Re: Nothing at all

Legacy yahoo archive through 2019. Please don't post new topics here.

Moderator: forumadmin

Post Reply
danconklin6
Posts: 4
Joined: Mon Mar 26, 2007 6:00 am

Nothing at all

Post by danconklin6 »

My son left his lights on in his Z600, two days later his battery was
dead. He got a jump and drove off. He made it to the first stop sign
and the car died. He tried to push start it but had the key turned off
so that didn't work. lol. He then got another jump but reversed the
polarity. Now he has nothing, "nothing at all". The battery has been
completely charged up and he still has nothing. So what do I have to
buy, get, or fix? If it is complicated could you please send a pic
too. Thanks in advance for your help.
Dan
goinhm
Posts: 217
Joined: Wed Feb 05, 2003 4:57 pm

Re: Nothing at all

Post by goinhm »

Have you checked the primary fuse?  It is a 45 amp fusible link and can be found by following your positive battery cable.  One section of the cable goes to the starter solenoid and the other section of the cable goes to the primary fuse.    What do you mean by "nothing at all"?     Can you measure voltage at the battery?    Can you measure voltage at the solenoid?    Can you measure voltage at the cigarette lighter?    Do the lights turn on?    It isn't difficult to resolve your problem but I need more detail.   good luck with the troubleshooting, Dale
My son left his lights on in his Z600, two days later his battery was
dead. He got a jump and drove off. He made it to the first stop sign
and the car died. He tried to push start it but had the key turned off
so that didn't work. lol. He then got another jump but reversed the
polarity. Now he has nothing, "nothing at all". The battery has been
completely charged up and he still has nothing. So what do I have to
buy, get, or fix? If it is complicated could you please send a pic
too. Thanks in advance for your help.
 
Post Reply