Looking for a n600 in Atlanta, GA

Archived posts from the 2 Cylinder Hondas Yahoo Group
Post Reply
dawn_and_darrian
Posts: 0
Joined: Thu Nov 20, 2014 11:33 pm

Looking for a n600 in Atlanta, GA

Post by dawn_and_darrian »

A friend of mine is looking for a n600 in Atlanta, Georgia, or somewhat close. He's willing to drive to get it. The only requirement is that it has little or at least fixable rust. Working engine is optional.
mterrens
Posts: 2
Joined: Sat Jan 22, 2005 10:36 am

Re: Looking for a n600 in Atlanta, GA

Post by mterrens »

Well there are two on ebay, both not as pretty as he would like, on the east coast...at least they are both cheap.
Georgia --- http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0016422431
Virginia --- http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0017516719
Good luck!
Steve
dawn_and_darrian
Posts: 0
Joined: Thu Nov 20, 2014 11:33 pm

Re: Looking for a n600 in Atlanta, GA

Post by dawn_and_darrian »

Sadly he went to look at the first one (the green one) and it is so badly rusted that he might buy it just for parts. The floorboards and trunk are rusted all of the way through, so it's not a really good candidate for a running car.
Steve
Posts: 25
Joined: Tue Feb 24, 2004 6:05 am

Re: Looking for a n600 in Atlanta, GA

Post by Steve »

156000 miles? Get outta here!!! That yellow one is rough...
shdunnnm
Posts: 5
Joined: Fri Aug 14, 2015 4:11 am

Re: Looking for a n600 in Atlanta, GA

Post by shdunnnm »

I'm the friend. Thanks for posting this Matt!
I did end up buying the green one. I'm going to have it delivered to
my house tomorrow. I will probably try to get this one running and
mechanically sound, but before I dive into fixing aesthetics and
cosmetics, I want to find a chassis with fixable (surface) rust to no
rust.
In the mean time, I think I'm going to try to get some parts for this
one to get it somewhat road worthy, like wheels, tires, oil cap, gas
cap, etc.
dawn_and_darrian
Posts: 0
Joined: Thu Nov 20, 2014 11:33 pm

Re: Looking for a n600 in Atlanta, GA

Post by dawn_and_darrian »

If you check the database on the actual yahoo group, there is a database of parts interchange for the n600. I think most of the parts you will need are there, except for the oil cap. Might have to call Mike, Bill, or Tim Mings to get one of those.
Post Reply