Re: cleaning

Legacy yahoo archive through 2019. Please don't post new topics here.

Moderator: forumadmin

Post Reply
Greg Prentice
Posts: 0
Joined: Thu Nov 12, 2015 11:34 pm

cleaning

Post by Greg Prentice »

Hello all.   I have my N600 engine torn apart and have started tackling the parts cleaning.   Does anyone have an easy method to clean cooling fins – maybe soaking the cyinder barrel in something??   Thanks.   Greg Prentice Toromont Power Systems 905 488 2571  
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Bob Prentice
Posts: 0
Joined: Tue Feb 16, 2016 10:41 am

Re: cleaning

Post by Bob Prentice »

Spray Varsol, Small wire brush and patience. There's no easy way. You should know that by now! rp
On Tue, Feb 16, 2016 at 8:49 PM, Greg Prentice GPrentice@... [anzhonda600owners] wrote:

Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid?r?s comme confidentiels ou juridiquement privil?gi?s. Si vous n'?tes pas le destinataire d?sign? du pr?sent message, soyez avis? que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm?diatement par courriel ? l'adresse corpmail@... ou par t?l?phone (? frais vir?s si n?cessaire). Veuillez effacer ce courriel et toute copie ?ventuelle. Merci pour votre coop?ration.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Bill
Posts: 198
Joined: Sun Apr 09, 2006 9:34 am

Re: cleaning

Post by Bill »

I used a transmission shop to clean them, but they still came out different shades of gray, not shinny.  Bill
From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Tuesday, February 16, 2016 6:42 PM
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] cleaning

 
Spray Varsol, Small wire brush and patience. There's no easy way. You should know that by now!  rp
On Tue, Feb 16, 2016 at 8:49 PM, Greg Prentice GPrentice@... [anzhonda600owners] wrote:
 
Hello all.   I have my N600 engine torn apart and have started tackling the parts cleaning.   Does anyone have an easy method to clean cooling fins – maybe soaking the cyinder barrel in something??   Thanks.   Greg Prentice Toromont Power Systems 905 488 2571  
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid?r?s comme confidentiels ou juridiquement privil?gi?s. Si vous n'?tes pas le destinataire d?sign? du pr?sent message, soyez avis? que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm?diatement par courriel ? l'adresse corpmail@... ou par t?l?phone (? frais vir?s si n?cessaire). Veuillez effacer ce courriel et toute copie ?ventuelle. Merci pour votre coop?ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Jeanie Tucker
Posts: 0
Joined: Fri Dec 18, 2015 7:41 am

Re: cleaning

Post by Jeanie Tucker »

As for most parts cleaning I have a "Benchtop pro" a really good cleaning system. I am at the point of cleaning my cooling fins also and was HOPING that bead blasting would work. I also have an aluminim cleaner from NAPA called alluminim brightner, I am not really thrilled with it.I can smell acid in it so maby??????? a mild meriatic acid??? any thoughts on mild acid besides be safe. thanks Jay
----- Original Message ----- From: GPrentice@... [anzhonda600owners] To: anzhonda600owners@yahoogroups.com Sent: Tuesday, February 16, 2016 8:49 PM Subject: [anzhonda600owners] cleaning
 
Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.


Image This email is free from viruses and malware because avast! Antivirus protection is active.
Greg Prentice
Posts: 0
Joined: Thu Nov 12, 2015 11:34 pm

Re: cleaning

Post by Greg Prentice »

I have used oven cleaner to clean aluminum parts with great success with no damage to surfaces. I will try that on the fins.   From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 8:31 AM
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] cleaning     As for most parts cleaning I have a "Benchtop pro" a really good cleaning system. I am at the point of cleaning my cooling fins also and was HOPING that bead blasting would work. I also have an aluminim cleaner from NAPA called alluminim brightner, I am not really thrilled with it.I can smell acid in it so maby??????? a mild meriatic acid??? any thoughts on mild acid besides be safe. thanks Jay
----- Original Message ----- From: GPrentice@...%20[anzhonda600owners] To: anzhonda600owners@yahoogroups.com Sent: Tuesday, February 16, 2016 8:49 PM Subject: [anzhonda600owners] cleaning     Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins – maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.   Image
This email is free from viruses and malware because avast! Antivirus protection is active.  
Bill
Posts: 198
Joined: Sun Apr 09, 2006 9:34 am

Re: cleaning

Post by Bill »

Attachments :
  1. Engine finished 3-a.jpg
The transmission shop uses a citric acid solution in their cleaning rack.  Parts are hung on the rack with the solution sprayed under pressure to cut through the crud.  But even then not everything is removed and there is some scraping.  However all the grease is gone.  Glass bead like sand blasting gets into everything and everything then needs to be cleaned again.  But as I said earlier, any acid causes everything to come out in different shades of gray.   So I paint the exterior of the engine cases, cylinders and such to give them a fresh aluminum look.  Bill    
From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 7:26 AM
To: anzhonda600owners@yahoogroups.com
Subject: RE: [anzhonda600owners] cleaning

