?? Did they drill them to the correct pattern as well or did you use adapters. That's a great price got any pics of them on your car?
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 3, 2012, at 7:31 PM, "dean m" wrote:
i got mine cheeper from minilite in the uk i think it was $450 with a special coating
From:
Eric Geiger " Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

Eric Geiger · Post by **Eric Geiger** » Thu May 03, 2012 4:44 pm

Sorry just saw the picture now. What size did you end up ordering? 10" x 5" or 5.5"
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 3, 2012, at 7:31 PM, "dean m" wrote:
i got mine cheeper from minilite in the uk i think it was $450 with a special coating
From:
Eric Geiger " Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

dean m · Post by **dean m** » Thu May 03, 2012 5:33 pm

I think they are 5" and yes they drilled them for me ..... this is the usa dealer for them he is a great guy to deal with JBRITCARS@...
From:
Eric Geiger
To:
"" Cc:
"2cylinderhondas@yahoogroups.com"
Sent:
Thursday, May 3, 2012 4:44 PM
Subject:
Re: [2cylinderhondas] 4x110 wheels
Sorry just saw the picture now. What size did you end up ordering? 10" x 5" or 5.5"
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com

On May 3, 2012, at 7:31 PM, "dean m" wrote:
i got mine cheeper from minilite in the uk i think it was $450 with a special coating
From:
Eric Geiger " Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

JUAN CHAN · Post by **JUAN CHAN** » Sun May 06, 2012 12:14 pm

You could get cheaper rims and tires from minisportusa.com
I have an n600 and a classic mini copper. That's where I get most of my stuff
When it comes to wheels and tires.
Sent from my iPhone

On May 3, 2012, at 4:44 PM, "Eric Geiger" wrote:
Sorry just saw the picture now. What size did you end up ordering? 10" x 5" or 5.5"
Eric J. Geiger
---------------------------------------
PRG Nocturne
XXX-XXX-XXXX phone
XXX-XXX-XXXX fax
XXX-XXX-XXXX mobile
egeiger@...
www.prgnocturne.com
On May 3, 2012, at 7:31 PM, "dean m" wrote:
> i got mine cheeper from minilite in the uk i think it was $450 with a special coating
> From:
> Eric Geiger egeiger@...
> To:
> " 2cylinderhondas@yahoogroups.com
> >" 2cylinderhondas@yahoogroups.com
> Sent:
> Thursday, May 3, 2012 4:14 PM
> Subject:
> Re: [2cylinderhondas] 4x110 wheels
> http://www.tyresave.co.uk/alloyskn.html
> I've already spoken to them and they will custom drill the 4x110 pattern at the factory and ship them to the usa.
> i was quoted 640$USD for some 10" ones a few weeks ago
> Eric J. Geiger
> PRG Nocturne
> XXX-XXX-XXXX
> phone
> XXX-XXX-XXXX
> fax
> XXX-XXX-XXXX
> mobile
> egeiger@...
> www.prgnocturne.com
> On May 3, 2012, at 5:32 PM,
> sonny117@...
> wrote:
> > Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

JUAN CHAN · Post by **JUAN CHAN** » Sun May 06, 2012 12:23 pm

Some I the stuff for the classic mini copper are similar to the interior of the n600. Outside mirrors are cheaper. Just look around I've found that minisportusa.com comes in handy.. Tires vary from 10" - 13" that even carry racing 10" tires
Sent from my iPhone

