Brake Booster

[rveggie]

Need help to find good used late model brake booster or good
rebuilder
1972 Az600

Thanks

Ray

[feltonminicycle]

All USA coupe boosters are same

--- In 2cylinderhondas@yahoogroups.com, "rveggie" wrote:
>
> Need help to find good used late model brake booster or good
> rebuilder
> 1972 Az600
>
> Thanks
>
> Ray
>

[Ryan Powell]

Attachments :

1. Document1-15132.docx

How do you get part number 4 out? the relay piston assy. Mine is frozen.
Schematic attahced

[Eric Geiger]

I used a small drill bit and was able to drill it out to the point where it became unfrozen then just used a new one.   Miles used to make new ones otherwise u can probably get one used somewhere. 

------------------------------------------
Eric Geiger PRG-Nocturne
262-366-3997 Egeiger@...
On Dec 14, 2014, at 5:13 PM, Ryan Powell ryanpowell96@... [anzhonda600owners] wrote:

 




How do you get part number 4 out? the relay piston assy. Mine is frozen.
Schematic attahced

[Eric Geiger]

Let me clear that up I used a drill bit/easy out to yank it out.  I didn't drill it out to the point where the drill bit touched the wall of the brake booster cylinder. 

------------------------------------------
Eric Geiger PRG-Nocturne
262-366-3997 Egeiger@...
On Dec 14, 2014, at 5:17 PM, Eric Geiger egeiger@... [2cylinderhondas] wrote:

 
I used a small drill bit and was able to drill it out to the point where it became unfrozen then just used a new one.   Miles used to make new ones otherwise u can probably get one used somewhere. 

------------------------------------------
Eric Geiger PRG-Nocturne
262-366-3997 Egeiger@...
On Dec 14, 2014, at 5:13 PM, Ryan Powell ryanpowell96@... [anzhonda600owners] wrote:

 




How do you get part number 4 out? the relay piston assy. Mine is frozen.
Schematic attahced

[David Brink]

I have had success boiling master cylinders in water. Brake fluid is water soluble and there is the heat expanding things a bit.

On Sun, Dec 14, 2014 at 3:19 PM, Eric Geiger egeiger@... [2cylinderhondas] wrote:
Let me clear that up I used a drill bit/easy out to yank it out. I didn't drill it out to the point where the drill bit touched the wall of the brake booster cylinder.

------------------------------------------
Eric Geiger PRG-Nocturne
262-366-3997 Egeiger@...
On Dec 14, 2014, at 5:17 PM, Eric Geiger egeiger@... [2cylinderhondas] wrote:


I used a small drill bit and was able to drill it out to the point where it became unfrozen then just used a new one. Miles used to make new ones otherwise u can probably get one used somewhere.

------------------------------------------
Eric Geiger PRG-Nocturne
262-366-3997 Egeiger@...
On Dec 14, 2014, at 5:13 PM, Ryan Powell ryanpowell96@... [anzhonda600owners] wrote:






How do you get part number 4 out? the relay piston assy. Mine is frozen.
Schematic attahced

[ryanpowell96]

Does anyone have part number 4 for sale?

Sent from my Samsung Galaxy Note II

-------- Original message --------From: Ryan Powell Date:12/14/2014 5:13 PM (GMT-06:00) To: 2cylinderhondas@yahoogroups.com, anzhonda600owners@yahoogroups.com Subject: Brake Booster




How do you get part number 4 out? the relay piston assy. Mine is frozen.
Schematic attahced

[Eric Geiger]

I'm sure I have one but again everything of mine is in storage so it'll probably be a week before I could look 

------------------------------------------
Eric Geiger PRG-Nocturne
262-366-3997 Egeiger@...
On Dec 14, 2014, at 7:35 PM, ryanpowell96 ryanpowell96@... [anzhonda600owners] wrote:

 
Does anyone have part number 4 for sale?

Sent from my Samsung Galaxy Note® II

-------- Original message -------- From: Ryan Powell Date:12/14/2014 5:13 PM (GMT-06:00) To: 2cylinderhondas@yahoogroups.com, anzhonda600owners@yahoogroups.com Subject: Brake Booster




How do you get part number 4 out? the relay piston assy. Mine is frozen.
Schematic attahced

[Eric Geiger]

I found the booster part 4 that I had originally pulled out before replacing it with a new one.  It's got a tiny hole in the top from the easy out but if u want it it's yours for free just cover shipping.  Email me direct.  

------------------------------------------


Eric Geiger
PRG-Nocturne
262-366-3997

Egeiger@...



On Dec 14, 2014, at 5:17 PM, Eric Geiger egeiger@... [2cylinderhondas] wrote:

 



I used a small drill bit and was able to drill it out to the point where it became unfrozen then just used a new one.   Miles used to make new ones otherwise u can probably get one used somewhere. 

------------------------------------------


Eric Geiger
PRG-Nocturne
262-366-3997

Egeiger@...



On Dec 14, 2014, at 5:13 PM, Ryan Powell ryanpowell96@... [anzhonda600owners] wrote:



 





























How do you get part number 4 out? the relay piston assy. Mine is frozen.




Schematic attahced

[shdunnnm]

Does anyone have replacement diaphragms for the power chamber (big chamber) of a mid-series 5F5 Booster?

Skip