 
I have used oven cleaner to clean aluminum parts with great success with no damage to surfaces. I will try that on the fins. From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 8:31 AM
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] cleaning   As for most parts cleaning I have a "Benchtop pro" a really good cleaning system. I am at the point of cleaning my cooling fins also and was HOPING that bead blasting would work. I also have an aluminim cleaner from NAPA called alluminim brightner, I am not really thrilled with it.I can smell acid in it so maby??????? a mild meriatic acid??? any thoughts on mild acid besides be safe. thanks Jay
----- Original Message ----- From: GPrentice@...%20[anzhonda600owners] To: anzhonda600owners@yahoogroups.com Sent: Tuesday, February 16, 2016 8:49 PM Subject: [anzhonda600owners] cleaning   Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511. Image
This email is free from viruses and malware because avast! Antivirus protection is active.
Harry Lineback
Posts: 0
Joined: Sun Feb 01, 2004 10:07 pm

Re: cleaning [1 Attachment]

Post by Harry Lineback »

GREAT advice Mr.Bill....you "stuff" looks very SUPER nice. Harry Lineback 619-890-5861 mobile

On Wednesday, February 17, 2016 7:50 AM, "'Bill' billmyong@... [anzhonda600owners]" wrote:


  [Attachment(s) from Bill included below] The transmission shop uses a citric acid solution in their cleaning rack.  Parts are hung on the rack with the solution sprayed under pressure to cut through the crud.  But even then not everything is removed and there is some scraping.  However all the grease is gone.  Glass bead like sand blasting gets into everything and everything then needs to be cleaned again.  But as I said earlier, any acid causes everything to come out in different shades of gray.   So I paint the exterior of the engine cases, cylinders and such to give them a fresh aluminum look.  Bill    
From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 7:26 AM
To: anzhonda600owners@yahoogroups.com
Subject: RE: [anzhonda600owners] cleaning

  I have used oven cleaner to clean aluminum parts with great success with no damage to surfaces. I will try that on the fins. From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 8:31 AM
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] cleaning   As for most parts cleaning I have a "Benchtop pro" a really good cleaning system. I am at the point of cleaning my cooling fins also and was HOPING that bead blasting would work. I also have an aluminim cleaner from NAPA called alluminim brightner, I am not really thrilled with it.I can smell acid in it so maby??????? a mild meriatic acid??? any thoughts on mild acid besides be safe. thanks Jay
----- Original Message ----- From: GPrentice@...%20[anzhonda600owners] To: anzhonda600owners@yahoogroups.com Sent: Tuesday, February 16, 2016 8:49 PM Subject: [anzhonda600owners] cleaning   Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571 This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511. Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511. Image This email is free from viruses and malware because avast! Antivirus protection is active.
#ygrps-yiv-1431835950
Bryan O_Shaughnessy
Posts: 36
Joined: Mon Feb 10, 2014 5:33 am

Re: cleaning

Post by Bryan O_Shaughnessy »

Harry: Bill's advice is good, but I would caution you to BE SURE that any threads or oil-passages are plugged up when giving parts any "blasting" treatment.  You don't want any leftover sand or beads floating around or blocking things.  Just a caution.  --Bryan

From: "Harry Lineback harryl1190@... [anzhonda600owners]"
To: "anzhonda600owners@yahoogroups.com"
Sent: Wednesday, February 17, 2016 9:54 AM
Subject: Re: [anzhonda600owners] cleaning

  GREAT advice Mr.Bill....you "stuff" looks very SUPER nice. Harry Lineback 619-890-5861 mobile

On Wednesday, February 17, 2016 7:50 AM, "'Bill' billmyong@... [anzhonda600owners]" wrote:


  [Attachment(s) from Bill included below] The transmission shop uses a citric acid solution in their cleaning rack.  Parts are hung on the rack with the solution sprayed under pressure to cut through the crud.  But even then not everything is removed and there is some scraping.  However all the grease is gone.  Glass bead like sand blasting gets into everything and everything then needs to be cleaned again.  But as I said earlier, any acid causes everything to come out in different shades of gray.   So I paint the exterior of the engine cases, cylinders and such to give them a fresh aluminum look.  Bill    
From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 7:26 AM
To: anzhonda600owners@yahoogroups.com
Subject: RE: [anzhonda600owners] cleaning

  I have used oven cleaner to clean aluminum parts with great success with no damage to surfaces. I will try that on the fins. From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]
Sent: Wednesday, February 17, 2016 8:31 AM
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] cleaning   As for most parts cleaning I have a "Benchtop pro" a really good cleaning system. I am at the point of cleaning my cooling fins also and was HOPING that bead blasting would work. I also have an aluminim cleaner from NAPA called alluminim brightner, I am not really thrilled with it.I can smell acid in it so maby??????? a mild meriatic acid??? any thoughts on mild acid besides be safe. thanks Jay ----- Original Message ----- From: GPrentice@...%20[anzhonda600owners] To: anzhonda600owners@yahoogroups.com Sent: Tuesday, February 16, 2016 8:49 PM Subject: [anzhonda600owners] cleaning   Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571 This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511. Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511. Image This email is free from viruses and malware because avast! Antivirus protection is active.