On May 6, 2012, at 12:14 PM, "JUAN CHAN" wrote:
You could get cheaper rims and tires from
minisportusa.com
I have an n600 and a classic mini copper. That's where I get most of my stuff When it comes to wheels and tires.
Sent from my iPhone
On May 3, 2012, at 4:44 PM, "Eric Geiger" wrote:
> Sorry just saw the picture now. What size did you end up ordering? 10" x 5" or 5.5"
> Eric J. Geiger
> ---------------------------------------
> PRG Nocturne
> XXX-XXX-XXXX phone
> XXX-XXX-XXXX fax
> XXX-XXX-XXXX mobile
> egeiger@...
> www.prgnocturne.com
> On May 3, 2012, at 7:31 PM, "dean m" lt1ski@...
> > wrote:
> > i got mine cheeper from minilite in the uk i think it was $450 with a special coating
> > From:
> > Eric Geiger > egeiger@...
> > To:
> > " > 2cylinderhondas@yahoogroups.com
> > >" > 2cylinderhondas@yahoogroups.com
> > Sent:
> > Thursday, May 3, 2012 4:14 PM
> > Subject:
> > Re: [2cylinderhondas] 4x110 wheels
> > http://www.tyresave.co.uk/alloyskn.html
> > I've already spoken to them and they will custom drill the 4x110 pattern at the factory and ship them to the usa.
> > i was quoted 640$USD for some 10" ones a few weeks ago
> > Eric J. Geiger
> > PRG Nocturne
> > XXX-XXX-XXXX
> > phone
> > XXX-XXX-XXXX
> > fax
> > XXX-XXX-XXXX
> > mobile
> > egeiger@...
> > www.prgnocturne.com
> > On May 3, 2012, at 5:32 PM,
> > sonny117@...
> > wrote:
> > > Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

JUAN CHAN · Post by **JUAN CHAN** » Sun May 06, 2012 12:35 pm

Ohh And I forgot to mention they also sale minilites
In Any size you want Sent from my iPhone

On May 6, 2012, at 12:23 PM, "JUAN CHAN" wrote:
Some I the stuff for the classic mini copper are similar to the interior of the n600. Outside mirrors are cheaper. Just look around I've found that minisportusa.com comes in handy.. Tires vary from 10" - 13" that even carry racing 10" tires
Sent from my iPhone
On May 6, 2012, at 12:14 PM, "JUAN CHAN" wrote:
> You could get cheaper rims and tires from
> minisportusa.com
> I have an n600 and a classic mini copper. That's where I get most of my stuff > When it comes to wheels and tires.
> Sent from my iPhone
> On May 3, 2012, at 4:44 PM, "Eric Geiger" egeiger@...
> > wrote:
> > Sorry just saw the picture now. What size did you end up ordering? 10" x 5" or 5.5"
> > Eric J. Geiger
> > ---------------------------------------
> > PRG Nocturne
> > XXX-XXX-XXXX phone
> > XXX-XXX-XXXX fax
> > XXX-XXX-XXXX mobile
> > egeiger@...
> > www.prgnocturne.com
> > On May 3, 2012, at 7:31 PM, "dean m" > lt1ski@...
> > > wrote:
> > > i got mine cheeper from minilite in the uk i think it was $450 with a special coating
> > > From:
> > > Eric Geiger > > egeiger@...
> > > To:
> > > " > > 2cylinderhondas@yahoogroups.com
> > > >" > > 2cylinderhondas@yahoogroups.com
> > > Sent:
> > > Thursday, May 3, 2012 4:14 PM
> > > Subject:
> > > Re: [2cylinderhondas] 4x110 wheels
> > > http://www.tyresave.co.uk/alloyskn.html
> > > I've already spoken to them and they will custom drill the 4x110 pattern at the factory and ship them to the usa.
> > > i was quoted 640$USD for some 10" ones a few weeks ago
> > > Eric J. Geiger
> > > PRG Nocturne
> > > XXX-XXX-XXXX
> > > phone
> > > XXX-XXX-XXXX
> > > fax
> > > XXX-XXX-XXXX
> > > mobile
> > > egeiger@...
> > > www.prgnocturne.com
> > > On May 3, 2012, at 5:32 PM,
> > > sonny117@...
> > > wrote:
> > > > Hello everyone, I own a z600 and a n600 along with 4 other trucks that have the 4x110 bolt pattern. Does anyone know where i can find a nice oldschool set of wheels in either 10,12 or 13 inch? not interested in any steel wheels. Thanks, Sonny

Honda600Forum.com

4x110 wheels

4x110 wheels

Re: 4x110 wheels

Re: 4x110 wheels

Re: 4x110 wheels

Re: 4x110 wheels [1 Attachment]

Re: 4x110 wheels [1 Attachment]

Re: 4x110 wheels

Re: 4x110 wheels

Re: 4x110 wheels

Re: 4x110 wheels