#ygrps-yiv-1625870751
zinc2u
Posts: 0
Joined: Tue Jan 15, 2013 4:45 am

Re: cleaning

Post by zinc2u »

 Hi  Greg,         What is your goal on the engine cleaning?   Is it to clean off the grime and improve the heat transfer or are you trying to achieve a "new" look?  The Honda 600 engines had a coating on the aluminum which turns yellow/brown/dull gray with age.           If you want to clean it to improve the heat transfer,  you can use cleaners such as Gunk or steam clean it or use a brush & solvent.  The aluminum will still be dscolored.   You can also have an engine machine shop cold tank it for you in their cleaning solution.          If you are looking for the new look, you can clean up as described above and then have it bead blasted.  This will remove the coating but will give you the new look.  Without the coating,  you will be not have the aluminum protection unless you find another coating or spend lots of money to have the aluminum anodized.   good luck, Dale      
From: GPrentice@...%20[anzhonda600owners] To: anzhonda600owners@yahoogroups.com Sent: Tuesday, February 16, 2016 8:49 PM Subject: [anzhonda600owners] cleaning   Hello all. I have my N600 engine torn apart and have started tackling the parts cleaning. Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something?? Thanks. Greg Prentice Toromont Power Systems 905 488 2571
This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511.
Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7 www.toromont.com (416)667-5511. Image
This email is free from viruses and malware because avast! Antivirus protection is active.

Greg Prentice
Posts: 0
Joined: Thu Nov 12, 2015 11:34 pm

Re: cleaning

Post by Greg Prentice »

Attachments :







Thanks Dale.
 
My reasons are all cosmetic..
 
I will try the things you suggest.
 
Thanks again .
 


From: anzhonda600owners@yahoogroups.com [mailto:anzhonda600owners@yahoogroups.com]

Sent: Thursday, February 18, 2016 7:54 PM
To: anzhonda600owners@yahoogroups.com
Subject: Re: [anzhonda600owners] cleaning


 
 




 Hi  Greg,


 


      What is your goal on the engine cleaning?   Is it to clean off the grime and improve the heat transfer or are you trying to achieve a "new" look?  The Honda
600 engines had a coating on the aluminum which turns yellow/brown/dull gray with age. 



 


       If you want to clean it to improve the heat transfer,  you can use cleaners such as Gunk or steam clean it or use a brush & solvent.  The aluminum will still
be dscolored.   You can also have an engine machine shop cold tank it for you in their cleaning solution.


 


       If you are looking for the new look, you can clean up as described above and then have it bead blasted.  This will remove the coating but will give you the
new look.  Without the coating,  you will be not have the aluminum protection unless you find another coating or spend lots of money to have the aluminum anodized.


 


good luck,


Dale


 


 


 












From:
GPrentice@...%20[anzhonda600owners]


To:
anzhonda600owners@yahoogroups.com


Sent: Tuesday, February 16, 2016 8:49 PM


Subject: [anzhonda600owners] cleaning

 



Hello all.
I have my N600 engine torn apart and have started tackling the parts cleaning.
Does anyone have an easy method to clean cooling fins maybe soaking the cyinder barrel in something??
Thanks.
Greg Prentice
Toromont Power Systems
905 488 2571


This e-mail and any attachments may be confidential or legally privileged. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action
in reliance on the contents of this information is strictly prohibited. Please notify us immediately by email at
corpmail@... or by telephone (collect if necessary). Please delete this email and destroy any copies. Thank you for your cooperation.
Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7
www.toromont.com
(416)667-5511.

Ce courriel, ainsi que tous les fichiers joints, sont consid r s comme confidentiels ou juridiquement privil gi s. Si vous n' tes pas le destinataire d sign du pr sent message, soyez avis
que toute divulgation, copie, distribution ou action se fondant sur le contenu est strictement interdite. Veuillez nous en aviser imm diatement par courriel l'adresse
corpmail@... ou par t l phone ( frais vir s si n cessaire). Veuillez effacer ce courriel et toute copie ventuelle. Merci pour votre coop ration. 

Toromont Industries Ltd., 3131 Highway 7 West, Concord, ON, L4K 1B7
www.toromont.com
(416)667-5511.








[img]cid:~WRD000.jpg[/img]



This email is free from viruses and malware because

avast! Antivirus
protection is active.



Post Reply